Fog horn TRUMP Mini
A piece of safety gear, because it gives a good signal without an external energy source.
Made from yellow plastic.
The tone comes from blowing in a hole on the side.
€15.90*
€15.90
Prices incl. VAT plus shipping costs
Description
The Mini-TRUMP generates a very loud signal! Up to 100 dB(A) are possible by simply blowing this horn.
A piece of safety gear, because it gives a good signal without an external energy source.
Made from yellow plastic.
The tone comes from blowing in a hole on the side.
Curved mouth-operated fog horn of high-quality design, made by the traditional german manufacturer MARTIN.Entirely made from polished brass.With brass reed that produces a very intense sound.Brass mouthpipe with plasic cover (may be removed).Tuned to C'.
Polished brass foghorn. Handy, curved design with a brass chain.
Functional plastic fog horn. Light and corrosion-proof.Body and reed of red plastic.
The Mini-TRUMP generates a very loud signal! Up to 100 dB(A) are possible by simply blowing this horn.A piece of safety gear, because it gives a good signal without an external energy source.Made from yellow plastic.The tone comes from blowing in a hole on the side.
This item is unfortunately no longer available.Reproduction of the Swedish "TYFONS" as used on board tall ships in the past.With a beautifully crafted heavy brass cylinder and funnel on a varnished mahogany base plate, this horn is not only a safety-relevant (reserve) piece of equipment for larger ships, but also a piece of maritime jewelry.The loud and deep signal tone is produced when pumping up and down, so a continuous tone can also be produced by pumping faster. The brass tuning diaphragm is adjustable.
The pump foghorn used in commercial shipping produces a deep, penetrating continuous tone.It is made entirely of brass by Den Haan Rotterdam (DHR). The pump piston has a leather membrane.The bell is firmly soldered to the pump piston.With leather carrying strap.MeasurementsTotal height: 550 mmWeight: 1.5 kgPump cylinder: 100 mm diameter, 500 mm height
Straight plate-brass fog horn, cleanly grooved. Polished finish.Mouth piece with solid metal reed.
Handy air horn, works WITHOUT GAS. Air pressure is generated manually, for maximum economy and sound performance. Pump housing and trumpet made of plastik.
Plastic compressed-air signal horn with a stainless-steel diaphragm, pressurized-gas operated.Very loud, piercing sound with a range of approximately 1,500 meters.Comes complete with a compressed gas cylinder (flammable propane-butane mixture) with a capacity of 380 ml.The 380-ml pressurized gas cylinder is also available as a replacement part.UsageAttach the signal horn by screwing it onto the gas cartridgeTo activate, press the signal horn downwardThe signal horn must only be used in an upright positionDo not store the pressurized gas cylinder in direct sunlight, and do not expose it to temperatures above 40 °C
200-ml pressurized gas cylinder as a replacement for the MARCO TA1-H compressed-air handheld signal horn, which the manufacturer no longer offers.The replacement cylinder is filled with non-flammable propellant (tetrafluoropropene HFO-1234ze, compliant with European Directive No. 517/2014). It is sufficient for approximately 200 signals, each lasting 2 seconds.
Plastic signal horn with stainless steel membran, pressurised gas operated. Very loud penetrating sound approx. 122 dB(A), frequency 400 Hz.Supplied complete with compressed gas cylinder (750 ml capacity) in a practical storage bag. Non-flammable propellant gas tetrafluoropropene HFO-1234ze, complies with European Directive No.517 / 2014).Sufficient for approx. 750 signals of 2 seconds each.The 200ml gas cylinder (article no. 3403-100) can be used as a replacement cylinder. You will find these further down on this page under "Accessories".
Mouthpiece for setting up an "analog" intercom system, as was traditionally used on commercial vessels.Two mouthpieces are connected to a suitable hose or pipe.The classically shaped mouthpiece is made of polished brass and the matching pipe is secured with a brass chain.The pipe socket has a diameter of 30 mm and a 1" Withworth internal pipe thread.
Spares reed for fog horn MARTIN (Art-Nr. 3417-410): - spare brass reed (tuned fis'), screws into the horn, - spare brass mouthpipe.
Straight mouth-operated fog horn, entirely made from brass.Pr oduced by the german manufacturer MARTIN, of high-quality design.Brass mouthpiece and reed that can be unscrewed, re-tuned and replaced, if necessary.Very loud and intense sound.Replacement brass reed and mouthpipe are available and make this horn a fine example for sustainable, long lasting quality products.Tuned to F sharp'.
