Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Jerrycan lift pump

€10.90*

€10.90*

Prices incl. VAT plus shipping costs

Passage diameter (inches)
pipe length (mm)
output
Stk

Simple jerrycan lift pump – industrial type. Operates on the siphon principle and allows easy, clean transfer of liquids from jerrycans or other containers. By briefly priming the liquid flow is initiated; the hydrostatic height difference then maintains the flow automatically. Hand bulb with vent screw to regulate the liquid flow. The suction tube is 40 cm long and has an internal diameter of 1/2 inches.

· Flow rate: approx. 6.7 l/min
· Hose diameter: ½″ (≈ 13 mm)
· Suction tube: length approx. 40 cm
· Total length: approx. 514 mm
· Weight: approx. 50 g
· Material: polyethylene
· Colour: red bulb with transparent suction tube
· Application: for petrol, diesel, kerosene (paraffin), water and comparable liquids

more information
Show article

Simple jerrycan lift pump – industrial type. Operates on the siphon principle and allows easy, clean transfer of liquids from jerrycans or other containers. By briefly priming the liquid flow is initiated; the hydrostatic height difference then maintains the flow automatically. Hand bulb with vent screw to regulate the liquid flow. The suction tube is 40 cm long and has an internal diameter of 1/2 inches.

· Flow rate: approx. 6.7 l/min
· Hose diameter: ½″ (≈ 13 mm)
· Suction tube: length approx. 40 cm
· Total length: approx. 514 mm
· Weight: approx. 50 g
· Material: polyethylene
· Colour: red bulb with transparent suction tube
· Application: for petrol, diesel, kerosene (paraffin), water and comparable liquids

Description

Simple jerrycan lift pump – industrial type. Operates on the siphon principle and allows easy, clean transfer of liquids from jerrycans or other containers. By briefly priming the liquid flow is initiated; the hydrostatic height difference then maintains the flow automatically. Hand bulb with vent screw to regulate the liquid flow. The suction tube is 40 cm long and has an internal diameter of 1/2 inches.

· Flow rate: approx. 6.7 l/min
· Hose diameter: ½″ (≈ 13 mm)
· Suction tube: length approx. 40 cm
· Total length: approx. 514 mm
· Weight: approx. 50 g
· Material: polyethylene
· Colour: red bulb with transparent suction tube
· Application: for petrol, diesel, kerosene (paraffin), water and comparable liquids

Questions about the product?

Similar products

Transfer pump
Transfer pump
A patented intake valve eases the filling of various liquids, for example water, diesel, or gas.The liquid must only be higher than the container being filled, no more sucking with the mouth necessary.Comes with a 2m hose.

From €19.94 *
Details
All-purpose manual pump REILANG RHP500UV
All-purpose manual pump REILANG RHP500UV
The all-purpose manual pump RHP500UV serves for emptying or filling-up with fluids, which do not affect aluminium or brass. Features: universally deployable, casing made of aluminium, smooth-running due to a special slip ring, displaced volume 555 ml, weight 576 g. A nozzle tube with lenght 200 mm and an inside diameter of 10 mm is part of the shipment.

€64.90 *
Details
Funnel with strainer
Funnel with strainer
High-quality plastic funnel with strainer.Particularly suited for filling fuel into a can, when the strainer stops unwanted contamination with dirt.Colour white.

€13.49 *
Details
Oil absorbent cloth ÖCUSORB
Oil absorbent cloth ÖCUSORB
These OECUSORB oil-absorbant cloths are made from polypropylene and can absorb up to 25 times their weight in oil and other organic liquids.Simple to handle, hydrophobic, floating, reusable and easy to dispose of. The cloths are ideal for soaking up oil from the bilges of small boats, but are also useful for many other tasks: protection of areas where oil or fuel could spill (for example, deck fills when fueling), water-polution control, cleaning motors and winches, etc.Comes as a cloth, dimensions 33 x 33 cm, weight approx. 30 g.

€1.80 *
Details

More products from the category Transfer pumps

Bronze Gear transfer pump MARCO UP3
Bronze Gear transfer pump MARCO UP3
Self-priming small feed pump with bronze gears, particularly suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Nickel-plated brass pump housing, stainless steel shaft. Suction height 1.5 m. Self-priming (not dry self-priming).Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3-S with integrated on/off switch or as transportable feed pump set MARCO UP3-CK. See under similar products.

From €164.90 *
Details
Bronze Gear transfer pump MARCO UP3-S with switch
Bronze Gear transfer pump MARCO UP3-S with switch
Small MARCO UP3-S feed pump with bronze gears and integrated, practical on/off switch. Suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Delivery rate 15 litres per minute.Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3 without switch or as transportable feed pump set MARCO UP3-CK. See under similar products.

From €185.00 *
Details
Jerrycan lift pump
Jerrycan lift pump
Simple jerrycan lift pump – industrial type. Operates on the siphon principle and allows easy, clean transfer of liquids from jerrycans or other containers. By briefly priming the liquid flow is initiated; the hydrostatic height difference then maintains the flow automatically. Hand bulb with vent screw to regulate the liquid flow. The suction tube is 40 cm long and has an internal diameter of 1/2 inches.· Flow rate: approx. 6.7 l/min· Hose diameter: ½″ (≈ 13 mm)· Suction tube: length approx. 40 cm· Total length: approx. 514 mm· Weight: approx. 50 g· Material: polyethylene· Colour: red bulb with transparent suction tube· Application: for petrol, diesel, kerosene (paraffin), water and comparable liquids

€10.90 *
Details
Transfer pump
Transfer pump
A patented intake valve eases the filling of various liquids, for example water, diesel, or gas.The liquid must only be higher than the container being filled, no more sucking with the mouth necessary.Comes with a 2m hose.

From €19.94 *
Details
Transfer pump set MARCO CK
Transfer pump set MARCO CK
Portable transfer pump set type MARCO CK for mobile use.Complete with metal carrying case with plastic handle.Integrated "on-off" switch, cables with fuse and battery clamps.Self-priming electric pump type MARCO UP3, with bronze gears for transfer of various liquids.Main applications: transfer of diesel fuel (day tank), water, antifreeze and oils of low viscosity.Ports with brass connection for 3/8" inner tubing, with hose connectors for 14mm hose. Self priming 1,5 m.Comes with transparent plastic filter.

From €199.90 *
Details

Zuletzt angesehene Artikel