Triangular bowsprit shroud plate | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Art. No.	L (mm)	B (mm)	H (mm)	D1 (mm)	weight (g)	Price (unit)	Delivery time	Note list	Buy

Description

Strong shroud or chain plate with triangular ground plate made from seawater resistant cast bronze and 3 holes for mounting screws.
Surface: tumbled with matt finish.

The drilled eye of the whiskerstay fitting is situated high enough above the ground plate for the turnbuckle not to touch it.

Questions about the product?

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

Bronze bowsprit shroud plate

Bronze bowsprit shroud plate

Light shroud plate with long oval ground plate made from seawater resistant cast bronze and 2 holes for mounting screws.Surface: tumbled with matt finish.The drilled eye of the whiskerstay fitting is situated high enough above the ground plate for the turnbuckle not to touch it.

From €32.00 *

Bronze stay eye plate

Bronze stay eye plate

Solid deck plate/deck tang for the forestay made from seawater resistant cast bronze.Pentagonal, with 4 fastening holes.Stud with 2 bores (for forestay and staysail tack).Surface: tumbled with matt finish.

€239.00 *

Bronze bobstay fitting

Bronze bobstay fitting

Strongly executed, shapely fitting made of high-strength aluminium cast bronze, fine matt tumbled from European production. For attaching the water stay of the bowsprit to the stem.Also suitable as a side eye plate to hold the bowsprit side stays.The base plate of the fitting is slightly tapered downwards in plan view.Available in three sizes, the largest of which has a third hole in the base plate.

From €176.00 *

Bronze turnbuckles high tensile

Bronze turnbuckles high tensile

Bronze turnbuckle. Classic design with open body.The turnbuckle is made from high-tensile waterproof aluminum bronze.Very high breaking strength.Particularly the distortion parameters (Rp02) are about double those of stainless steel.In addition, these turnbuckles can be turned under high loads without seizing up.These turnbuckles are supplied from different manufacturers. This results in slight difference in surface polish.

From €142.00 *

Bronze 'D' shackle

Bronze 'D' shackle

Forged shackle with screw pin. Straight design.Made from high-strength manganese bronze, exceptionally cleanly worked, matt finish.Nominal size and strength are stamped on the shackle.

From €8.90 *

Bronze bowsprit fitting

Bronze bowsprit fitting

Classic fittings made from rugged cast bronze with eyes to bend wires to the spar on all 4 sides.The two eyes for the stays on top and the one below for the bobstay have been designed especially robust.Surface: tumbled with matt finish, European make.Available in two types: as an open ring or closed end fitting.Additional sizes are available on request.

From €325.00 *

More Products from Category Chain plates & stemhead fittings

Brass pad eye with threaded screw

Brass pad eye with threaded screw

Polished or chromed cast brass - for multiple uses. Long oval shape. The eye is screwed in from below with M5 threaded bolts and matching nuts. Comes complete with threaded bolts (length 60 mm) and nuts.

From €14.90 *

Bronze bobstay fitting

Bronze bobstay fitting

Strongly executed, shapely fitting made of high-strength aluminium cast bronze, fine matt tumbled from European production. For attaching the water stay of the bowsprit to the stem.Also suitable as a side eye plate to hold the bowsprit side stays.The base plate of the fitting is slightly tapered downwards in plan view.Available in three sizes, the largest of which has a third hole in the base plate.

From €176.00 *

Bronze bowsprit eye plate

Bronze bowsprit eye plate

Heavy hand-polished cast-bronze chain plate.Square form with two angled and drilled eyes, intended primarily to be mounted on deck.

€72.00 *

Bronze bowsprit plate DAVEY

Bronze bowsprit plate DAVEY

Shroud plate with protruding eye for jibstays, but also appropriate for shrouds. DAVEY 9472.The hand-polished cast-bronze mount comes undrilled, so that the attachment points can be matched to the boat's specific requirements.

From €37.00 *

Bronze bowsprit shroud plate

Bronze bowsprit shroud plate

Light shroud plate with long oval ground plate made from seawater resistant cast bronze and 2 holes for mounting screws.Surface: tumbled with matt finish.The drilled eye of the whiskerstay fitting is situated high enough above the ground plate for the turnbuckle not to touch it.

From €32.00 *

Bronze chainplate heavy SPARTAN

Bronze chainplate heavy SPARTAN

Mounting plates (chain plates) in rhombus (diamond) shapes. Two fastener holes, one eye. These heavy mounting plates cast of high-tensile marine bronze work well for attaching shackles or turnbuckles. Because of the dimensions, these plates are known for their high breaking strength. Tumbled matte finish. A product of the renowned American foundry SPARTAN.

From €49.90 *

Bronze chainplate square SPARTAN

Bronze chainplate square SPARTAN

Square mounting plate.4 fastener holes, one eye.Heavy mounting plate made of high-tensile cast marine bronze. For attaching turnbuckles and shackles. Because of the dimensions, these plates are known for their high breaking strength.Tumbled matt finish.A product of the renowned American foundry SPARTAN.

€131.00 *

Bronze pad eye

Strong padeye with round mounting plate.Polished bronze.

€88.00 *

Bronze shroud plate DAVEY

Bronze shroud plate DAVEY

Hand-polished cast-bronze plate for shrouds and stays. DAVEY No. 9471.With flat eye.The bronze shroud plate comes undrilled, so that the attachment points can be matched to the boat's specific requirements.

From €28.00 *

Bronze stay eye plate

Bronze stay eye plate

Solid deck plate/deck tang for the forestay made from seawater resistant cast bronze.Pentagonal, with 4 fastening holes.Stud with 2 bores (for forestay and staysail tack).Surface: tumbled with matt finish.

€239.00 *

Bronze staysail chainplate SPARTAN

Bronze staysail chainplate SPARTAN

Mounting plates in straight-rhombus (diamond) shapes. Designed as staysail chainplates.Four countersunk fastener holes for mounting, two attachment points (8 mm and 10 mm).Heavy mounting plates of cast manganese bronze.For attaching shackles or turnbuckles.Because of the dimensions, these plates are known for their high breaking strength.Tumbled matte finish. A product of the renowned American foundry SPARTAN.

€119.00 *

Bronze stemhead fitting DAVEY 3727

Bronze stemhead fitting DAVEY 3727

This bow fitting, made from hand-polished solid cast bronze, is intended be screwed into the stemhead.Two strong eyes with 10mm diameter for forestay, headsail, etc.. DAVEY labelling DL 3727.For small boats.

€69.90 *

Bronze trapezium shaped chainplate SPARTAN

Bronze trapezium shaped chainplate SPARTAN

Trapezoidal mounting plate.4 mounting holes, 1 eye.Heavy base plate of cast high-strength marine bronze. For attaching turnbuckles or shackles.Because of the dimensions, these plates are known for their high breaking strength.Tumbled matt finish.A product of the renowned American foundry SPARTAN.

€61.00 *

Galvanized shroud plate DL9471

Galvanized shroud plate DL9471

Traditional shroud plate for shrouds and stays, with flat eye.Hot-dip galvanized cast iron.The galvanized shroud plate is drilled with countersunk holes before it's galvanized.

From €42.49 *

lightweight bronze stemhead fitting DAVEY 3729

lightweight bronze stemhead fitting DAVEY 3729

Light bow fitting for dinghies.Made from hand-polished cast bronze.Screws into the stemhead.Two strong eyes for the forestay, etc.DAVEY labelling DL 3729.

€69.90 *

Stainless 'U' bolt WICHARD

Stainless 'U' bolt WICHARD

Patented U-bolt with watertight and UV-resistant (black) rubber cover. This deck bolt can be mounted without sealant. The shape of the rubber cover protects the deck from rattling tether carabiners and dropped wrenches. The U-bolt is made from high-quality stainless steel (1.4567) with a guaranteed breaking strength and working load. Come complete with backing plate and nuts.

From €16.51 *

Stay eye plate dinghy

Stay eye plate dinghy

Classic foredeck fitting for sailing dinghies or small cruisers.Bronze with boreholes (type Jolly 3 and type Pirat 2) for forestay and staysail tack and one elongated hole for the shackle of the mooring line.Surface: tumbled with matt finish.

From €124.00 *

Triangular bowsprit shroud plate

Triangular bowsprit shroud plate

Strong shroud or chain plate with triangular ground plate made from seawater resistant cast bronze and 3 holes for mounting screws.Surface: tumbled with matt finish.The drilled eye of the whiskerstay fitting is situated high enough above the ground plate for the turnbuckle not to touch it.

From €62.00 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.