Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2481)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(14)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Tercoo
Tercoo® is a manufacturer of rotary blasting discs for surface treatment from the Netherlands. The products are an alternative to sandblasting and remove rust, paint, tar, epoxy, filler, and adhesive residues from materials such as steel, iron, concrete, stone, and polyester. The process produces a blasted surface with defined roughness, ready for new protective coatings. Tercoo® discs are designed for use with drills (3000–4000 rpm) or special polishing machines.
TERCOO is a rotating disk for the removal of rust, paint, tar, epoxy, paint, adhesives etc. from various materials such as steel, iron or other metals.The rubber disks may be attached to a standard drill and allow rust or paint removal, as thoroughly as sandblasting.The result is a sandblasted surface with the appropriate texture suitable for the application of a new protective coating.TERCOO provides the correct surface preparation for proper adhesion of new protective coatings.With revs of 1500 - max. 4000 RPM up to 6 sq.m. can be worked with a single disk in one hour. Available designs:Metal (brown): single disk, one pin row. Metal (brown): double disk, two pin rows. Metal (brown): triple disk, three pin rows.
Suction device compatible with the TERCOO metal scraper disks. Minimises the rust, dust and paint particles produced from grinding and is recommended in addition to a face mask when working on or under the ship. Fits Hoovers with a hose diameter of 25mm. In combination with the TERCOO guiding rail with spacer the work - for instance below the waterline - is definitely made easier.
The TERCOO spacer tool makes working with TERCOO washers easier. An adjusting screw is used to set the distance to the workpiece so that work can be carried out evenly and with little effort. The large handle provides additional support when sanding. Suitable for all standard drilling machines.In combination with the TERCOO dust extractor, sanding is easy and almost dust-free.
