Stainless 'U' bolt WICHARD

Brass pad eye with threaded screw

Polished or chromed cast brass - for multiple uses. Long oval shape. The eye is screwed in from below with M5 threaded bolts and matching nuts. Comes complete with threaded bolts (length 60 mm) and nuts.

From €14.90 *

Details

Bronze bobstay fitting

Strongly executed, shapely fitting made of high-strength aluminium cast bronze, fine matt tumbled from European production. For attaching the water stay of the bowsprit to the stem.Also suitable as a side eye plate to hold the bowsprit side stays.The base plate of the fitting is slightly tapered downwards in plan view.Available in three sizes, the largest of which has a third hole in the base plate.

From €176.00 *

Details

Bronze bowsprit eye plate

Heavy hand-polished cast-bronze chain plate.Square form with two angled and drilled eyes, intended primarily to be mounted on deck.

€72.00 *

Details

Bronze bowsprit plate DAVEY

Shroud plate with protruding eye for jibstays, but also appropriate for shrouds. DAVEY 9472.The hand-polished cast-bronze mount comes undrilled, so that the attachment points can be matched to the boat's specific requirements.

From €37.00 *

Details

Bronze bowsprit shroud plate

Light shroud plate with long oval ground plate made from seawater resistant cast bronze and 2 holes for mounting screws.Surface: tumbled with matt finish.The drilled eye of the whiskerstay fitting is situated high enough above the ground plate for the turnbuckle not to touch it.

From €32.00 *

Details

Bronze chainplate heavy SPARTAN

Mounting plates (chain plates) in rhombus (diamond) shapes. Two fastener holes, one eye. These heavy mounting plates cast of high-tensile marine bronze work well for attaching shackles or turnbuckles. Because of the dimensions, these plates are known for their high breaking strength. Tumbled matte finish. A product of the renowned American foundry SPARTAN.

From €49.90 *

Details

Bronze chainplate square SPARTAN

Square mounting plate.4 fastener holes, one eye.Heavy mounting plate made of high-tensile cast marine bronze. For attaching turnbuckles and shackles. Because of the dimensions, these plates are known for their high breaking strength.Tumbled matt finish.A product of the renowned American foundry SPARTAN.

€131.00 *

Details

Bronze pad eye

Strong padeye with round mounting plate.Polished bronze.

€88.00 *

Details

Bronze shroud plate DAVEY

Hand-polished cast-bronze plate for shrouds and stays. DAVEY No. 9471.With flat eye.The bronze shroud plate comes undrilled, so that the attachment points can be matched to the boat's specific requirements.

From €28.00 *

Details

Bronze stay eye plate

Solid deck plate/deck tang for the forestay made from seawater resistant cast bronze.Pentagonal, with 4 fastening holes.Stud with 2 bores (for forestay and staysail tack).Surface: tumbled with matt finish.

€239.00 *

Details

Bronze staysail chainplate SPARTAN

Mounting plates in straight-rhombus (diamond) shapes. Designed as staysail chainplates.Four countersunk fastener holes for mounting, two attachment points (8 mm and 10 mm).Heavy mounting plates of cast manganese bronze.For attaching shackles or turnbuckles.Because of the dimensions, these plates are known for their high breaking strength.Tumbled matte finish. A product of the renowned American foundry SPARTAN.

€119.00 *

Details

Bronze stemhead fitting DAVEY 3727

This bow fitting, made from hand-polished solid cast bronze, is intended be screwed into the stemhead.Two strong eyes with 10mm diameter for forestay, headsail, etc.. DAVEY labelling DL 3727.For small boats.

€69.90 *

Details

Bronze trapezium shaped chainplate SPARTAN

Trapezoidal mounting plate.4 mounting holes, 1 eye.Heavy base plate of cast high-strength marine bronze. For attaching turnbuckles or shackles.Because of the dimensions, these plates are known for their high breaking strength.Tumbled matt finish.A product of the renowned American foundry SPARTAN.

€61.00 *

Details

Galvanized shroud plate DL9471

Traditional shroud plate for shrouds and stays, with flat eye.Hot-dip galvanized cast iron.The galvanized shroud plate is drilled with countersunk holes before it's galvanized.

From €42.49 *

Details

lightweight bronze stemhead fitting DAVEY 3729

Light bow fitting for dinghies.Made from hand-polished cast bronze.Screws into the stemhead.Two strong eyes for the forestay, etc.DAVEY labelling DL 3729.

€69.90 *

Details

Stainless 'U' bolt WICHARD

Patented U-bolt with watertight and UV-resistant (black) rubber cover. This deck bolt can be mounted without sealant. The shape of the rubber cover protects the deck from rattling tether carabiners and dropped wrenches. The U-bolt is made from high-quality stainless steel (1.4567) with a guaranteed breaking strength and working load. Come complete with backing plate and nuts.

From €16.51 *

Details

Stay eye plate dinghy

Classic foredeck fitting for sailing dinghies or small cruisers.Bronze with boreholes (type Jolly 3 and type Pirat 2) for forestay and staysail tack and one elongated hole for the shackle of the mooring line.Surface: tumbled with matt finish.

From €124.00 *

Details

Triangular bowsprit shroud plate

Strong shroud or chain plate with triangular ground plate made from seawater resistant cast bronze and 3 holes for mounting screws.Surface: tumbled with matt finish.The drilled eye of the whiskerstay fitting is situated high enough above the ground plate for the turnbuckle not to touch it.

From €62.00 *

Details

Stainless 'U' bolt WICHARD

Stainless 'U' bolt WICHARD

Downloads

Downloads

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm