Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(43)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(11)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2525)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
-
(1)
Sure thru
Products from Veneziani
Veneziani Yachting is a brand of Boero Bartolomeo S.p.A., headquartered in Genoa, Italy. With more than 150 years of history in developing paints and coating systems, the company today offers products for the protection and maintenance of boats and yachts. The range includes antifouling paints, primers, fillers, base and finish coats, wood protection systems, as well as complementary products such as thinners and additives.
VENEZIANI EUROSPRINT ECO Biocide Free UW-Paint
From
€47.90 *
VENEZIANI EUROSPRINT ECO is a biocide-free, solvent-based paint for underwater hulls. Thanks to the hard matrix, it is also suitable for high sailing speeds. The paint can be applied to all substrates and is suitable for mixed and fresh waters.Note: The effectiveness of biocide-free underwater coatings depends on the area of operation and the boat's sailing characteristics. Regular inspection of the hull during the season is recommended. Any fouling that occurs can be minimized by gentle cleaning with a sponge or soft brush.Technical dataArea of application: Waters with light foulingBoat type: Motor and sailing boats of all speedsSubstrate (with appropriate primer): all materials, including aluminumCoverage: approx. 12.5 m²/lDilution: VENEZIANI Thinner 6470Application method: Brush, roller, spraying (professional use only)Drying times at 10°C: Recoatable: after approx. 18 hoursService life (time between painting and wetting) at 10°C: min. 24 hours to 6 monthsFurther information on processing can be found in the technical data sheet under "Downloads".
