Go to homepage
€0.00*
Jobs
Catalogue
Quick order

SEA-LINE THIN FILM SILVER RACING Antifouling

Very smooth and extremely fast-drying thin-layer antifouling with PTFE anti-adhesion technology and copper oxides as biocidal active ingredients.
For medium fouling conditions in salt water, brackish water, fresh water and lakes. Can be applied to all epoxy underwater primers and is compatible with PTFE thin-film antifoulings such as VC 17m and Hempel Waterglide.
Before applying SEA-LINE THIN FILM to an already painted surface, please refer to the compatibility table. Do not use on aluminum or zinc surfaces. 

Technical Data

  • Area of application: Waters with medium fouling
  • Boat type: motor and sailing boats up to 40 knots
  • Substrate: all materials except aluminum
  • Coverage: approx. 11-12 m²/l
  • Dilution: Not recommended
  • Application method: Brush, roller, spraying (professional use only)
  • Drying times at 15°C: Dust-dry: approx. 30 minutes, recoating interval: min. 10 hours
  • Refloating (time between painting and launching) at 15°C: 3 hours to 6 months 

Further application information can be found in the technical data sheet under “Downloads”.

more information

from €44.90*

Content: 0.7519 (€59.72* / 1 Liter)

€44.90*

Content: 0.7519 Liter (€59.72* / 1 Liter)

Prices incl. VAT plus shipping costs

colour
contents
Ds
View article in the TOPLICHT catalogue

Description

Very smooth and extremely fast-drying thin-layer antifouling with PTFE anti-adhesion technology and copper oxides as biocidal active ingredients.
For medium fouling conditions in salt water, brackish water, fresh water and lakes. Can be applied to all epoxy underwater primers and is compatible with PTFE thin-film antifoulings such as VC 17m and Hempel Waterglide.
Before applying SEA-LINE THIN FILM to an already painted surface, please refer to the compatibility table. Do not use on aluminum or zinc surfaces. 

Technical Data

  • Area of application: Waters with medium fouling
  • Boat type: motor and sailing boats up to 40 knots
  • Substrate: all materials except aluminum
  • Coverage: approx. 11-12 m²/l
  • Dilution: Not recommended
  • Application method: Brush, roller, spraying (professional use only)
  • Drying times at 15°C: Dust-dry: approx. 30 minutes, recoating interval: min. 10 hours
  • Refloating (time between painting and launching) at 15°C: 3 hours to 6 months 

Further application information can be found in the technical data sheet under “Downloads”.

Downloads

Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts

Biocidal product: Important online purchase information

When purchasing biocidal antifoulings, private individuals with a German delivery address are required under the ChemBiozid-DV (Regulation (EU) No. 528/2012) to conduct a one-time telephone consultation before completing the purchase. This also applies to online purchases. Commercial customers and customers outside Germany are exempt from this obligation.

Here is how to proceed when purchasing a biocidal antifouling:

  • You must be logged in as a customer
  • Place the product in the shopping cart and proceed to checkout
  • After receiving the order, you will receive an information email with all relevant details
  • To conduct the consultation, please call Mon-Fri, between 9:00 am and 6:00 pm at the number +49 40 88901080. The conversation takes approx. 5 minutes.

Further information on biocidal products can be found here.

Legal information about the product
CLP Regulation
Symbols ghs02 ghs07 ghs08 ghs09
Signalword Attention!
H phrases H226, H315, H317, H319, H335, H373, H332, H335, H400, H411
BAuA-Registriernummer N-74280
P phrases P101, P102, P210, P264, P280, P305+P351+P338, P501
Classified according to Biocidal Regulation (Regulation 528/2012/EU): Use biocidal products with care. Always read label and product information before use.

More Products from Category Thinfilm antifouling

HEMPEL HEMPASPEED TF Thin-Film Bottom Coating
HEMPEL HEMPASPEED TF Thin-Film Bottom Coating
HEMPEL'S Hempaspeed TF is a hard, biocide-free thin-layer coating for all sports boats with GRP, steel or aluminum hulls, including regatta and trailer boats. Thanks to the special hydrogel technology, it forms an ultra-smooth surface that minimizes fouling and also reduces friction. Suitable for fresh, salt and brackish water as well as inland areas. Particularly recommended in areas where the use of biocides is prohibited or restricted (also in the Netherlands). Application on existing antifouling layer: It is possible to switch from a conventional antifouling to Hempaspeed TF. The old coating (if still intact) does not need to be removed. A coat of HEMPEL Conversion Primer should be applied as an adhesion primer, followed by two coats of Hempaspeed TF.Application as a new coating: When applying a new coating, the substrate must first be sealed with HEMPEL Light Primer before applying HEMPEL Conversion Primer and two coats of Hempaspeed TF.Technical DataArea of use: For fresh and saltwater with medium fouling; mechanical cleaning may be necessary in high fouling areasBoat type: For sport and racing boats, suitable for high-speed vesselsSubstrate: GRP, steel, aluminium; suitable over existing antifouling in good conditionPrimer: HEMPEL Conversion PrimerCoverage: 11 m²/lThinner: HEMPEL'S Thinner 808Application method: Brush, roller, airless spray (professional use)Drying times: Touch dry after 30 min at 10 °C; recoatable after 8 hrs at 10 °CRefloating time (time between painting and launching): 24 hrs to 3 monthsFurther information on processing can be found in the technical data sheet under “Downloads”.

From €44.90 *
Details
SEA-LINE THIN FILM SILVER RACING Antifouling
SEA-LINE THIN FILM SILVER RACING Antifouling
Very smooth and extremely fast-drying thin-layer antifouling with PTFE anti-adhesion technology and copper oxides as biocidal active ingredients.For medium fouling conditions in salt water, brackish water, fresh water and lakes. Can be applied to all epoxy underwater primers and is compatible with PTFE thin-film antifoulings such as VC 17m and Hempel Waterglide.Before applying SEA-LINE THIN FILM to an already painted surface, please refer to the compatibility table. Do not use on aluminum or zinc surfaces. Technical DataArea of application: Waters with medium foulingBoat type: motor and sailing boats up to 40 knotsSubstrate: all materials except aluminumCoverage: approx. 11-12 m²/lDilution: Not recommendedApplication method: Brush, roller, spraying (professional use only)Drying times at 15°C: Dust-dry: approx. 30 minutes, recoating interval: min. 10 hoursRefloating (time between painting and launching) at 15°C: 3 hours to 6 months Further application information can be found in the technical data sheet under “Downloads”.

From €44.90 *
Details

Last seen products