Seawater-proof bronze exhaust flange SPARTAN
Very thick-walled and heavy through-hull made from seawater-proof marine bronze (CuSn5Zn5Pb5).
Attached to the hull using countersunk fastener holes, drilled through the strong flange.
Molded from bronze in a single piece, tumbled matte finish.
Intended for exhaust and cooling water.
from €98.00*
€98.00
Prices incl. VAT plus shipping costs
Description
Very thick-walled and heavy through-hull made from seawater-proof marine bronze (CuSn5Zn5Pb5).
Attached to the hull using countersunk fastener holes, drilled through the strong flange.
Molded from bronze in a single piece, tumbled matte finish.
Intended for exhaust and cooling water.
Exhaust connection in EDPM rubber with high gloss polished stainless steel trim ring (AISI 316) Type TRCR. Mounting on the counter or the tailboard. The flanges are fitted from the outside and do not need a lock bush from the inside. For connection of the exhaust hose, a hose connector will be required.
Transom exhaust connection, with integrated check valve TYP TRCSV. High quality stainless steel AISI 316 with high gloss polished cover to conceal fixings. The flanges are fitted from the outside and do not need a lock bush from the inside. The exhaust hose can be fitted directly to this transom connection.
Original Vetus exhaust hose in very flexible exhaust hose with Lloyds approval.The special type of rubber and the tightly wound inner spiral enable installation even in confined spaces. The possible bending radius is one and a half times the diameter.Temperature-resistant from -30° C to +100° C with a short-term peak load of +115° C.Only sections in whole 1 meter increments are available. Customized goods cannot be returned.Other hose diameters on request.
Very thick-walled and heavy through-hull made from seawater-proof marine bronze (CuSn5Zn5Pb5).Attached to the hull using countersunk fastener holes, drilled through the strong flange.Molded from bronze in a single piece, tumbled matte finish.Intended for exhaust and cooling water.
Standard length through hull fitting.Made from saltwater resistant bronze alloy CC491K (CuSn5Zn5Pb5-C).Type approval:RINA ISO 9093:2020LLOYD’S REGISTERThread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.You can find suitable seawater-resistant bronze strainers under accessories.
Through hull made from saltwater resistant bronze alloy CC491K (CuSn5Zn5Pb5-C). With fixed, long slotted sieve.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
Through-hull fitting made from saltwater resistant bronze alloy CC491K (CuSn5Zn5Pb5-C). With fixed, round sieve.Type approval:RINA ISO 9093:2020LLOYD’S REGISTERThread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
Through hull made from seawater-resistant bronze alloy CC491K (CuSn5Zn5Pb5-C). An extra-long, thick-walled design for wooden ships with thick or double planking.Zulassung:RINA ISO 9093:2020LLOYD’S REGISTERYou can find suitable seawater-resistant bronze strainers under accessories.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
Through hull made from seawater-resistant bronze alloy CC491K (CuSn5Zn5Pb5-C). An extra-long, thick-walled design for wooden ships with thick or double planking.This version has a wide outer rim and is not designed for the attachment of a strainer, so the "Strainers for gunmetal flush fitting" do not fit here. If a strainer is to be fitted, the "Seawater resistant bronze thru-hull x-large" item (1916-319 etc.) should be selected, which you can also find below under similar products.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
Solid strainer made of seawater-proof bronze (seawater-resistant bronze alloy CC491K (CuSn5Zn5Pb5-C). These loose strainers for the water inlet precisely match the diameter of the outer flange of the corresponding seawater-proof bronze through-hull fittings. These can be found under similar products.The strainers have three holes for fastening to the underwater hull. The thread size assigned to the strainer for the corresponding thru-hull is marked/moulded on the strainer.The thru-hulls are not included and must be ordered separately.
