To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

1665-624 Bronze Relingsstütze DAVEY alte Form

1665-624 Bronze Relingsstütze DAVEY alte Form

Stainless steel rail gate stanchion

This railing gate stanchion is a quality product from Germany, made by NIRO PETERSEN.
Made from stainless steel V4A 1.4404.
Pipe diameter 25mm x 1.5mm, cleanly shaped and polished.
Tested by Germanischer Lloyd; approved for all regions and ships over 8 m long.

For a complete railing gate two of these stanchions are needed.

€233.00*

€233.00*

Prices incl. VAT plus shipping costs

model

NP-Nr. 217

L1 (mm)

740

L2 (mm)

440

Stk

View article in the TOPLICHT catalogue

Art. No.	model	L1 (mm)	L2 (mm)	Price (unit)	Delivery time	Note list	Buy

Description

This railing gate stanchion is a quality product from Germany, made by NIRO PETERSEN.
Made from stainless steel V4A 1.4404.
Pipe diameter 25mm x 1.5mm, cleanly shaped and polished.
Tested by Germanischer Lloyd; approved for all regions and ships over 8 m long.

For a complete railing gate two of these stanchions are needed.

Questions about the product?

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

More Products from Category Stanchions & hinges

Brass flush stanchion socket

Brass flush stanchion socket

Foot fitting to be set into the deck or shelf.Made from solid brass, polished or chromed finish.

From €21.21 *

Bronze flush stanchion socket DAVEY

Bronze flush stanchion socket DAVEY

Strong cast-bronze flush stanchion base, matches our classic DAVEY stanchions.Shiny polished by hand.For fitting through the deck or in the top rail.A countersunk stainless fixing screw holds the stanchion in place.

€80.00 *

Bronze rail hinge DAVEY 8956

Bronze rail hinge DAVEY 8956

Heavy hinges and latches made from hand-polished cast bronze by DAVEY. The open design, as well as the screw attachment (visible heads) allow good conformation to various wood depths. The three-piece fitting set is made up of the actual hinge and the two-piece latch fitting. Comes in two sizes.

From €468.00 *

Bronze stanchion base

Bronze stanchion base

Strong bronze stanchion socket with a lip and a compact five-cornered ground plate, as well as a support on the side.Two designs: 90° or with 6° angle of inclination for slanted decks.Surface: tumbled with matt finish.

From €186.00 *

Bronze stanchion DAVEY

Bronze stanchion DAVEY

Classic, elegantly shaped stanchions, built in an English foundry from historic cast models. Sand-cast from solid bronze and hand polished and drilled.Loose for plugging in, with cotter-pin hole.Core holes of 8 mm exist for the lifelines to run through. They can be drilled out to a maximum of 15 mm. The stanchions are tapered.Because of the large amount of hand work in the manufacture, small deviations in dimensions are unavoidable.

From €339.00 *

Bronze stanchion DAVEY previous design

Bronze stanchion DAVEY previous design

Classic, beautifully shaped stanchions, loose for plugging in, with cotter pin hole. Made from solid bronze based on historical cast models by the traditional British manufacturer DAVEY.Core holes of 8 mm exist for the lifelines to run through. They can be drilled out to a maximum of 15 mm.Because of the large amount of hand work in the manufacture, small deviations in dimensions are unavoidable. Note: Different old shape of the Davey railing support DL1665 (top light 1665-625). The difference is in the lower diameter, here D=25mm tapered. Therefore does not fit the DAVEY stanchion sockets from our range.

€289.00 *

Bronze stanchion socket DAVEY

Bronze stanchion socket DAVEY

Robust stanchion socket made from bronze casting, high gloss polished by hand. compatible with our classic DAVEY stanchions (with a diameter of 27,5 mm). Weight: 1,7 kg

€203.00 *

Bronze stanchion socket with eye DAVEY

Bronze stanchion socket with eye DAVEY

Strong cast-bronze foot fitting, shiny polished by hand.Matches our classic DAVEY stanchions.With fixed eye for attaching fenders.

€140.00 *

Bronze stanchion with round base DAVEY

Bronze stanchion with round base DAVEY

Classic elegantly shaped stanchions, built in an English foundry from historic cast models. Sand-cast from solid bronze and hand polished and drilled.With a round foot that screws in (D = 75 mm). The stanchions are tapered.Core holes of 8 mm exist for the lifelines to run through. They can be drilled out to a maximum of 18 mm.Because of the large amount of hand work in the manufacture, small deviations in dimensions are unavoidable.

€367.00 *

Bronze stanchion with square base DAVEY

Bronze stanchion with square base DAVEY

Classic, elegantly shaped stanchions, built in an English foundry from historic cast models. Sand-cast from solid bronze and hand polished and drilled.With a fixed angled foot that screws in to the toerail or deck edge.Core holes of 8 mm exist for the lifelines to run through. They can be drilled out to a maximum of 15 mm. The stanchions are tapered. Because of the large amount of hand work in the manufacture, small deviations in dimensions are unavoidable. Size of the foot L x H x W: 97 x 72 x 59 mm.

From €269.00 *

Covered guardrail wire in metre lengths

Covered guardrail wire in metre lengths

Stainless-steel wire covered with white PVC (construction 7x7) for lifelines, guys, bolt ropes, and other uses where impact resistance and abrasion protection are crucial. We have chosen for you from the lifeline alternatives in the market the one with the thickest and thus longest-lasting cover.Shipping in metre lengths. For the best price, please order in lengths divisible by 50 meters. You will find guardrail wire on 125 m spools under "Suitable Items" at the bottom of this page. Other diameters and qualities are available on request.

From €1.95 *

Covered guardrail wire on 125m spool

Covered guardrail wire on 125m spool

Stainless-steel wire covered with white PVC (construction 7x7) for lifelines, guys, bolt ropes, and other uses where impact resistance and abrasion protection are crucial. We have chosen for you from the lifeline alternatives in the market the one with the thickest and thus longest-lasting cover.Shipping on 125 m spools. You will find guardrail wire in metre lengths under "Suitable Items" at the bottom of this page. Other diameters and qualities are available on request.

From €193.76 *

Rail hinge

Three-part fitting set for installation in a wood railing.Classic, heavy fitting of sand-cast brass, cleanly sanded and polished.An integrated barrel bolt fitting on the bottom allows the hinge to be stopped.The wood profile of the railing must be matched to the fitting.Dimensions (exterior L x W x H) 104 x 75 x 38 mm.Internal dimensions of hinge and flap catch (W x H) 67 x 30 mm (due to the sand casting process, slight dimensional deviations are possible)Weight: Hinge 720 g, latch filling 870 g.Comes in chromed or polished brass.Sold only as a complete set (two-piece latch and hinge).

From €249.00 *

Stainless steel rail gate stanchion

Stainless steel rail gate stanchion

This railing gate stanchion is a quality product from Germany, made by NIRO PETERSEN. Made from stainless steel V4A 1.4404. Pipe diameter 25mm x 1.5mm, cleanly shaped and polished. Tested by Germanischer Lloyd; approved for all regions and ships over 8 m long.For a complete railing gate two of these stanchions are needed.

€233.00 *

Stanchion socket NIRO-PETERSEN stainless steel

Stanchion socket NIRO-PETERSEN stainless steel

Quality product from Germany, made by NIRO PETERSEN. Made from stainless steel V4A 1.4404. Stanchion bases that match stanchions with a diameter of 25 mm (see the hints below). Cleanly shaped and polished.As with the stanchions, the bases are approved by GL.

From €43.49 *

Stanchions NIRO-PETERSEN stainless steel

Stanchions NIRO-PETERSEN stainless steel

This stanchion is a quality product from Germany by NIRO PETERSEN.Made of V4A stainless steel (1.4404).Tube diameter 25 mm x 1.5 mm, cleanly ground and electrolytically polished, tapered at the top.For one (size 450 mm) or two draughts.Type approval by Germanischer Lloyd for:length 450 mm for vessels under 8.0 m, cruising range Vlength 610 mm for ships over 8.0 m, all sailing ranges

From €39.50 *

Steel stanchion and stanchion ball

Steel stanchion and stanchion ball

Steel stanchions to build a stern or bulwark railing. The stanchions are neatly processed, with drilled opening and blind thread. Comes with matching bolt and grommet. The article 1325-007 is a steel ball to weld onto a steel stanchion. Additional diameters of stanchion balls are available on request.

From €13.99 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.