Remote control BBURC for ProBatt Ultra chargers

The battery charger / maintainer ProBatM by STERLING keeps an extra battery 'topped up' from the main battery which has the charging device(s) connected to it (e.g. alternator, battery charger, solar cell/wind turbine etc.). The battery maintainer ProBatM works by detecting when the main battery bank reaches 13.3V / 26V and allows the excess current to be transformed to the extra battery bank with only a minor voltage drop of 0.2V.This allows the extra battery bank to be 'maintained' by charging it with several amps (max. 3A). Ideal installation: starter battery 12V/24V to domestic 12V/24V starter 12V/24V to bow thruster 12V/24V This device is not a high charging device, it's a maintenance device. For higher charging battery to battery appliances you will need a special battery to battery (B2B) charger like the ProBattC or ProBatt IP68.

Remote control STERLING BBRCN for waterproof Battery to Battery Chargers type BBW.LED-Display and switches.Remote offers additional features which cannot be tuned on the charger itself:- Displays voltage, warnings and temperatures,- independent voltmeter measuring input and output battery voltage,- Can remotely modify and regulate the charger: float, current limit, standby, on / off, Reset.Diameter of the control 54 mm.Connection cable 10,0 m is included.

Remote control and display STERLING BBURC for battery-to-battery (B2B) chargers type ProBatt Ultra (wall mount).LED display and switches.The remote control allows these display and controls:- charge voltage (V)- voltage in (V) and current (A)- temperature- alarms- on / off switch- alarm soundsDiameter 54 mm, with 10 m connection cable.

This by STERLING developed wall mounted charger ProBatt Ultra is used if an extra auxillary battery (for example, for the bow thruster) needs to be charged onboard.The connection is made directly between the primary and auxillary batteries (B2B battery to battery).Unit function: If the charge of the primary battery is over 13 V / 26 V, the ancillary battery is automatically charged. If the charge on the primary battery sinks, the charge is automatically broken off. Thus the discharge of the primary battery is reliably precluded. The charging always follows a highly effective IUoUo (4-step) process that is temperature controlled. A 24 V battery can be charged from a 12 V battery (and the reverse) using a corresponding unit. An optional remote control BBURC is available. - Easy installation - Fully isolated battery banks - Automatic battery size recognition - Fully automatic compensation charge calculation - Charge characteristics temperature-regulated (sensors included) - Low voltage warning - Gold-plated output terminal.

Remote control/display for battery-to-battery chargers (B2B) from STERLING. It can be used to set the functions of the charger remotely, for example battery type, charging characteristics, charging current, alarm thresholds. The most important current data can also be read, such as the charging voltage. The display is suitable for STERLING B2B chargers of type BB 12225, BB1240, BB1270, BB12120, BB12200.NOTE: Works optimally with chargers purchased after 6/2022. Older devices require a firmware update.Technical data:Display of voltage and charging current from B2B outputSetting of charging profiles for different battery types (lead, AGM, lithium)Charging current limitation (100, 85 or 65%)Deactivation of maintenance mode for lithium charging profilesIgnition mode controlDesulphation charging voltage setting of 15.5 V, only possible for lead-acid (LEAD) charging profilesDimensions (L x W x H): 110 x 70 x 20 mm3 m connection cable is included in the scope of delivery

Efficient and powerful battery-to-battery charger (B2B charger for short) with the latest generation of buck-boost technology. Suitable for six common battery types, including lithium batteries. a temperature sensor is included in the scope of delivery.All chargers have a bidirectional (reverse) charging function. This allows the device to be set so that it charges the primary battery (e.g. starter battery) via the secondary battery, thus preventing unwanted discharge of the primary battery. A constant voltage (U-characteristic) of 13.3 V (= trickle charge) is used for charging.Translated with DeepL.com (free version)

The new Pro Batt BBW battery-to-battery chargers from Sterling have a waterproof aluminium housing (IP68) with an attached fan(IP55, replaceable). This design results in the most powerful and efficient waterproof battery-to-battery chargers Sterling has ever developed.Installation is quick and easy thanks to the pre-fitted cable (length 1.5m) with 8mm ring terminals and pre-installed fuse. As a rule, the existing system does not need to be modified; the B2B chargers (B2B stands for "battery-to-battery") are simply installed between the primary battery and the secondary battery. They work fully automatically: as soon as the voltage of the primary battery exceeds a specified value (e.g. 13V), the charger is activated and switches off automatically if the voltage falls below this value. Unintentional discharging of the secondary battery is not possible.