- Rigg & sail
- Rope & cordage
- Anchoring & mooring
- Hull & deck
- Cabin & comfort
- Paint & boatbuilding
- Electrics & engine
- Pumps & sanitation
- Safety & VHF radio
- Navigation & books
- Commercial shipping
Filter products now
from
9 €
to
49 €
from
100 mm
to
230 mm
from
40 mm
to
110 mm
from
5 mm
to
120 mm
Filter products now
from
9 €
to
49 €
from
100 mm
to
230 mm
from
40 mm
to
110 mm
from
5 mm
to
120 mm
Leak sealing
3 products
LEAK HERO mastic leak sealant YACHTCARE
€35.50 *
LEAK HERO is a mastic sealant for closing leaks in case of emergency.The wax-like material comes in a plastic container and is ready for use. It is easily applied to or stuffed into the leak directly from the container.Sticks strongly to most surfaces, also in wet surrounding and under water.Perfect material to stop water leaking into holes in the hull, plank seams, faulty through-hulls ...Should be carried in each emergency toolbox on board.Only for emergencies! Later the leak must be repaired professionally. - Closes a leakage in seconds - Cures leaks in case of emergency - Easy to use - ready for use - Sticks to wet surfaces.For each container sold 1 Euro is donated to German Lifeboat Association (DGzRS).Container with 625 ml.
Wood plugs
From
€9.90 *
One common reason for water intrusion onboard are broken hose connections at the sea cocks.Our soft-wood plugs can be easily tumbled in and stop the water. The set is made up of plugs in graded diameters. Lengths between 40 and 110 mm.




STA-PLUG Emergency plug
From
€23.90 *
The STA-PLUG is a timely solution for such emergencies as leaks and water breaches in a variety of boat types. The plug, from the manufacturer FORESPAR, is specially developed of soft flexible material in the shape of a cone, so that it can fit in the most unusual hull breaches after the motto "insert, push & twist". Whether it's a round hole due to a mechanical failure or a crack in the hull, the STA-PLUG fits the shape of the leak. Unlike classic wooden plugs, the soft cone can be squeezed together by hand or cut into a shape that fits the hole to stop the water flow.Dimensions: height 230 mm, largest diameter 120 mm.STA-PLUG does not guarantee to stop all leaks. It is meant to be one of the safety means on board besides others (like a bilge pump of sufficient dimension). Not to be used for leaks in the fuel system.



