Go to homepage
€0.00*
Jobs
Catalogue
Quick order

SEAJET SAMURAI 031 Antifouling

2558-301 SEAJET 031 SAMURAI selbsterodierendes Antifouling rot
Seajet 031 Samurai Farbtabelle

SEAJET 031 SAMURAI is a slow-eroding antifouling with good all-round performance for waters with medium fouling conditions. It is suitable for all boatbuilding materials except aluminum and adheres to most hard and self-polishing antifoulings (not to Teflon and tin-containing antifoulings).

Technical data

  • Area of application: Waters with medium fouling
  • Boat type: motor and sailing boats up to 40 knots
  • Substrate: all materials except aluminum (with suitable primer)
  • Coverage: approx. 9 m²/l
  • Dilution: SEAJET THINNER A
  • Application method: Brush, roller, spraying
  • Drying times: Dust-dry: approx. 2 hours, recoatable: after approx. 6 hours
  • Service life (time between painting and wetting): min. 24 hours to 6 months

Information on Application can be found in the technical data sheet under "Downloads".

more information

from €38.95*

Content: 0.7519 (€51.80* / 1 Liter)

€38.95*

Content: 0.7519 Liter (€51.80* / 1 Liter)

Prices incl. VAT plus shipping costs

colour
contents
Ds
View article in the TOPLICHT catalogue

Description

SEAJET 031 SAMURAI is a slow-eroding antifouling with good all-round performance for waters with medium fouling conditions. It is suitable for all boatbuilding materials except aluminum and adheres to most hard and self-polishing antifoulings (not to Teflon and tin-containing antifoulings).

Technical data

  • Area of application: Waters with medium fouling
  • Boat type: motor and sailing boats up to 40 knots
  • Substrate: all materials except aluminum (with suitable primer)
  • Coverage: approx. 9 m²/l
  • Dilution: SEAJET THINNER A
  • Application method: Brush, roller, spraying
  • Drying times: Dust-dry: approx. 2 hours, recoatable: after approx. 6 hours
  • Service life (time between painting and wetting): min. 24 hours to 6 months

Information on Application can be found in the technical data sheet under "Downloads".

Downloads

Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts

Biocidal product: Important online purchase information

When purchasing biocidal antifoulings, private individuals with a German delivery address are required under the ChemBiozid-DV (Regulation (EU) No. 528/2012) to conduct a one-time telephone consultation before completing the purchase. This also applies to online purchases. Commercial customers and customers outside Germany are exempt from this obligation.

Here is how to proceed when purchasing a biocidal antifouling:

  • You must be logged in as a customer
  • Place the product in the shopping cart and proceed to checkout
  • After receiving the order, you will receive an information email with all relevant details
  • To conduct the consultation, please call Mon-Fri, between 9:00 am and 6:00 pm at the number +49 40 88901080. The conversation takes approx. 5 minutes.

Further information on biocidal products can be found here.

Legal information about the product
CLP Regulation
Symbols ghs02 ghs05 ghs07 ghs08 ghs09
Signalword Attention!
H phrases H226, H315, H317, H318, H362, H373, H410
BAuA-Registriernummer N-12986
P phrases P101, P102, P103, P210, P263, P280, P305+P351+P338, P310, P501
Classified according to Biocidal Regulation (Regulation 528/2012/EU): Use biocidal products with care. Always read label and product information before use.

SEAJET 117 Multipurpose Epoxy Primer
SEAJET 117 Multipurpose Epoxy Primer
The SEAJET 117 Multipurpose Epoxy Primer is a two-component primer for above and underwater use that is easy to apply and dries quickly. The ideal barrier layer to prevent water damage in underwater areas. Four coats provide good osmosis protection for GRP hulls and corrosion protection for steel or aluminum hulls. The primer can be painted over with two-component and one-component products.&nbsp

From €52.90 *
Details
SEAJET PROFESSIONAL 032 Antifouling
SEAJET PROFESSIONAL 032 Antifouling
SEAJET PROFESSIONAL 032 is an economical, self-polishing antifouling with copper compounds as the active ingredient. This antifouling was developed for small commercial and work boats and traditional sailing boats in salt, brackish and fresh water areas.Suitable for all boat building materials except aluminum. No sanding required before a subsequent coat.Current delivery information: The can size 3.5l will be discontinued, in future the product will be available in 5l cans.Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials except aluminumCoverage: approx. 8.7 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, spraying (professional use only)Drying times at 10°C: Dust-dry: approx. 2 hours, recoatable: after approx. 7 hoursTime between painting and launching at 10°C: min. 16 hours to 6 monthsFor information on processing, please refer to the technical data sheet under "Downloads".

From €129.00 *
Details
2069-475 EPIFANES Copper Cruise selbstpolierendes Antifouling hellblau 750ml
EPIFANES COPPER CRUISE Self Polishing Antifouling
EPIFANES COPPER CRUISE is a highly efficient antifouling containing copper and biocides with a self-polishing effect and excellent long-term fouling protection in fresh, brackish and salt water. Copper release technology combines the advantages of hard antifouling and self-polishing antifouling with significantly improved fouling protection. Compared to conventional copper-containing antifoulings, the active ingredients are optimized and released in much smaller quantities, which benefits the environment.Can be easily applied to most commercially available underwater primers, as well as hard and self-polishing antifoulings. Suitable for all sailing and motor boats with a maximum speed of 30 knots and for all boat building materials except aluminum. Not suitable for long-term moorings that are not moved or only moved a little throughout the season. This antifouling has a Dutch approval (approval no. 14301). Technical dataArea of application: Waters with medium to heavy foulingBoat type: motor and sailing boats up to 30 knotsSubstrate: all materials except aluminumCoverage: approx. 10 m²/lDilution: Not recommended, max. 2-3 % with EPIFANES Thinner D-100Application method: Brush, rollerDrying times at 20°C: Dust-dry: approx. 30 min., recoatable: after approx. 8 hoursService life (time between painting and wetting) at 20°C: min. 24 hours to 1 monthFor information on processing, please refer to the technical data sheet under "Downloads".&nbsp

From €57.91 *
Details
HEMPEL MILLE NCT Self Polishing Antifouling
HEMPEL MILLE NCT Self Polishing Antifouling
HEMPEL'S Mill NCT self-polishing premium antifouling has a highly effective fouling protection thanks to copper compounds and organic active ingredients.NCT technology (NewCopperTechnology) makes it possible to use the copper compounds in an even more controlled and continuous manner, making them even more economical and effective.The self-sanding effect of the antifouling always ensures a smooth, low-friction and bioactive surface and it does not need to be sanded before a subsequent coat.Suitable for all boat building materials (except aluminum) and for use in all waters.Technical DataArea of application: Waters with medium to heavy foulingBoat type: motor and sailing boatsSubstrate: all materials except aluminumCoverage: approx. 14 m²/lDilution: HEMPEL THINNER 808Application method: Brush, rollerDrying times at 10°C: Surface dry: 4 hours, recoatable: after approx. 8 hoursRefloating time (time between painting and launching) at 10°C: min. 24 hours to 9 months Further information on application can be found in the technical data sheet under “Downloads”.

From €38.90 *
Details

More Products from Category Selfpolishing antifouling

2069-475 EPIFANES Copper Cruise selbstpolierendes Antifouling hellblau 750ml
EPIFANES COPPER CRUISE Self Polishing Antifouling
EPIFANES COPPER CRUISE is a highly efficient antifouling containing copper and biocides with a self-polishing effect and excellent long-term fouling protection in fresh, brackish and salt water. Copper release technology combines the advantages of hard antifouling and self-polishing antifouling with significantly improved fouling protection. Compared to conventional copper-containing antifoulings, the active ingredients are optimized and released in much smaller quantities, which benefits the environment.Can be easily applied to most commercially available underwater primers, as well as hard and self-polishing antifoulings. Suitable for all sailing and motor boats with a maximum speed of 30 knots and for all boat building materials except aluminum. Not suitable for long-term moorings that are not moved or only moved a little throughout the season. This antifouling has a Dutch approval (approval no. 14301). Technical dataArea of application: Waters with medium to heavy foulingBoat type: motor and sailing boats up to 30 knotsSubstrate: all materials except aluminumCoverage: approx. 10 m²/lDilution: Not recommended, max. 2-3 % with EPIFANES Thinner D-100Application method: Brush, rollerDrying times at 20°C: Dust-dry: approx. 30 min., recoatable: after approx. 8 hoursService life (time between painting and wetting) at 20°C: min. 24 hours to 1 monthFor information on processing, please refer to the technical data sheet under "Downloads".&nbsp

From €57.91 *
Details
EPIFANES FOUL AWAY Biocide Free Bottom Paint
EPIFANES FOUL AWAY Biocide Free Bottom Paint
EPIFANES FOUL-AWAY is a self-polishing, biocide-free underwater ship paint. Suitable for freshwater, brackish water and occasional saltwater areas. Suitable for all boat building materials. Adheres to all hard antifoulings and self-polishing antifoulings. Three coats are recommended for the first application.Technical DataArea of use: Freshwater areas and temporary exposure in brackish and saltwaterBoat type: Sailing and motorboats Substrate(with suitable primer): Wood, steel, GRP, aluminium, existing hard or self-polishing antifoulingsPrimer: EPIFANES Interimcoat or EPIFANES Underwater PrimerCoverage: 10 m²/l at 50 µm dry film thicknessThinner: EPIFANES Thinner D-100Application method: Brush, roller, sprayDrying times: Dust dry after 1 hr at 20 °C; recoatable after 6 hrsRefloating time (time between painting and launching): 24 hrs to 6 monthsFurther information on processing can be found in the technical data sheet under "Downloads".

From €68.90 *
Details
HEMPEL ALU-PROP-NCT 750ml Antifouling
HEMPEL ALU-PROP-NCT 750ml Antifouling
High-performance, self-polishing antifouling. Excellent fouling protection thanks to HEMPEL's patented binder technology.Especially for aluminum boats, but can also be used for boats made of GRP, wood, steel and drives. Can be applied with a roller or brush. Technical dataArea of application: Waters with medium to heavy foulingBoat type: Motor and sailing boatsSubstrate (with suitable primer): all materials, including aluminumSuitable primer: HEMPEL'S Underwater Primer, HEMPEL'S Light PrimerCoverage: approx. 13 m²/lThinner: HEMPEL THINNER 808Application method: Brush, rollerDrying times at 10°C: Surface dry: 8 hours, recoatable: after approx. 7 hoursRefloating time (time between painting and launching) at 20°C: min. 24 hours to 9 months For information on application, please refer to the technical data sheet under “Downloads”. 

Content: 0.5 Liter (€0.00* / 1 Liter)

From €35.90 *
Details
2577*33 HEMPEL CLASSIC Antifouling
HEMPEL CLASSIC Antifouling
Robust and reliable, self-eroding antifouling with copper compounds as the active ingredient. No sanding required before subsequent coating. Suitable for all boat building materials except aluminum. Economical protection for the entire season in salt, brackish and fresh water areas with moderate temperatures.This antifouling has a Dutch approval (approval no. 15010).Technical dataArea of application: Waters with medium to heavy foulingBoat type: Sailing and motor boats with normal speedSubstrate: GRP, wood, plywood, steel (not suitable for aluminum)Coverage: approx. 13 m²/L (theoretically at 40 µm dry film thickness)Thinner: Hempel's Thinner 808 (max. 5 % for brush/roller application)Application method: Brush, rollerDrying times (at 10 °C): Hand dry after approx. 30 min., recoatable after approx. 8 hrs.Reflotating time (time between painting and launching): 24 hours - 1 monthFurther information on application can be found in the technical data sheet under “Downloads”.

From €23.90 *
Details
HEMPEL ECOPOWER Cruise biocide free
HEMPEL ECOPOWER Cruise biocide free
HEMPEL Ecopower Cruise is a biocide-free, self-polishing underwater hull paint for all materials, including aluminum. The innovative binder technology enables controlled self-renewal of the surface, seasonal fouling can be easily removed by mechanical cleaning.&nbsp

From €39.90 *
Details
HEMPEL ECOPOWER PROP Propeller-Spray
HEMPEL ECOPOWER PROP Propeller-Spray
HEMPEL'S ECOPOWER PROP Spray is a biocide-free spray paint for coating propellers, Z-drives and stern drives. Protects against fouling and facilitates cleaning. An advanced binder technology controls the self-renewing effect over the entire season.For use on uncoated surfaces, priming with HEMPEL'S Prop Primer is recommended.For existing, old or traditional antifouling, remove loose material and fouling beforehand. On surfaces with existing, old hard matrix or unknown antifouling, the surface should also be wet-sanded (180 grit). Then clean and dry the surface. If the condition of the previous antifouling layer is poor, seal with a layer of primer (e.g. HEMPELS Prop Primer).Technical dataArea of application: Waters with light to medium fouling conditionsBoat type: motor and sailing boats Surface: all materials, including aluminumSuitable primer: HEMPEL'S Underwater Primer or HEMPEL'S Prop PrimerCoverage: approx. 11 m²/lDilution: noneApplication method: SprayingDrying times at 10°C: Hand dry: 30 minutes, recoatable: n.a.Refloation time (time between painting and launching) at 10°C: min. 24 hours to 1 monthFurther application information can be found in the technical data sheet under “Downloads”.

Content: 0.5 Liter (€0.00* / 1 Liter)

From €28.91 *
Details
HEMPEL MILLE NCT Self Polishing Antifouling
HEMPEL MILLE NCT Self Polishing Antifouling
HEMPEL'S Mill NCT self-polishing premium antifouling has a highly effective fouling protection thanks to copper compounds and organic active ingredients.NCT technology (NewCopperTechnology) makes it possible to use the copper compounds in an even more controlled and continuous manner, making them even more economical and effective.The self-sanding effect of the antifouling always ensures a smooth, low-friction and bioactive surface and it does not need to be sanded before a subsequent coat.Suitable for all boat building materials (except aluminum) and for use in all waters.Technical DataArea of application: Waters with medium to heavy foulingBoat type: motor and sailing boatsSubstrate: all materials except aluminumCoverage: approx. 14 m²/lDilution: HEMPEL THINNER 808Application method: Brush, rollerDrying times at 10°C: Surface dry: 4 hours, recoatable: after approx. 8 hoursRefloating time (time between painting and launching) at 10°C: min. 24 hours to 9 months Further information on application can be found in the technical data sheet under “Downloads”.

From €38.90 *
Details
LeFANT NAUTICA HARD ECO biocide free antifouling
LeFANT NAUTICA HARD ECO biocide free antifouling
NAUTICA HARD ECO is a biocide-free underwater hull coating from the Swedish company LEFANT, which is suitable for sailing and motor boats of all speed ranges. It forms a hard, polishing surface that protects the boat from fouling and is easy to clean.NAUTICA HARD ECO is suitable for use on aluminium hulls and is compatible with most self-polishing and hard antifouling. Two coats are sufficient for seasonal protection, additional coats may be required in areas of higher friction and wear such as the rudder, stern and waterline.ATTENTION: The colour black is currently not available. Alternatively, choose a biocide-free hard antifouling (e.g. YACHTCARE PROTECTOR HARD )Technical DataArea of use: Suitable for waters with low to medium fouling pressureBoat type: For sailing and motorboats of all speed rangesSubstrate: Suitable for GRP, aluminium and most hard or semi-soft solvent-based antifoulingsPrimer: LEFANT EPOXY PRIMERCoverage: 13 m²/lThinner: NoneApplication method: Brush, rollerDrying times: recoatable after 12 hrs at 10 °CRefloating time (time between painting and launching): 24 hrs to 2 months at 20 °CFurther application information can be found in the technical data sheet under "Downloads".

From €59.00 *
Details
PPG SIGMA ECOFLEET 290S Self-Polishing Antifouling
PPG SIGMA ECOFLEET 290S Self-Polishing Antifouling
Self-polishing long-term antifouling from commercial shipping, suitable for use in offshore waters with high fouling pressure.  PPG SIGMA Ecofleet 290 S contains bioactive organic biocides and copper compounds, which are effectively released in a controlled manner through the continuous polishing rate. It therefore offers effective protection against fouling for 36 - 60 months (depending on driving style and routes). Complies with the IMO Antifouling Systems Convention.Can be applied to most hard and self-polishing antifoulings (not to Teflon-containing antifoulings).Technical DataArea of use: offshore, suitable for waters with heavy fouling pressureBoat type: For deep-sea vessels and commercial applicationsSubstrate: Wood, GRP, Steel, not AluminiumPrimer: PPG SIGMA Vikote 18 Coverage: 7.3 m²/l at 75 µmThinner: PPG Thinner 21-06Application method: brush, roller, airless spray (professional)Drying times: recoatable after 10 hrs at 10 °CRefloating time (time between painting and launching): 12 hrs (minimum) at 10 °CFurther information on application can be found in the technical data sheet under "Downloads".

From €147.00 *
Details
SEAJET 021 EKO Biocide-free Underwater Coating
SEAJET 021 EKO Biocide-free Underwater Coating
SEAJET 021 EKO is a biocide-free underwater coating that forms a hydrolysis-based, erodible layer that is constantly renewed, making it difficult for dirt and fouling to adhere. It is applied like a conventional antifouling, two coats last a season. Suitable for fresh and salt water areas with light to medium fouling pressure, regular cleaning of the surface is recommended during the year.SEAJET 021 EKO can be painted on primed wood, GRP, steel and aluminum. Suitable for boats with maximum speeds of up to 40 knots.Application: For a new coating of the underwater hull, 2 coats of SEAJET 117 Epoxy Primer are suitable for priming, for wooden hulls SEAJET 015 Underwater Primer. Then apply 2 coats of SEAJET 021 EKO. When applying to existing antifouling, compatibility should be checked beforehand, e.g. using the SEAJET compatibility table. Clean underwater coatings in good condition, apply 1 coat of SEAJET 015 Underwater Primer, then apply 2 coats of SEAJET 021 EKO.Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials (with suitable primer)Coverage: approx. 10 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, spraying (professional use only)Drying times at 10°C: Dust-dry: approx. 2 hours, recoatable: after approx. 7 hours.Time between painting and launching at 10°C: min. 12 hours.For information on processing, please refer to the technical data sheet under "Downloads".

Content: 0.7519 Liter (€0.00* / 1 Liter)

From €29.90 *
Details
SEAJET 033 SHOGUN antifouling
SEAJET 033 SHOGUN antifouling
Very effective, self-polishing antifouling, even in difficult fouling conditions.Suitable for all boat building materials except aluminum. Adheres to most hard and self-polishing antifoulings (not to those containing Teflon). Sanding before the next coat is not necessary. 2-3 coats last for 2 seasons.Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials except aluminumCoverage: approx. 8.8 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, spraying (professional use only)Drying times at 10°C: Dust-dry: approx. 2 hours, recoatable: after approx. 8 hoursTtime between painting and launching at 10°C: min. 18 hours to 6 monthsFor information on processing, please refer to the technical data sheet under "Downloads".

From €54.00 *
Details
SEAJET EMPEROR A 034 Self-polishing Antifouling Paint
SEAJET EMPEROR A 034 Self-polishing Antifouling Paint
SEAJET Emperor 034 A is a slowly eroding (=self-polishing) antifouling that contains no copper and is therefore also suitable for aluminum hulls. Its effective formulation makes it suitable for use in tropical saltwater areas with high fouling pressure.Technical dataArea of application: Waters with heavy foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials, including aluminum (with suitable primer)Coverage: approx. 10 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, sprayingDrying times: Dust-dry: approx. 3 hours, recoatable: after approx. 12 hoursTime between painting and wetting: min. 24 hours to 6 monthsFor further application information, please refer to the technical data sheet under "Downloads".

From €62.90 *
Details
SEAJET PROFESSIONAL 032 Antifouling
SEAJET PROFESSIONAL 032 Antifouling
SEAJET PROFESSIONAL 032 is an economical, self-polishing antifouling with copper compounds as the active ingredient. This antifouling was developed for small commercial and work boats and traditional sailing boats in salt, brackish and fresh water areas.Suitable for all boat building materials except aluminum. No sanding required before a subsequent coat.Current delivery information: The can size 3.5l will be discontinued, in future the product will be available in 5l cans.Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials except aluminumCoverage: approx. 8.7 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, spraying (professional use only)Drying times at 10°C: Dust-dry: approx. 2 hours, recoatable: after approx. 7 hoursTime between painting and launching at 10°C: min. 16 hours to 6 monthsFor information on processing, please refer to the technical data sheet under "Downloads".

From €129.00 *
Details
SEAJET SAMURAI 031 Antifouling
SEAJET SAMURAI 031 Antifouling
SEAJET 031 SAMURAI is a slow-eroding antifouling with good all-round performance for waters with medium fouling conditions. It is suitable for all boatbuilding materials except aluminum and adheres to most hard and self-polishing antifoulings (not to Teflon and tin-containing antifoulings).Technical dataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials except aluminum (with suitable primer)Coverage: approx. 9 m²/lDilution: SEAJET THINNER AApplication method: Brush, roller, sprayingDrying times: Dust-dry: approx. 2 hours, recoatable: after approx. 6 hoursService life (time between painting and wetting): min. 24 hours to 6 monthsInformation on Application can be found in the technical data sheet under "Downloads".

From €38.95 *
Details
YACHTCARE ANTIFOULING SP Self Polishing Antifouling
YACHTCARE ANTIFOULING SP Self Polishing Antifouling
Reliable, self-polishing antifouling with copper compounds and organic, bioactive substances for northern European coastal and inland waters. Thanks to the self-eroding surface, the bioactive substances can always develop their optimum effect over the entire service life of the coating and it does not need to be sanded before a new coat is applied. Cannot be applied to Teflon-based coatings.YACHTCARE ANTIFOULING SP is compatible with most antifouling systems and is suitable for all boat types and boat building materials except aluminum. Technical dataArea of application: Waters with medium to heavy foulingBoat type: Motor and sailing boats with medium speedSubstrate (with appropriate primer): all materials except aluminum, check existing coatings for compatibility before applicationCoverage: approx. 12.7 m²/lDilution: YACHTCARE ANTIFOULING THINNERApplication method: Brush, roller, spraying (professional use only)Drying times at 20°C: Recoatable: after approx. 6 hoursFurther information on processing can be found in the technical data sheet under “Downloads”. 

From €34.50 *
Details
YACHTCARE SAFEGUARD SP Bioicde Free Bottom Paint
YACHTCARE SAFEGUARD SP Bioicde Free Bottom Paint
YACHTCARE SAFEGUARD SP is a self-polishing, biocide-free underwater coating for sailing areas with light to medium fouling. It is suitable for sail and motor boats made of GRP, steel, wood or aluminum. LUBRICATOR FLUID, a special additive specially developed by YACHTCARE, makes it more difficult for fouling to adhere to the surface and facilitates cleaning after the boat has been craned. SAFEGUARD SP can be applied to most sanded hard and self-polishing antifoulings, an adhesion primer is not required. Not suitable for painting on thin film antifouling.&nbsp

From €34.90 *
Details

Last seen products