Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2484)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sterling
Sterling Power Products is a UK-based manufacturer of charging and power management systems, headquartered in Worcester. Since the 1990s, the company has developed products for mobile power supply on boats, vehicles, and off-grid applications. The product range includes battery chargers, DC-DC converters, inverters, lithium batteries, alternators, regulators, and energy management accessories.
Efficient and powerful battery-to-battery charger (B2B charger for short) with the latest generation of buck-boost technology. Suitable for six common battery types, including lithium batteries. a temperature sensor is included in the scope of delivery.All chargers have a bidirectional (reverse) charging function. This allows the device to be set so that it charges the primary battery (e.g. starter battery) via the secondary battery, thus preventing unwanted discharge of the primary battery. A constant voltage (U-characteristic) of 13.3 V (= trickle charge) is used for charging.Translated with DeepL.com (free version)
Induction hotplate for embedding.Ideal for installation in boats, motorhomes and caravans.The hob is made of black, toughened glass and a wired control panel with LED display makes it easy to operate. The integrated overheating protection and eight power levels ensure safe and convenient cooking.Induction hotplates are becoming increasingly popular on board.The prerequisite for this is a 230 V sine wave alternating voltage, which is provided either by shore power, a sine wave inverter or a generator.When selecting a sine wave inverter, it is important to ensure that it is large enough to operate several hobs at the same time.Sufficient battery capacity and an appropriate cable cross-section in the DC area on board must also be ensured so that the inverter can be operated (ideally a lithium battery with at least 300 Ah).When operating via a generator, it must be ensured that a pure sine wave voltage is available at the output. When calculating the correct dimensioning, other consumers must also be taken into account (this also applies to the battery capacity and the selection of the inverter).
Exceptionally compact, light and quiet:Through the newest high-frequency technology, the STERLING ProPower Q inverter produces a modified (quasi-) sine alternating current of 230 V/50 Hz from the onboard battery.Efficiency over 90 %, hign load and frequency stability, overload and short protected. As a result of the high peak performance, it can be used by appliances that require a high initial current. Thus it is well suited for most 230 Volt units. Integrated Multinorm or Schuko outlet.Units from 1000 W come with a remote (including 10 m cord), occasionally integrated in the applianceand removable when in use, able to be installed and disassembled.
Small, portable batterie-charger for worldwide using, with 100-230 volt 50-60 hz ac input. Charging characteristic: IUoUo. The housing is waterproof (IP45) and shock-resistant, with easy to use mode switch. Comes with one connection lead, complete with removeable charging cable with clamps and eyelet terminals. - Suitable for all types of lead acid batteries: Wet, GEL, AGM, Calcium. - Repairs faulty batteries if recoverable - Protects for overchart, overheating, short circuit and inverse-polarity. - LED display - low temperature battery charging mode.
The galvanic isolator ZINCSAVER protects the yacht from galvanic corrosion, when there is an electric shore connection in the harbour. The isolator unit is light, small, inexpensive and simple to install: Function:The ZINCSAVER is installed between the onboard grounding and the protective grounding of the shore connection. Thus the system can be separated from the shoreside grounding system. The onboard grounding remains as a safety ground (to protect people) always (as prescribed in the CE guidelines). The use of zinc anodes in harbour can greatly reduce, because the sacrificial zinc anodes no longer have to protect the metal from neighbouring yachts and the whole marina (thus the name "zinc saver").
The portable induction hob IHP from Sterling is a single, free-standing induction hob for use on a work surface and can be stowed away when not in use. It operates at 230 VAC / 50 Hz and delivers up to 1500 W maximum power. The power consumption can be adjusted in 8 stages from 200 to 1500 W and is therefore also designed for operation via an inverter. The cooking zone is located under a black crystal glass plate (Ø 260 mm) and consists of a double-layer coil heater. A display provides information about the power, and protection functions against overtemperature, over/under voltage and overcurrent are also integrated. Without suitable induction cookware, the appliance switches off automatically after 1 minute.portable and storable - ideal for storing in a drawer and setting up when needed.voltage 230 VAC | 50 Hz1500 W maximum powervariable power consumption | 8 settings 200 W-1500 W - ideal for inverter usegrade A black crystal plate, Ø 260 mmdouble-layer coil heatinghousing material: PP+ABSproduct size: 282 mm x 311 mm x 72 mmintelligent cooking functionspower indicator on the displayoverheating, voltage and current protectionautomatic switch-off in 1 minute without induction pan1.5 m AC cable with British Standard BS plugcE, EMC and ROHS approvalInduction hotplates are becoming increasingly popular on board.The prerequisite for this is a 230 V sine wave AC voltage, which is provided either by shore power, a sine wave inverter or a generator.When selecting a sine wave inverter, it is important to ensure that it is large enough to operate several hobs at the same time.Sterling recommends a sine wave inverter with at least 1500 W. Sufficient battery capacity and an appropriate cable cross-section in the DC area on board must also be ensured so that the inverter can be operated (ideally a lithium battery with at least 300 Ah).When operating via a generator, it must be ensured that a pure sine wave voltage is available at the output. When calculating the correct dimensioning, other consumers must also be taken into account (this also applies to the battery capacity and the selection of the inverter).
The STERLING ProPower SB(R) inverter generates a pure sine wave alternating current 230 V/50 Hz from the onboard batteries.Modern high-frequency technology with high efficiency and a variety of protective functions.Intended for exceptionally sensitive 230 V consumers (DVD players, plasma TVs, etc.) and those with high current or start current requirements (air-conditioning, washing machines, espresso makers etc.).Quite useful is the integrates USB-Out (5 V, 500 mA) to charge MP3 players, mobile phones etc.. The units are available with different outlet: - either two sockets (German Schuko and british BS1363),- or with an integrated RCD (FI) safety switch (30 mA) and connection cable (protects the 220 V onboard system).
High-performance diodes to isolate several batteries. The common charging of several batteries with a generator is made safer, and mutual discharge is inhibited. Hinders the mutual discharge of several batteries. Through the separating diodes, the starter battery remains fully charged when the house batteries are put under load. The charging current is automatically distributed throughout the battery bank. Through solid-state technology, the voltage drop in the diode is only approx. 0.6 V. Gold-plated output terminals. For 6 - 32 volt systems.
This product uses a micro processor to monitor multiple battery banks which are being charged by an alternator, ensuring that each battery receives the power required and no current back feeds through the unit. The engine start battery is always charged with priority over other batteries. Batteries will also be charged when the ProSplit fails. Very robust, waterproof (IP66) housing and LED display. Connection for two or three batterie banks. The diode voltage drop is only 0,6V because of using semiconductor technology.
The STERLING inverter provides 230 V / 50 Hz AC current from 12 V DC battery systems and is specially intended for use in boats, cars and other recreational vehicles. This inverter allows the use of notebook computers, chargers, small TVs, electric shavers, game consoles, etc. on board.Rugged aluminum housing fits in a standard beverage holder and has a plug-in contact for the cigarette lighter.Technical features:Input voltage: 10 V to 15 VDirect current max. input current: 14 AStandby consumption: 0.25 AOutput voltage: 230VOutput frequency: 50 HzFrequency response: modified sine wavecontinuous power: 100 Wmaximum power: 150 Wefficiency: 90%Battery protection at: 10 Voverheating protection: 60°C +- 5°COverload protection: Yesshort circuit protection: YesPolarity reversal protection: Yes, with fuseWeight: 450 g
Quality battery charger: Absolutely waterproof (IP68). PS125 with one outlet, the other models with two (or three at PSP12203) equal outlets for several battery banks. The isolated outputs can be coupled to charge 24 V (36V with PSP12203) batteries.Switch-mode technology allows compact dimensions and light weight. Load characteristics (3-step IUoU) for lead-acid, gel cell or AGM batteries. PS125 and PS1255 for lead-acid and gel batteries only, charge voltage 14,4/28,8V). Watertight moulded plug and charging cords (L=150cm), come with terminal crimpers and fuses.Power factor correction PFC on PSP models. Compact unit for use under severest operating conditions, salt water proof. - Input voltage 200 - 250V, 45-55Hz - Protected against overheating - Reverse-polarity and short cut protection - Power factor correction on PFC models - Parallel wiring of multiple units is possible (doubling the capacity) - Watertight (IP68), salt-water tested - Strong moulded plastic/metal housing.
STERLING ProAlt C:Highly efficient alternator-to-battery-charger (A2B). A simple generator with standard regulator is a very ineffective battery charger. The A2B charger optimizes the charging performance of the generator. Quick and easy installation !The house batteries are charged through an isolated output with 4-step IUoUo charging. No further split diodes are required! The starting battery is always charged preferentially (separated output), ensuring a safe motor start. The A2B charger offers the following functions: - Easy installation, even for nonprofessionals - No changes to the generator - IUoUo charging characteristics for house battery - For lead-acid, gel-cell or AGM batteries - Fully automatic adaptation of the balance charging - Automatic battery size recognition - Gold-plated output terminal - Protected against surges and overheating (includes temperature sensors) - Protected against overloads - Parallel connection of several units is possible (boosting the capacity).Optional remote controls are available:ABNRC remote (only for chargers AB1280, AB12130 and AB2480): small 2 line display, 2 LEDs, remote switches,ABRC remote (for all other chargers): two line diplay, remote switches. Comes with two shunts, also displays charging current (A).Choose the right size of your charger by the maximum charging current of your geneator!The remote control ABNRC only works with the AB1280 and AB12130. The remote control ABRC works with all other A2B chargers.
The new Pro Batt BBW battery-to-battery chargers from Sterling have a waterproof aluminium housing (IP68) with an attached fan(IP55, replaceable). This design results in the most powerful and efficient waterproof battery-to-battery chargers Sterling has ever developed.Installation is quick and easy thanks to the pre-fitted cable (length 1.5m) with 8mm ring terminals and pre-installed fuse. As a rule, the existing system does not need to be modified; the B2B chargers (B2B stands for "battery-to-battery") are simply installed between the primary battery and the secondary battery. They work fully automatically: as soon as the voltage of the primary battery exceeds a specified value (e.g. 13V), the charger is activated and switches off automatically if the voltage falls below this value. Unintentional discharging of the secondary battery is not possible.
This Power Management Panel (STERLING PMP1) is a combined instrument including 4 voltmeters, 4 amp meters and one amp hour counter: The amp hours of one battery bank (generally the main domestic bank) are measured and displayed like tank contents (charging current minus consumption).At three other measuring points (which require additional shunts which must be ordered separately) you may measure current (amps) and voltage (V). Indicators: Ampere hours (1x), Current (amps) (4x), Voltage (V) (4x). LCD display.For 9 - 33 V systems.Comes with 1 shunt for one measuring point. Optional accessoires: Further shunts for additional measuring points.
The STERLING ProPower S inverter generates a clear sine alternating current 230V / 50Hz from the onboard batteries.Modern high-frequency technology with high efficiency and a variety of protective functionsIntended for exceptionally sensitive 230 V consumers (DVD players, TVs, etc.)also those with exceptionally high current or initial current requirements (air-conditioning, washing machines, espresso makers, electric drill etc.).The units come with a remote control (including a 10 m cord).
The battery charger / maintainer ProBatM by STERLING keeps an extra battery 'topped up' from the main battery which has the charging device(s) connected to it (e.g. alternator, battery charger, solar cell/wind turbine etc.). The battery maintainer ProBatM works by detecting when the main battery bank reaches 13.3V / 26V and allows the excess current to be transformed to the extra battery bank with only a minor voltage drop of 0.2V.This allows the extra battery bank to be 'maintained' by charging it with several amps (max. 3A). Ideal installation: starter battery 12V/24V to domestic 12V/24V starter 12V/24V to bow thruster 12V/24V This device is not a high charging device, it's a maintenance device. For higher charging battery to battery appliances you will need a special battery to battery (B2B) charger like the ProBattC or ProBatt IP68.
Power relay with various functions and low energy consumption. Different modes can be selected. Switching voltages are freely programmable.With LED display, automatic voltage detection (12 V / 24 V) and overvoltage protection, waterproof to IP66. A remote control with additional functions, e.g. alarm, can be retrofitted. Dimensions (LxWxH): 85x90x85mmThe most important areas of application are:Battery protection relay: to disconnect the starter battery from the consumer battery when a given voltage is reached (undervoltage protection) or to disconnect the consumer battery from the consumers (deep discharge protection).Battery connection relay: connects several battery banks when a given voltage is reached and disconnects them again when the voltage falls below this. This is only possible in one direction or in both directions in the case of several energy sources (alternator, solar, wind generator).
ProCharge Ultra is more than a battery charger, it a new developped high-end battery charger, energy manager- and batterie maintanancer. Comes in a compact and corrosion-resistant plastic housing. All indicating instruments and -LEDs are on the front panel. The generel features of a professional digital battery charger (UoUo-charging curve, power supply mode, overheating protection, batterie type mode) are supplemented by: - global input power - operates with A/C 90 - 270V (40-70Hz), - 11 Pre-programmed battery charge curves - including LiFePO4, GEL, AGM, FLA and Calcium, - one customizable charging profile, - digital meters - displaying real time current and voltage measurements, - 32 LED Information Panel - internal scan and systems check, - all settings can be set from the charger, no need for a computer; - active power factor correction (PFC) - increases efficiency by almost 90%, - low activity, standby mode to increase battery life or fan noise, - battery health program and de-sulphation cycle, - multiple speed fan control to reduce unnecessary fan noise, - remote control optiion PCUR (with 10 m cabel) is deliverable.
Advanced alternator regulator, waterproof (IP67).Newly developed waterproof version of STERLING advanced regulator. In contrast to standard regulators, the STERLING advanced regulator charges using the proven IUoUo characteristics: with full charging power until the full charge is achieved, then automatically switching to trickle charging. The onboard batteries are gently but fully charged. Votage drops through long cables or split charge diodes are eliminated, because the advanced regulator measures the voltage directly at the batteries. Available versions of waterproof advanced regulator: - ProReg BW (also known as AR12W) for alternators max. 350 A (with standard regulator still fitted, 150 A stand alone) - ProReg DW (also known as PDARW) for alternators max. 400 A ((with standard regulator still fitted, 200 A stand alone) The installation requires technical knowledge.The original regulator generally remains preserved and fully operational.
Remote control STERLING BBRCN for waterproof Battery to Battery Chargers type BBW.LED-Display and switches.Remote offers additional features which cannot be tuned on the charger itself:- Displays voltage, warnings and temperatures,- independent voltmeter measuring input and output battery voltage,- Can remotely modify and regulate the charger: float, current limit, standby, on / off, Reset.Diameter of the control 54 mm.Connection cable 10,0 m is included.
Remote control and display STERLING BBURC for battery-to-battery (B2B) chargers type ProBatt Ultra (wall mount).LED display and switches.The remote control allows these display and controls:- charge voltage (V)- voltage in (V) and current (A)- temperature- alarms- on / off switch- alarm soundsDiameter 54 mm, with 10 m connection cable.
This by STERLING developed wall mounted charger ProBatt Ultra is used if an extra auxillary battery (for example, for the bow thruster) needs to be charged onboard.The connection is made directly between the primary and auxillary batteries (B2B battery to battery).Unit function: If the charge of the primary battery is over 13 V / 26 V, the ancillary battery is automatically charged. If the charge on the primary battery sinks, the charge is automatically broken off. Thus the discharge of the primary battery is reliably precluded. The charging always follows a highly effective IUoUo (4-step) process that is temperature controlled. A 24 V battery can be charged from a 12 V battery (and the reverse) using a corresponding unit. An optional remote control BBURC is available. - Easy installation - Fully isolated battery banks - Automatic battery size recognition - Fully automatic compensation charge calculation - Charge characteristics temperature-regulated (sensors included) - Low voltage warning - Gold-plated output terminal.
Remote control/display for battery-to-battery chargers (B2B) from STERLING. It can be used to set the functions of the charger remotely, for example battery type, charging characteristics, charging current, alarm thresholds. The most important current data can also be read, such as the charging voltage. The display is suitable for STERLING B2B chargers of type BB 12225, BB1240, BB1270, BB12120, BB12200.NOTE: Works optimally with chargers purchased after 6/2022. Older devices require a firmware update.Technical data:Display of voltage and charging current from B2B outputSetting of charging profiles for different battery types (lead, AGM, lithium)Charging current limitation (100, 85 or 65%)Deactivation of maintenance mode for lithium charging profilesIgnition mode controlDesulphation charging voltage setting of 15.5 V, only possible for lead-acid (LEAD) charging profilesDimensions (L x W x H): 110 x 70 x 20 mm3 m connection cable is included in the scope of delivery
