Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2484)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Vetus
VETUS is a manufacturer and supplier of marine equipment and systems from the Netherlands, offering a wide range of solutions for engines, propulsion, controls, and onboard technology. The company develops products specifically designed for use on yachts and motorboats, including exhaust systems, fuel supply systems, cooling water systems, shaft assemblies, bow and stern thrusters, electrical systems, as well as steering and control systems.
Each waste water tank requires an air breather line, through which unpleasant odours may escape. This can be prevented by installing a VETUS no-smell filter into the breather line.The filter is made of plastic and can be mounted on the wall. The hose connections are located on the bottom side. The NSF16S model is suitable for a 16 mm diameter vent hose.The odor-neutral filter element contains a special odor-absorbing material. The filter element is replaceable and should be renewed once a year.
Popular and proven ventilation scoops made of durable white silicone rubber with red painted on the inside. The deck flanges and the screw rings are made of white hard plastic.The hoods can be rotated and removed by the screw ring.Silicone rubber is a very flexible synthetic material that can withstand temperatures between -100°C and + 200°C. It is resistant to UV light and does not discolor, so the cowl will always look like new.Product history:The LIBEC (Silikon) model replaces the older JERRY2 (PVC) model.The CHINOOk (Silikon) model replaces the older TOM2 (PVC) model.The SAMOEN (Silikon) model replaces the older YOGI2 (PVC) model.
The dorade boxes made of polished stainless steel (AISI 316) drain off penetrating water via the cowl vents and can be sealed completely watertight using the internal mushroom ventilator. Suitable for a maximum deck thickness of 25 mm. VETUS adapter flanges are available on request for greater thicknesses.
Each waste water tank requires an air breather line, through which unpleasant odours may escape. This can be prevented by installing a VETUS no-smell filter into the breather line.The filter is made of plastic and can be mounted on the wall. The hose connections are located on the bottom side.The odor-neutral filter element contains a special odor-absorbing material. The filter element is replaceable and should be renewed once a year.The optional lid spanner can be used to open the cross lid more easily. You can find this further down on this page under "Accessories".
Original Vetus exhaust hose in very flexible exhaust hose with Lloyds approval.The special type of rubber and the tightly wound inner spiral enable installation even in confined spaces. The possible bending radius is one and a half times the diameter.Temperature-resistant from -30° C to +100° C with a short-term peak load of +115° C.Only sections in whole 1 meter increments are available. Customized goods cannot be returned.Other hose diameters on request.
Anti syphon for motor cooling water outlet or for toilet outlet. Can be connected to hoses with internal diameters of 13, 19, 25 and 32 mm. AIRVENT H without valve, comes with 4,0 m plastic hose diameter 8 mm. AIRVENT V with spring loaded valve.
Proven VETUS FTR 300 cooling water filter in all-plastic design.The transparent cover is ideal for constant monitoring and quick inspection of the degree of contamination.The large, active surface is easy to clean.The optional lid spanner can be used to open the cross lid more easily. You can find this, as well as replacement filter elements, O-rings or replacement lids, further down on this page under "Accessories".
Gooseneck for exhaust hose. Raises the exhaust hose above the waterline so that water cannot backfill the exhaust system.
Reduction fitting for attaching hoses of various diameters.The fitting can be cut for connection from the largest to smallest diameters.Safe operating temperature: max. 80°C (176 °F)
Popular and proven ventilation scoop made of durable white silicone rubber with red painted on the inside. The deck flange and the screw ring are made of white hard plastic.The hood can be rotated and removed by the screw ring.Silicone rubber is a very flexible synthetic material that can withstand temperatures between -100°C and + 200°C. It is resistant to UV light and does not discolor, so the cowl will always look like new.The TRAMON (silicone) model replaces the DONALD2 (PVC) model.Supplied without closure cap.
The self priming membrane type pump is especially suitable for pumping polluted liquids, such as toilet waste, bilge water.The robust pump casing is wholly made from plastic and is equipped with rotatable connectors with sleeves, which can easily be demounted. These contain tube valves.This construction guaranties a very flexible mounting, little danger of blockage and simple cleaning of the pump.The strong electric motor is capable of continuous operation. Pump capacity: 27 l/min Maximum suction height:: 3 m Maximum delivery height: 5 m Housing material: plastic, black Membrane material: neoprene rubber Valve material: natural rubber Current draw for 12 V DC 8 AMP Current draw for 24 V DC 5 AMP Hose fittings for 38 mm Weight: 3,7 kg Mesurements: 300 x 320 x 220 mm
Connectors specially made for water cooled exhaust pipes made from PVC.Also well suited to connect already existing and sound hoses with new exhaust components.Available straight and 60° angular.
The dorade boxes made of tough plastic drain off any water ingress via the cowl vents and can be sealed completely watertight using the integrated mushroom vent made of stainless steel (AISI 316). Suitable for corresponding VETUS cowl vent models made of silicone or stainless steel.Note: The boxes do not fit VETUS cowl vent models with a screw-on plastic ring which are named with the suffix "S" (SAMOEN-S/CHINOOK-S/LIBEC-S/TRAMON-S).The dorade boxes are supplied without cowl vents.
Popular and proven ventilation scoops made of A4 cast stainless steel. Painted red on the inside.Available in three different sizes as model JERRY, TOM or YOGI.A threaded ring, which is screwed to the deck, is used to attach the hood. The wind cap is screwed onto the threaded ring using the screw ring. The screw ring can be tightened or loosened using the supplied hook bracket in order to turn the cowl to any desired position and fix it there.A sealing cap is not included in the scope of delivery.To prevent water from entering the inside of the boat, it is recommended to mount the fan on a dorade box.
Popular and proven ventilation scoops made of A4 cast stainless steel. Painted red on the inside.Modell DONALD.A threaded ring, which is screwed to the deck, is used to attach the hood. The wind cap is screwed onto the threaded ring using the screw ring. The screw ring can be tightened or loosened using the supplied hook bracket in order to turn the cowl to any desired position and fix it there.A sealing cap is not included in the scope of delivery.To prevent water from entering the inside of the boat, it is recommended to mount the fan on a dorade box.
Cover key for easier opening of the cross cover on VETUS filters.The key is suitable for cooling water filters type FTR 330 (not for type FTR 140).The key also fits the NSF 16 (not the NSF16S), NSF 19, NSF 25 and NSF 38 odor filters.
Spare parts for the cooling water filter VETUS Typ FTR 330.Position 1 in the drawing: Spare filter element (Article-No. 1838-102).Position 3: O-Ring gasket for the cover (Article-No. 1838-103).Position 2 + 3: Cover with O-Ring gasket (Article-No. 1838-105).
Very practical bracket for the mounting of VETUS filters and other auxiliary equipment.Especially useful for mounting in engine rooms with an isolation of up to 40 mm.AISI 316 stainless steel.Shipping with two mounting bolts.
Proven VETUS FTR 140 cooling water filter in all-plastic design.The transparent cover is ideal for constant monitoring and quick inspection of the degree of contamination.The large, active surface is easy to clean.Replacement filter elements, O-sealing rings or replacement lids can be found further down on this page under "Accessories".
Spare parts for the cooling water filter VETUS Typ FTR 140.Position 1 in the drawing: Spare filter element (Article-No. 1838-110).Position 3: O-Ring gasket for the cover (Article-No. 1838-108).Position 2 + 3: Cover with O-Ring gasket (Article-No. 1838-109).
Tried and tested waterlock for engine installations with water cooled exhaust systems.Robust PVC silencer in a z design of the type WLOCK for standing or hanging mounting, with twistable inlet for many installation situations.Good to very good noise absorption. With drainage nozzle.We have three of the most common designs on offer (see the Suitable Items further down below). Various additional designs are available upon request.
Tried and tested waterlock for engine installations with water cooled exhaust systems.Robust PVC silencer in a double decker design of the type NLP.With standing, twistable muffler with twistable connectors for standing or hanging mounting in many installation situations.Good to very good noise absorption. With drainage nozzle.We have three of the most common designs on offer (see the Suitable Items further down below).Various additional designs are available upon request.
Tried and tested waterlock for engine installations with water cooled exhaust systems.Robust PVC silencer of the horizontal type NLPH with slim and twistable muffler with twistable connectors for many installation situations.Good to very good noise absorption. With drainage nozzle.We have three of the most common designs on offer (see the Suitable Items further down below). Various additional designs are available upon request.
Exhaust connection in EDPM rubber with high gloss polished stainless steel trim ring (AISI 316) Type TRCR. Mounting on the counter or the tailboard. The flanges are fitted from the outside and do not need a lock bush from the inside. For connection of the exhaust hose, a hose connector will be required.
