Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Bronze Gear transfer pump MARCO UP3-S with switch

4791*03 Zahnradpumpe m. Schalter MARCO UP3-S für Diesel etc.
4791*03 Zahnradpumpe m. Schalter MARCO UP3-S für Diesel etc.

Small MARCO UP3-S feed pump with bronze gears and integrated, practical on/off switch. Suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Delivery rate 15 litres per minute.

Connections 3/8" internal thread, with hose nozzles for 14 mm hose.
Comes with strainer.

Also available as model MARCO UP3 without switch or as transportable feed pump set MARCO UP3-CK. See under similar products.


more information

from €185.00*

€185.00*

Prices incl. VAT plus shipping costs

model
voltage (V)
pressure (bar)
output
L x B x H (mm)
Stk
View article in the TOPLICHT catalogue

Description

Small MARCO UP3-S feed pump with bronze gears and integrated, practical on/off switch. Suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Delivery rate 15 litres per minute.

Connections 3/8" internal thread, with hose nozzles for 14 mm hose.
Comes with strainer.

Also available as model MARCO UP3 without switch or as transportable feed pump set MARCO UP3-CK. See under similar products.


Downloads

Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts
Hose clamp stainless steel
Hose clamp stainless steel
Solid stainless steel design - all pieces completely stainless.With hexagonal bolts for high torque, high tear resistance and elasticity.

From €1.50 *
Details
Fuel hose clamp stainless steel
Fuel hose clamp stainless steel
Special hose clamps for fuel hoses.Made entirely of A2-stainless steel.10 pieces per pack.

From €18.69 *
Details
Fuel hose
Fuel hose
Nitrile rubber fuel hose for use with diesel or petrol, with outer textile covering.Applicable as pressure or suction hose.

From €7.90 *
Details
PVC hose (food safe)
PVC hose (food safe)
Transparent PVC hose with cross-fabric insert of polyester yarn.Food safe, resistant to chemicals and oil.Temperature resistant from -5°C to +60°C.Also intended for pressurized water systems.

From €2.50 *
Details
Bronze Gear transfer pump MARCO UP3
Bronze Gear transfer pump MARCO UP3
Self-priming small feed pump with bronze gears, particularly suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Nickel-plated brass pump housing, stainless steel shaft. Suction height 1.5 m. Self-priming (not dry self-priming).Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3-S with integrated on/off switch or as transportable feed pump set MARCO UP3-CK. See under similar products.

From €164.90 *
Details
Transfer pump set MARCO CK
Transfer pump set MARCO CK
Portable transfer pump set type MARCO CK for mobile use.Complete with metal carrying case with plastic handle.Integrated "on-off" switch, cables with fuse and battery clamps.Self-priming electric pump type MARCO UP3, with bronze gears for transfer of various liquids.Main applications: transfer of diesel fuel (day tank), water, antifreeze and oils of low viscosity.Ports with brass connection for 3/8" inner tubing, with hose connectors for 14mm hose. Self priming 1,5 m.Comes with transparent plastic filter.

From €199.90 *
Details
Transfer pump
Transfer pump
A patented intake valve eases the filling of various liquids, for example water, diesel, or gas.The liquid must only be higher than the container being filled, no more sucking with the mouth necessary.Comes with a 2m hose.

From €19.94 *
Details
All-purpose manual pump REILANG RHP500UV
All-purpose manual pump REILANG RHP500UV
The all-purpose manual pump RHP500UV serves for emptying or filling-up with fluids, which do not affect aluminium or brass. Features: universally deployable, casing made of aluminium, smooth-running due to a special slip ring, displaced volume 555 ml, weight 576 g. A nozzle tube with lenght 200 mm and an inside diameter of 10 mm is part of the shipment.

€64.90 *
Details
Semi-rotary pump from cast iron
Semi-rotary pump from cast iron
Extremely robust hand pump for pumping almost all liquids, even hot ones. The pump is well suited as an oil change and diesel pump. The pumps are not self-priming!The housing is completely made of cast iron and then varnished. The wings and valves are made of brass. The handle of the pump is made of wood (in the case of article 4626-010 the handle is made of varnished cast iron).On both sides there is an inch BSP female thread.Available with pump body made entirely of bronze on request.

From €119.00 *
Details
Shut-off valve GUIDI
Shut-off valve GUIDI
Made from seawater-proof bronze (Rg 7). Essential for the control of, for example, fuel or tank connections.Red-painted aluminum handle.A switch cable can be attached at the handle bore hole - with firmly ancored valve - in order to open or shut the flow rate.The angle of the lever is approx. 30°.

From €45.51 *
Details

More Products from Category Transfer pumps

Bronze Gear transfer pump MARCO UP3
Bronze Gear transfer pump MARCO UP3
Self-priming small feed pump with bronze gears, particularly suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Nickel-plated brass pump housing, stainless steel shaft. Suction height 1.5 m. Self-priming (not dry self-priming).Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3-S with integrated on/off switch or as transportable feed pump set MARCO UP3-CK. See under similar products.

From €164.90 *
Details
Bronze Gear transfer pump MARCO UP3-S with switch
Bronze Gear transfer pump MARCO UP3-S with switch
Small MARCO UP3-S feed pump with bronze gears and integrated, practical on/off switch. Suitable for pumping diesel (day tank), low-viscosity oils, petroleum and antifreeze. Delivery rate 15 litres per minute.Connections 3/8" internal thread, with hose nozzles for 14 mm hose.Comes with strainer.Also available as model MARCO UP3 without switch or as transportable feed pump set MARCO UP3-CK. See under similar products.

From €185.00 *
Details
Jerrycan lift pump
Jerrycan lift pump
Simple jerrycan lift pump – industrial type. Operates on the siphon principle and allows easy, clean transfer of liquids from jerrycans or other containers. By briefly priming the liquid flow is initiated; the hydrostatic height difference then maintains the flow automatically. Hand bulb with vent screw to regulate the liquid flow. The suction tube is 40 cm long and has an internal diameter of 1/2 inches.· Flow rate: approx. 6.7 l/min· Hose diameter: ½″ (≈ 13 mm)· Suction tube: length approx. 40 cm· Total length: approx. 514 mm· Weight: approx. 50 g· Material: polyethylene· Colour: red bulb with transparent suction tube· Application: for petrol, diesel, kerosene (paraffin), water and comparable liquids

€10.90 *
Details
Transfer pump
Transfer pump
A patented intake valve eases the filling of various liquids, for example water, diesel, or gas.The liquid must only be higher than the container being filled, no more sucking with the mouth necessary.Comes with a 2m hose.

From €19.94 *
Details
Transfer pump set MARCO CK
Transfer pump set MARCO CK
Portable transfer pump set type MARCO CK for mobile use.Complete with metal carrying case with plastic handle.Integrated "on-off" switch, cables with fuse and battery clamps.Self-priming electric pump type MARCO UP3, with bronze gears for transfer of various liquids.Main applications: transfer of diesel fuel (day tank), water, antifreeze and oils of low viscosity.Ports with brass connection for 3/8" inner tubing, with hose connectors for 14mm hose. Self priming 1,5 m.Comes with transparent plastic filter.

From €199.90 *
Details

Last seen products