Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2484)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Vetus
VETUS is a manufacturer and supplier of marine equipment and systems from the Netherlands, offering a wide range of solutions for engines, propulsion, controls, and onboard technology. The company develops products specifically designed for use on yachts and motorboats, including exhaust systems, fuel supply systems, cooling water systems, shaft assemblies, bow and stern thrusters, electrical systems, as well as steering and control systems.
Transom exhaust connection, with integrated check valve TYP TRCSV. High quality stainless steel AISI 316 with high gloss polished cover to conceal fixings. The flanges are fitted from the outside and do not need a lock bush from the inside. The exhaust hose can be fitted directly to this transom connection.
Adapter deck flange made of 6 mm thick, high-gloss polished stainless steel (AISI 316) with four Ø 5.2 mm holes.For deck thicknesses over 25 mm, such as with classic wooden decks, multilayer decks or existing larger deck openings, the adapter flange offers a practical solution for mounting VETUS stainless steel dorade boxes.The VETUS dorade boxes of type BOX and BOXS are designed for deck thicknesses up to 25 mm and for a matching cut-out. Fixation is done using a white plastic flange with an external thread, which is screwed from the inside into an internal thread on the air duct of the box. Since this thread is only about 30 mm long, this mounting method is not suitable for thicker decks.In such cases, the adapter flange is required:It is placed from below against the seating surface of the dorade box and fixed using the plastic flange. Its screw-on contact surface is wider than the dorade box and allows direct fastening from above onto the deck. The actual deck thickness is irrelevant – as long as the control knob of the mushroom vent remains accessible through the opening
The sensor with bi-metal thermal switch is screwed into a small hole in the cooling water hose directly behind the exhaust manifold and warns of a lack of cooling water before the engine heats up too much. The sensor is wired to a free slot on the engine control panel or a separate VETUS alarm indicator (see accessories). At 71 °C, the sensor reacts and closes the circuit; a warning light and acoustic alarm are triggered on the panel or the external control. This allows the crew to switch off the engine before the exhaust gases, which are over 300 degrees hot, melt hoses, water collectors or silencers. Suitable for 12 and 24 V on-board power supplies.
Exhaust temperature alarm display for engines with cooling water injection into the exhaust gas. Gives a visual and audible alarm if the temperature of the exhaust gas/water mixture in the exhaust hose becomes too high (over 75 °C). Otherwise, if there are problems with the engine cooling system, the hot exhaust gases from the engine can melt hoses, water collectors or silencers before the engine overheating alarm is triggered.Ideally, the indicator is installed in combination with the exhaust gas temperature sensor from VETUS, which is not included in the scope of delivery. The indicator is available in a 12 and 24 volt version and comes with two plastic covers, one black and one silver.
Combined gooseneck and silencer for exhaust systems with cooling water injection. The upper and lower sections can be rotated through 360 degrees, making installation and connection of the exhaust hoses much easier. The NLPG has significantly improved silencing and lower back pressure in the exhaust system than the WLOCKLT system, also from Vetus. The gooseneck prevents water from flowing back into the exhaust in rough seas and the silencer also creates water turbulence inside, which leads to a significant reduction in noise.Various hose connection diameters from 40 to 90 mm available. Installation At least 45 centimeters above the waterline (measured from the top of the NLPG) and as close as possible to the middle of the boat.
Genuine VETUS oil filter, model STM0051, for M2, M3, and M4 series engines
Genuine VETUS diesel filter for engines in the M2/M3/M4/P4 series .17/19/VH4.65/80/DT(A)4.70/85/M2.02 M2.04 M2.06 M2.C5 M2.D5/M3.09
