Go to homepage
€0.00*
Jobs
Catalogue
Quick order
2520-007 YACHTCARE ANTIFOULING STRIPPER 2,5l

YACHTCARE ANTIFOULING STRIPPER is a gel-like, highly effective remover for antifouling coatings. The product loosens existing antifouling layers in a short time, allowing them to be easily removed mechanically, without sanding. Due to its gel-like consistency, the material also adheres to vertical surfaces. Gelcoat and intact 2-component primer layers beneath the antifouling are not attacked.

Application:
Apply ANTIFOULING STRIPPER evenly to the surface using a wide brush. Then leave it to act for about 60 minutes up to a maximum of 2 hours. Scrape off the loosened paint layers with a spatula. Repeat the process if necessary until all coatings are removed. Collect paint residues and dispose of them properly. Protect adjacent surfaces.

For safety, it is recommended to wear protective gloves and goggles during application. Then thoroughly clean the surface with fresh water and allow it to dry completely. 

Technical Data

  • Application area: Removal of antifouling coatings
  • Substrate: GRP, wood, steel, aluminum
  • Coverage: approx. 200–600 ml/m² (depending on the thickness of the old coating)
  • Application and surface temperature: +5 °C to max. +25 °C.
  • Thinning: none
  • Application method: brush, mechanical removal with spatula 

For more information on application, see the Technical Data Sheet under 'Downloads'.

more information

€64.90*

Content: 0.7519 (€86.31* / 1 Liter)

€64.90*

Content: 0.7519 Liter (€86.31* / 1 Liter)

Prices incl. VAT plus shipping costs

Ds

Description

YACHTCARE ANTIFOULING STRIPPER is a gel-like, highly effective remover for antifouling coatings. The product loosens existing antifouling layers in a short time, allowing them to be easily removed mechanically, without sanding. Due to its gel-like consistency, the material also adheres to vertical surfaces. Gelcoat and intact 2-component primer layers beneath the antifouling are not attacked.

Application:
Apply ANTIFOULING STRIPPER evenly to the surface using a wide brush. Then leave it to act for about 60 minutes up to a maximum of 2 hours. Scrape off the loosened paint layers with a spatula. Repeat the process if necessary until all coatings are removed. Collect paint residues and dispose of them properly. Protect adjacent surfaces.

For safety, it is recommended to wear protective gloves and goggles during application. Then thoroughly clean the surface with fresh water and allow it to dry completely. 

Technical Data

  • Application area: Removal of antifouling coatings
  • Substrate: GRP, wood, steel, aluminum
  • Coverage: approx. 200–600 ml/m² (depending on the thickness of the old coating)
  • Application and surface temperature: +5 °C to max. +25 °C.
  • Thinning: none
  • Application method: brush, mechanical removal with spatula 

For more information on application, see the Technical Data Sheet under 'Downloads'.

Downloads

Questions about the product?
Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts
2520*11 YACHTCARE SP Antifouling selbstpolierend
YACHTCARE ANTIFOULING SP Self Polishing Antifouling
Reliable, self-polishing antifouling with copper compounds and organic, bioactive substances for northern European coastal and inland waters. Thanks to the self-eroding surface, the bioactive substances can always develop their optimum effect over the entire service life of the coating and it does not need to be sanded before a new coat is applied. Cannot be applied to Teflon-based coatings.YACHTCARE ANTIFOULING SP is compatible with most antifouling systems and is suitable for all boat types and boat building materials except aluminum. Technical dataArea of application: Waters with medium to heavy foulingBoat type: Motor and sailing boats with medium speedSubstrate (with appropriate primer): all materials except aluminum, check existing coatings for compatibility before applicationCoverage: approx. 12.7 m²/lDilution: YACHTCARE ANTIFOULING THINNERApplication method: Brush, roller, spraying (professional use only)Drying times at 20°C: Recoatable: after approx. 6 hoursFurther information on processing can be found in the technical data sheet under “Downloads”. 

From €35.50 *
Details
2520-801 YACHTCARE ANTIFOULING ACTION Hartantifouling 750ml und 2,5l
YACHTCARE ANTIFOULING ACTION Hard Antifouling
YACHTCARE ANTIFOULING ACTION is an economical and effective hard antifouling with copper compounds as the active ingredient and an insoluble binder. This provides very good fouling protection especially for fast motorboats, trailer boats, and boats that dry out in tidal flats. Developed for Northern European inland and coastal waters. It can be used on all primed surfaces and boat materials except aluminum.Technical DataApplication area: For all Northern European inland and coastal waters with moderate fouling pressure; not recommended for warm watersBoat type: For sailing and motorboats, especially suitable for fast motorboats, trailer boats, and boats in dry marinasSubstrate: GRP, steel, wood; not on aluminumPrimer: YACHTCARE Epoxy Primer (Art.No. 2520-014) or YACHTCARE Antifouling Primer (Art.No. 2520-012)Coverage: approx. 13 m²/lThinner: YACHTCARE ANTIFOULING THINNER (Art.No. 2520-009), (5–10% optional)Application method: Brush, mohair rollerDrying times: Recoatable after 6 hrs at 20 °CPot life (time between painting and launching): 24 hrs to 6 months

From €37.90 *
Details
2059*19 EPIFANES Abbeizmittel
EPIFANES Paint Remover
Effective and odorless paint stripper for almost all 1- and 2-component paints and varnishes, as well as for antifoulings and epoxy primers on all common boatbuilding materials.Non-evaporating, PH neutral, biodegradable, contains no alkalis, acids or biocides and is harmless for the following coating. Can be used below freezing point.Application: Stir well before use. Apply a thick coat with a soft, long-haired brush. After use, remove all residual material before applying a new coat. Avoid repeated overbrushing. Reaction time may take from 30 minutes to 24 hours, depending on the layer of paint to be removed. Make a small test trial on the surface to check the compatibility. The best way to remove treated layers is with a knife or spatula. Other paint and paint stripper residues can be washed from the surface with water.

€45.20 *
Details

More Products from Category Paint remover

2059*19 EPIFANES Abbeizmittel
EPIFANES Paint Remover
Effective and odorless paint stripper for almost all 1- and 2-component paints and varnishes, as well as for antifoulings and epoxy primers on all common boatbuilding materials.Non-evaporating, PH neutral, biodegradable, contains no alkalis, acids or biocides and is harmless for the following coating. Can be used below freezing point.Application: Stir well before use. Apply a thick coat with a soft, long-haired brush. After use, remove all residual material before applying a new coat. Avoid repeated overbrushing. Reaction time may take from 30 minutes to 24 hours, depending on the layer of paint to be removed. Make a small test trial on the surface to check the compatibility. The best way to remove treated layers is with a knife or spatula. Other paint and paint stripper residues can be washed from the surface with water.

€45.20 *
Details
2520-007 YACHTCARE ANTIFOULING STRIPPER 2,5l
Powerful antifouling remover with gel consistency that quickly dissolves old coatings for easy scraping. Available at TOPLICHT.
YACHTCARE ANTIFOULING STRIPPER is a gel-like, highly effective remover for antifouling coatings. The product loosens existing antifouling layers in a short time, allowing them to be easily removed mechanically, without sanding. Due to its gel-like consistency, the material also adheres to vertical surfaces. Gelcoat and intact 2-component primer layers beneath the antifouling are not attacked.Application:Apply ANTIFOULING STRIPPER evenly to the surface using a wide brush. Then leave it to act for about 60 minutes up to a maximum of 2 hours. Scrape off the loosened paint layers with a spatula. Repeat the process if necessary until all coatings are removed. Collect paint residues and dispose of them properly. Protect adjacent surfaces.For safety, it is recommended to wear protective gloves and goggles during application. Then thoroughly clean the surface with fresh water and allow it to dry completely. Technical DataApplication area: Removal of antifouling coatingsSubstrate: GRP, wood, steel, aluminumCoverage: approx. 200–600 ml/m² (depending on the thickness of the old coating)Application and surface temperature: +5 °C to max. +25 °C.Thinning: noneApplication method: brush, mechanical removal with spatula For more information on application, see the Technical Data Sheet under 'Downloads'.

€64.90 *
Details

Last seen products