Glossy, quick-drying, clear oil for wood and metal.Made using a special process from pure linseed oil and Chinese wood oil, contains no solvents.Good UV- and weather-resistance, durable and highly impact resistant.This varnish oil, used as ship varnish by the French navy, is intended for all woods and defatted metals.Coverage: approx. 20 m.sq/l.
Two component epoxy primer containing zinc dust (67%) with a high penetrating capability also on steel surfaces, whitch are only hand cleaned of rust or water-blasted.Resulting in a well adherent and robust cathodic corrosion protection layer. HANSAZINC tolerates some residual moisture (not wetness) and a thin film rust formation.Can be overcoated with 2-K paints, as well as with tar, vinyl and chlorinated rubber primer, but not with paints based on alkyd resin and colors containing zinc phosphate. Colour: dark grey.Yield: 8-11 sqm/l.
Based purely on natural oils, OWATROL oil, with its exceptional penetration capabilities, is the basic product for many applications.It is three times as wet as water, that is to say, it even creeps upwards. On rusty metal it creeps deep into the rust pores and displaces air and moisture (thus the real causes for rust) from inaccessible areas. After drying (24 hours at 20°C), it is on the one hand easier to remove the leaf rust, and on the other will the saturated final rust be sealed, conserved and preserved and can be painted over with paints that are turpentine soluble (not applicable for parts, that are constantly covered by water).Additionally OWATROL oil lends itself to be the perfect additive for one component paints. Used instead of turpentine as a thinner it improves the coating and flow properties substantially and provides an optimal adhesion without diluting the quality of the paint. On the contrary, by adding 10-15 % OWATROL oil, paints and varnishes will be even more closed porous and long-lasting in the surface.Also usable as a toxin-free wood impregnation. For small touch ups it is also available in a spray can.
Made from natural Lanolin, FLUID FILM seals all metal surfaces against water and air. This grease permeates rust and results in exceptionally long lasting corrosion protection. FLUID FILM contains no solvent, is environmentally friendly and easy to work with. Type LIQUID A: oil for rust removal and conservation of difficult to access areas. Available as a spray or in a bottle or canister (for dipping, spraying or painting).
Based purely on natural oils, OWATROL oil, with its exceptional penetration capabilities, is the basic product for many applications.It is three times as wet as water, that is to say, it even creeps upwards. On rusty metal it creeps deep into the rust pores and displaces air and moisture (thus the real causes for rust) from inaccessible areas. After drying (24 hours at 20°C), it is on the one hand easier to remove the leaf rust, and on the other will the saturated final rust be sealed, conserved and preserved and can be painted over with paints that are turpentine soluble (not applicable for parts, that are constantly covered by water).Additionally OWATROL oil lends itself to be the perfect additive for one component paints. Used instead of turpentine as a thinner it improves the coating and flow properties substantially and provides an optimal adhesion without diluting the quality of the paint. On the contrary, by adding 10-15 % OWATROL oil, paints and varnishes will be even more closed porous and long-lasting in the surface.Also usable as a toxin-free wood impregnation.Spray can for quick protection of small surfaces.
Penetrating oil for the preservation of steel used traditionally in the shipping industry. The firm drying liquid on a linseed stand-oil basis is especially suited for manually derusted steel surfaces.This aromatic free preservation will be used primarily where sandblasting or the use of power-tool cleaners is not possible, like for instance inboards, in the bilge or in the chain locker. Colour: brownish transparent.Also useful for impregnating raw wood.Yield: approx.17 m²/l.
EPIFANES EASY FLOW penetrating oil is a multi-purpose additive made of natural oils to improve the impregnating ability of one-component primers or undercoats.This product can be added to all conventional and semi-synthetic paints, even under difficult conditions, a favorable result is achieved. By adding 5-10% to the paint, visible brush strokes are avoided, thus creating a closed and smooth surface. Can also be used as an impregnating oil for wood and as a preservative oil for rusted steel surfaces freed from loose rust.This product can be reworked with conventional paints.
This world-renowned extra oil is made from the same formula since 1904. High-quality, alkyd, non-aging, non-hardening and non-resinous oil. Developed as a high quality gun oil, it cleans, protects and conserves every metal and plastic surface. It is applicable as rust penetrating oil, as well as for the lubrication of creaky hinges and the removal of tar spots. The special recipe for do-it-yourselfers, precision mechanics, in the industry and the crafts. For the application ranges from the car, motor cycle and push bike, in the household and garden, for the protection of woods and leather, for angler, hunter, marksmen to the water sports. BALLISTOL is made from natural plant extracts and is free of polluting components. Free of acids, resins, chlorinated carbon hydride, silicon and CFCs.
The BALLISTOL-TEFLON spray is suitable for clean dry lubrication of sensitive areas, free from oil, grease and silicone. The finest PTFE particles adhere even to microscopically small surface irregularities and thus ensure a reduction in static, sliding and rolling friction and protect against dirt and dust adhesion.Suitable for durable and long-lasting lubrication of rollers and bearings, slideways and guide rails, cable pulls and telescopic guides, gears and gear wheels as well as plastics of all kinds.Application: Shake well before use. Spray onto the surfaces and parts to be treated at a distance of 10-25 cm and leave to dry for a few minutes. A barely visible, dry film remains.Safety warning: Extremely flammable aerosol. Pressurized container: may burst if heated above 50°C. Causes severe eye irritation. Further information can be found below under "Downloads & Information".
OWATROL GELCOAT RESTORER, also known as POLYTROL, is a tried and tested color refresher for metals, plastics, paints and gelcoats.The product refreshes faded colors of plastic or gelcoat surfaces, regenerates faded surfaces of marble, tiles or slate and restores shine to dull surfaces without leaving a greasy or oily film.The product is acid- and silicone-free, extremely penetrating and penetrates deep and sealing into microporous surfaces.Also suitable for the care of brass, bronze and stainless steel fittings. Available as a spray (250ml) and as a can (500ml) for application with a brush.Coverage: 18m²
Very good lubricant, acid-free universal oil in a practical spray can for precise dispensing.Excellent screw loosener, displaces moisture, disintegrates rust and hinders new rust buildup. A good lubricant that does not attack first layers, such as metal, plastic and paint.
Permanently elastic, slow drying, single component thick coat paint, which can be applied on surfaces conserved with FLUID FILM Liquid A and prevents washing out.Surface and moisture tolerant anti corrosive coating for areas that are difficult to reach and hard to derust, as in the bilge.Colour: aluminium grey.
This world-renowned extra oil is made from the same formula since 1904. High-quality, alkyd, non-aging, non-hardening and non-resinous oil. Developed as a high quality gun oil, it cleans, protects and conserves every metal and plastic surface. It is applicable as rust penetrating oil, as well as for the lubrication of creaky hinges and the removal of tar spots. The special recipe for do-it-yourselfers, precision mechanics, in the industry and the crafts. For the application ranges from the car, motor cycle and push bike, in the household and garden, for the protection of woods and leather, for angler, hunter, marksmen to the water sports. BALLISTOL is made from natural plant extracts and is free of polluting components. Free of acids, resins, chlorinated carbon hydride, silicon and CFCs.