A life ring is a symbol for safety and lifesaving, but it also stands for everything that has to do with water, seafaring and boating. Lifebuoys are used in ocean shipping, inland shipping and as life-saving equipment onshore. Also in swimming pools, on the beach or in endangered areas of harbours and locks, a solid life buoy box with an instruction sign and a solid rescue pole with hook must comply with legal regulations. In most cases, this will be a PE plastic lifebuoy with DIN/SOLAS certification. Not only maritime decoration is red and white striped life rings, consisting of buoyancy foam and a weatherproof fabric cover. These are nautical style classics on traditional ships often labelled with boat name and home port. Onboard yachts a lifebuoy is often carried in a bracket and additionally equipped with a lifeline and a buoy light or drift light. U shape life buoys serve the same purpose and are quite popular in boating. On traditional sailing ships or commercial vessels, such as ferries or passenger boats, in addition to lifebuoys, life rafts are mandatory.
- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Lifebuoys & safety lines
INTERNATIONAL lifebuoy made of orange-red PE hard plastic. The ring is particularly hard-wearing and weather-resistant. It is equipped with four all-round reflective strips and an all-round grab line.This 4 kg rescue ring is intended for use with a MOB light-smoke signal.Labeling with adhesive letters is possible (see accessories).The lifebuoy has CE and MED approval (certificates under "Downloads").The ring is also available in a lighter (2.5 kg) version (see "Similar products").Technical features:Maximum discharge height: 80 mOuter diameter: 73 cmInner diameter: 44 cmWeight: 4 kg
INTERNATIONAL lifebuoy made of orange-red PE hard plastic. The ring is particularly hard-wearing and weather-resistant. It is fitted with two reflective strips in four positions on the front and back of the ring and has an all-round grab line.Labeling with adhesive letters is possible (see "Accessories & spare parts").The lifebuoy has CE and MED approval (certificate under "Downloads") and complies with DIN EN14144.The ring is also available in a heavier (4 kg) version, which can be supplemented with a MOB light-smoke signal (see "Related articles").Technical features:Maximum discharge height: 80 mOuter diameter: 73 cmInner diameter: 44 cmWeight: 2.5 kg
All TOPLICHT lifebuoys can be custom-labeled with the ship’s name, home port, or other text. For the lettering, a special weather-resistant black film is applied using a hot-air application process. We use the traditional HELVETICA font in uppercase letters.Important information for the ordering process:The base price for lettering includes 30 letters .A lifebuoy must be ordered separately ( see related items).Please enter the desired text in the“Add Comments” field when completing your order.Please also specify whether the text should be placed “top” or “bottom” on the ring.The lettering is applied to one side. If you want the ring printed on both sides, the lettering must be ordered separately for each side.Each item is custom-made, so please allow approximately 10 days for processing.Other fonts, colors, or even a custom logo are possible; we’d be happy to provide a quote for these options.
Lifebuoy in classic red and white colour scheme.The ring is made of closed-cell buoyancy foam. It is not painted, but covered with a weatherproof plastic fabric. The fabric is red and white.The lifebuoy is equipped with a circumferential white grab line made of polypropylene (PP) cordage.Lettering is also possible, as is additional equipment with reflective stripes (see "Similar products" below).
Lifebuoy made of orange-red PE hard plastic. The ring is particularly hard-wearing and weather-resistant. It is covered with four all-round reflective strips and has an all-round lanyard.It can be labeled with adhesive letters (see "Accessories & spare parts").The lifebuoy has CE and MED approval (certificate under "Downloads") and complies with DIN EN14144:2025 and the requirements for rescue equipment according to DGUV, working on water according to BG BAU.Technical features:Maximum drop height: 60 mOuter diameter: 73 cmInner diameter: 43 cmWeight: 2.5 kg
Classic life ring made from closed cell buoyancy foam protected by a weather proof cover of red / white cloth material.The ring is not painted.With white grab line from polypropylene (PP) and four reflective stripes.
Life raft from the brand manufacturer LALIZAS with various approvals, such as EEP (4232/46/00). See also further down on this page under "Downloads & Information".The collective life raft has a rigid polyethylene (PE) shell and is filled with polystyrene foam. These materials guarantee a long service life.The cover has a bright orange signal colour. The all-round safety line is fitted with plastic handles.The life raft is available in three sizes: for four, eight or twelve people.Volume: 80 litres (raft for four people), 151 litres (eight people), 252 litres (twelve people).Weight: 5 kg (raft for 4 people), 11 kg (eight people), 18 kg (twelve people).
DNV-certified. Weather-resistant and durable lifebuoy made of white rigid PE plastic.Features a white grip rope running around the circumference and four red reflective stripes.
Heavy-duty bracket made of seawater-resistant light metal, rivet construction. The lifebuoy holder is suitable for all lifebuoys with a diameter of 75 cm (INTERNATIONAL type).The bracket is suitable for wall mounting. A 3-piece clamp set for tubes from 15 mm to 22 mm is available for mounting on the railing.Weight: 1.06 kg
Lifebuoy housing in a closed design with a hinged lid containing a small viewing window.The housing meets the requirements of DIN ISO 18421:2016 "Ships and marine technology - Inland navigation vessels - Housing for lifebuoys".The housing is made of thick-walled PE plastic. The lid is equipped with sturdy hinges and a storm-proof rubber closure. There is a sticker in the middle of the lid with the "Rescue of drowning persons" instructions from the German Social Accident Insurance (DGUV).The lifebuoy case offers space for a lifebuoy with a diameter of 75 cm in accordance with DIN/SOLAS plus a 30 m long throw line.It is supplied without contents (lifebuoy, line) and without fastening material.The housing is designed for wall, post or railing mounting. A suitable post and corresponding mounting sets can be found under"Accessories & spare parts".Technical featuresDimensions (L x W x H): 900 x 900 x 240 mmWeight: 10.6 kgColor: orange
Emergency light for man-overboard emergencies.The lifebuoy light is connected to the lifebuoy and thrown behind the person in the water. Once in the water, the light automatically straightens itself. A ball toggle switch automatically activates the light.The housing is made of orange-red plastic. The conventional light bulb with E10 socket (4.8 volts / 0.75 ampere) produces a continuous light with a light intensity of 2 candela for at least two hours.The lamp has MED approval. The safe discharge height is 30 meters.The lamp is supplied WITHOUT the required 4 alkaline batteries 1.5 volt, type UM1(LR20), safety cord and holder (see "Accessories & spare parts").
Made from strong matte bronze for the hanging-up of rope, fenders, boat hooks, oars, etc.Delivery without the pictured cordage.
Fastening options for the lifebuoy container (article no. 3204-010). The lifebuoy housing can be attached either to a post or to bars (railing, banister) with a diameter of 25 mm.The hot-dip galvanised post (2000x100x50 mm) has a base (300x300 mm). There are four slotted holes (diameter 14 mm) in the base.The post assembly set includes four brackets and four hexagonal threaded screws for attaching the lifebuoy container to the post.With the railing assembly set, the lifebuoy container can be attached to tubes with a diameter of 25 mm (e.g. railing or banister) using the four brackets and eight threaded screws.
Sturdy, classic bracket by DAVEY London.Made of 4 mm thick brass with three holes for wall mounting.Suitable for all lifebuoys or lines.
Bracket for life rings, PFDs, or lifejackets.Stainless-steel bracket for attachment to the railing tube ∅ 19-33mm.Secured with a belt strap.
Safty instructions from "Berufgenossenschaft Verkehr" (BGV) for saving drowning persons.Available in three versions:- Waterproof panel (30 x 42 cm)- Adhesive label (30 x 42 cm) or round (diameter 25 cm and 37 cm) for life buoy boxes
Stainless steel holder for life rings.Also well suited for hanging rope, fenders, tools, etc.
Life ring bracket. Made from durable black plastic. Set with three brackets that can be screwed to the cabin walls or bulkhead and in which the life ring can be securely inserted. For life rings with interior diameters of 35-46 cm. Bracket depth 93 mm.
Bracket for life rings, PFDs, or lifejackets. Clip for attachment to the railing. Secured with a rubber strap.
Red lifebuoy wall housing suitable for lifebuoys in all sizes.The housing meets the requirements of DIN ISO 18421:2016 "Ships and marine technology - Inland navigation vessels - Housing for lifebuoys".Closed shape with hinged lid. The box is made of glass fiber reinforced plastic using the hand lay-up method. A strong, spring-loaded lock made of stainless steel is used to prevent unintentional opening in the event of a storm. The hinges are made of plastic.There is enough space in the housing to store a 30 m throwing line in addition to the lifebuoy.The BGF "Rescue of drowning persons" sign is affixed to the center of the lid.Technical featuresDiameter: 880 mmDepth: 160 mmSuitable for wall, post or railing mountingSupplied without fixing material and without lifebuoy
The IKAROS line throwing device is used to make line connections in maritime emergencies and accidents as well as in overhead line and bridge construction. It is used between ships, from shore to ship or from ship to shore as well as for rescuing people.The robust device consists of a compact, waterproof plastic container with integrated handle and release mechanism, a rocket and 300 meters of high-strength line (4 mm polypropylene, tensile strength 2 kN).The pistol grip allows safe one-handed operation of the single-shot device (see explanatory video). In calm weather, the line can be shot up to 300 m away. The line floating head made of orange plastic ensures that the line is easy to find in the water.The rocket can be replaced (see explanatory video).The line launcher complies with the latest SOLAS 74/96 regulations and is approved worldwide (MED, MER, TC, USCG) (see "Downloads"). It can only be shipped as dangerous goods (at higher shipping costs).Technical featuresLength 340 mmDiameter 230 mmWeight 4,200 gRocket weight 650 gNEM 250 gIgnition by release leverRange 300 mLength of line 300 mLine diameter 4 mmLoad capacity of the line 2 kN
The FP throw line is a very practical accessory for attaching a safety line directly to the lifebuoy (with an internal diameter of 38 cm or 45 cm).The bottle-shaped, buoyant container is made of white plastic. It is clamped into the lifebuoy, which requires a certain amount of force. The buoyant braided line (diameter = 5 mm) made of orange PP, breaking load approx. 250 kg, is stowed in the container. It is connected to the ring with the eye at its end.The line is thus protected against weathering and damage. The lifebuoy is ready to be thrown at any time. In an emergency, the line container is removed from the ring, held and the ring thrown. The line runs out in an orderly fashion, making a person-overboard maneuver easier and safer.The throwing line in the container is also ideal for equipping lifebuoys in harbors, at locks or jetties.Available in two sizes.
8-strand line, braided from high-tensile multifiber polypropylene, very soft and grippy, waterproof and absolutely decay-proof.Recommended as life ring attachment line, rescue throw line, etc.
Ready-made 8 mm-lifeline in various lengths for attaching to the lifebuoy.The line complies with the regulations of the BG Verkehr (formerly See-Berufs-Genossenschaft SeeBG).3-carded, twisted floating line made of PP split, UV-stabilised.Colour: orange/black.
28 meter long, buoyant rescue throw line, stowed in a sealable, robust bag. The throwing weight attached to the bottom of the bag allows precise throwing.The yellow bag sits firmly in its stainless steel holder so that it does not get lost even when the yacht moves violently or waves come over it. The opening of the bag is located at the bottom of the holder to prevent water from running into the bag.The stainless steel holder is attached to the railing (tube diameter between 22 and 25 mm) with its clamp. Alternatively, it can be mounted on flat surfaces using suitable screws (not included).
The 28-metre-long, orange-coloured floating line is stowed with a casting weight and float in the likewise orange-coloured bag.This makes accurate casting possible even in headwinds.
Spool for attachment on existing bow or stern pulpit rails. The spool comes in parts for mounting on board; intended for 25 mm or 30 mm rails, simple to mount. No need for modifications to the rail. Material: white plastic, length: 300 mm, diameter: 180 mm. Capacity: approx. 80 m of 8 mm rescue line or approx. 30 m of 12 mm anchor line. (rope sold separately).
Roller for retrieving rescue lines or stern-anchor lines. Made entirely from seawater-proof stainless steel. Comes with a stainless steel (V4A) bracket with integrated hand crank, as well as three rings that allow a versatile and flexible attachment to stern pulpits with a diameter for 22-25 mm. Capacity: The drum diameter measures 180 mm, the width of the roller is 240 mm.T his conforms to a capacity of approx. 80 m of 8 mm rescue line and 30 m of 12 mm anchor line. Line sold separately.
Strong lifesaver pole with rescue sling (D=500mm) made from in plastic clad stainless steel wire at one end.Very light and floatable, despite its good stability.Anodized aluminium tube, with plastic handle.Tube diameter: D = 28 mm, wall thickness 1.5 mm.
