Go to homepage
€0.00*
Jobs
Catalogue
Quick order
2939*01 VETUS Abgasdurchführung
Transom exhaust connection, with integrated check valve TYP TRCSV.
High quality stainless steel AISI 316 with high gloss polished cover to conceal fixings.
The flanges are fitted from the outside and do not need a lock bush from the inside.
The exhaust hose can be fitted directly to this transom connection.

from €110.00*

€110.00*

Prices incl. VAT plus shipping costs

model
for hose (mm)
A (mm)
B (mm)
C (mm)
Stk
View article in the TOPLICHT catalogue

Description

Transom exhaust connection, with integrated check valve TYP TRCSV.
High quality stainless steel AISI 316 with high gloss polished cover to conceal fixings.
The flanges are fitted from the outside and do not need a lock bush from the inside.
The exhaust hose can be fitted directly to this transom connection.

Downloads

Questions about the product?
Questions about the product?
Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.
Contact experts
Exhaust pipe VETUS
Exhaust pipe VETUS
Original Vetus exhaust hose in very flexible exhaust hose with Lloyds approval.The special type of rubber and the tightly wound inner spiral enable installation even in confined spaces. The possible bending radius is one and a half times the diameter.Temperature-resistant from -30° C to +100° C with a short-term peak load of +115° C.Only sections in whole 1 meter increments are available. Customized goods cannot be returned.Other hose diameters on request.

From €48.50 *
Details

More Products from Category Exhaust systems

Exhaust hose
Exhaust hose
Very flexible exhaust hose for water-cooled (wet) exhaust systems on board yachts. It has R.I.N.A. (DIP 075110CS) and Lloyds (No. 96/00127) approval for diesel and also petrol engines with very high exhaust temperatures. Approved from -30 to +100° Celsius, short-term loads also up to 115° Celsius. The hose is available in various inner diameters from 40 to 90 millimeters.This hose has a very small bending radius due to the integrated steel spiral, the values for which can be found in the table. It also complies with the US standard SAE J 2006:2003 R1/R2 and the ISO standard 13363:2006 Tipo 2 Classe BAvailable to measure in whole 1-meter increments. Customized goods cannot be returned.

From €35.50 *
Details
Exhaust hose connectors straight/60° VETUS
Exhaust hose connectors straight/60° VETUS
Connectors specially made for water cooled exhaust pipes made from PVC.Also well suited to connect already existing and sound hoses with new exhaust components.Available straight and 60° angular.

From €17.90 *
Details
Exhaust pipe VETUS
Exhaust pipe VETUS
Original Vetus exhaust hose in very flexible exhaust hose with Lloyds approval.The special type of rubber and the tightly wound inner spiral enable installation even in confined spaces. The possible bending radius is one and a half times the diameter.Temperature-resistant from -30° C to +100° C with a short-term peak load of +115° C.Only sections in whole 1 meter increments are available. Customized goods cannot be returned.Other hose diameters on request.

From €48.50 *
Details
Seawater-proof bronze exhaust flange SPARTAN
Seawater-proof bronze exhaust flange SPARTAN
Very thick-walled and heavy through-hull made from seawater-proof marine bronze (CuSn5Zn5Pb5).Attached to the hull using countersunk fastener holes, drilled through the strong flange.Molded from bronze in a single piece, tumbled matte finish.Intended for exhaust and cooling water.

From €98.00 *
Details
VETUS AIRVENT anti syphon
VETUS AIRVENT anti syphon
Anti syphon for motor cooling water outlet or for toilet outlet. Can be connected to hoses with internal diameters of 13, 19, 25 and 32 mm. AIRVENT H without valve, comes with 4,0 m plastic hose diameter 8 mm. AIRVENT V with spring loaded valve.

From €115.00 *
Details
VETUS exhaust flange
VETUS exhaust flange
Exhaust connection in EDPM rubber with high gloss polished stainless steel trim ring (AISI 316) Type TRCR. Mounting on the counter or the tailboard. The flanges are fitted from the outside and do not need a lock bush from the inside. For connection of the exhaust hose, a hose connector will be required.

From €71.95 *
Details
VETUS exhaust flange stainless steel
VETUS exhaust flange stainless steel
Transom exhaust connection, with integrated check valve TYP TRCSV. High quality stainless steel AISI 316 with high gloss polished cover to conceal fixings. The flanges are fitted from the outside and do not need a lock bush from the inside. The exhaust hose can be fitted directly to this transom connection.

From €110.00 *
Details
VETUS exhaust temperature gauge
VETUS exhaust temperature gauge
Exhaust temperature alarm display for engines with cooling water injection into the exhaust gas. Gives a visual and audible alarm if the temperature of the exhaust gas/water mixture in the exhaust hose becomes too high (over 75 °C). Otherwise, if there are problems with the engine cooling system, the hot exhaust gases from the engine can melt hoses, water collectors or silencers before the engine overheating alarm is triggered.Ideally, the indicator is installed in combination with the exhaust gas temperature sensor from VETUS, which is not included in the scope of delivery. The indicator is available in a 12 and 24 volt version and comes with two plastic covers, one black and one silver.

From €109.90 *
Details
VETUS Gooseneck for exhaust systems WLOCKLT
VETUS Gooseneck for exhaust systems WLOCKLT
Gooseneck for exhaust hose. Raises the exhaust hose above the waterline so that water cannot backfill the exhaust system.

From €147.50 *
Details
VETUS gooseneck NLPG
VETUS gooseneck NLPG
Combined gooseneck and silencer for exhaust systems with cooling water injection. The upper and lower sections can be rotated through 360 degrees, making installation and connection of the exhaust hoses much easier. The NLPG has significantly improved silencing and lower back pressure in the exhaust system than the WLOCKLT system, also from Vetus. The gooseneck prevents water from flowing back into the exhaust in rough seas and the silencer also creates water turbulence inside, which leads to a significant reduction in noise.Various hose connection diameters from 40 to 90 mm available. Installation At least 45 centimeters above the waterline (measured from the top of the NLPG) and as close as possible to the middle of the boat.

From €236.00 *
Details
VETUS hose sensor exhaust temperature alarm
VETUS hose sensor exhaust temperature alarm
The sensor with bi-metal thermal switch is screwed into a small hole in the cooling water hose directly behind the exhaust manifold and warns of a lack of cooling water before the engine heats up too much. The sensor is wired to a free slot on the engine control panel or a separate VETUS alarm indicator (see accessories). At 71 °C, the sensor reacts and closes the circuit; a warning light and acoustic alarm are triggered on the panel or the external control. This allows the crew to switch off the engine before the exhaust gases, which are over 300 degrees hot, melt hoses, water collectors or silencers. Suitable for 12 and 24 V on-board power supplies.

€139.90 *
Details
VETUS waterlock / exhaust silencer NLP
VETUS waterlock / exhaust silencer NLP
Tried and tested waterlock for engine installations with water cooled exhaust systems.Robust PVC silencer in a double decker design of the type NLP.With standing, twistable muffler with twistable connectors for standing or hanging mounting in many installation situations.Good to very good noise absorption. With drainage nozzle.We have three of the most common designs on offer (see the Suitable Items further down below).Various additional designs are available upon request.

From €234.00 *
Details
VETUS waterlock / exhaust silencer NLPH
VETUS waterlock / exhaust silencer NLPH
Tried and tested waterlock for engine installations with water cooled exhaust systems.Robust PVC silencer of the horizontal type NLPH with slim and twistable muffler with twistable connectors for many installation situations.Good to very good noise absorption. With drainage nozzle.We have three of the most common designs on offer (see the Suitable Items further down below). Various additional designs are available upon request.

From €229.00 *
Details
VETUS waterlock / exhaust silencer WLOCK
VETUS waterlock / exhaust silencer WLOCK
Tried and tested waterlock for engine installations with water cooled exhaust systems.Robust PVC silencer in a z design of the type WLOCK for standing or hanging mounting, with twistable inlet for many installation situations.Good to very good noise absorption. With drainage nozzle.We have three of the most common designs on offer (see the Suitable Items further down below). Various additional designs are available upon request.

From €169.00 *
Details

Last seen products