Produkte von Epifanes

EPIFANES BLACK BOTTOM flexible bitumen-based protective coating for the area above and below the waterline.This modern version of the so-called black varnish adheres well to raw steel and wood surfaces as well as existing tar and bitumen layers and synthetic primers. It is easy to apply, offers high UV resistance, elasticity and protection against the changing influences of water and air.Note: It is recommended to apply the first layer with 15-25% with EPIFANES 1K-Spraythinner and use a stiff brush to work the paint onto the surface. For effective corrosion protection on new hulls, apply at least 250-300 μm to the raw substrate in the underwater area. Technical DataSubstrate: Steel, wood, existing tar coatings (repair/maintenance)Surface preparation:Clean, dry, degreased, well-sanded surface, free of rust, dust and adhesionDegrease with EPIFANES 1K Spray Thinner; rinse off water-soluble residues with fresh waterFollow-up coat: Overcoatable with EPIFANES Copper-Free AntifoulingCoverage: approx. 10 m²/l at 50 µm dry film thicknessThinner:Brush: EPIFANES Brush ThinnerSpray: EPIFANES Spray Thinner for 1C lacquers and primersAirless: EPIFANES D-100Application method: Brush, roller, conventional spray gun, airless sprayDrying times at 20 °C: Dust dry after 2 hrs, recoatable after 12 hrsFurther information on applying this product can be found in the technical data sheet under “Downloads”.

Universal special thinner for various Epifanes products such as EPIFANES CR Antifouling Primer or antifoulings such as EPIFANES FOUL-AWAY. It is used to adjust the application viscosity and is also suitable for cleaning tools after application.Application: Add to the respective Epifanes product in small quantities until the desired viscosity is achieved. Do not dilute more than necessary to avoid impairing drying and layer build-up. Also suitable for cleaning brushes, rollers and spraying equipment after use. Observe the safety instructions on the container and safety data sheet.

Single-component, semi-gloss deck paint based on urethane/alkyd resin. EPIFANES Non-Skid Deckcoating contains tiny polypropylene beads that form a non-slip surface after drying. Suitable as a non-skid topcoat on single-component paint systems on wood, steel, aluminum, or gelcoat/GRP.Application: Stir the paint thoroughly before and during use to ensure the beads are evenly distributed in the coating. Apply two coats with a short-haired velour roller without wet-on-wet application. Allow at least three days to dry before the first use. Color chart note: The displayed colors correspond as closely as possible to the original shades, but deviations cannot be ruled out for technical reasons. The color numbers of the non-skid deck paint are comparable to the color codes of EPIFANES MONO-URETHANE or EPIFANES Yacht Enamel, but color deviations may also occur due to the separate manufacturing process of the products.Technical DataApplication area: Non-slip deck coating for GRP, wood, steel, and aluminumSubstrate: existing single-component systems or after priming with EPIFANES coating build-upCompatible with: 1K paint systems, e.g. EPIFANES MONO-URETHANE (e.g. Art. No. 2055-175)Coverage: approx. 4–8 m²/l at 50 µm dry film thicknessThinner: EPIFANES Paint Thinner (Art. No. 2059-001) or EPIFANES 1-K Spray Thinner (Art. No. 2059-110)Application method: short-nap velour rollerDrying times (at 15 °C): dust-dry: 2 hrs, recoatable: 36 hrs, loadable: after at least 3 daysFurther information on application can be found in the Technical Data Sheet under 'Downloads'.

Penetrating oil based on natural oils, which is used as an additive to improve the flow properties of conventional and semi-synthetic paints. It reduces visible brush strokes, impregnates wood and has a rust-inhibiting effect on steel by penetrating deep into the substrate. This means that a favorable result can be achieved even under difficult conditions.

Water-based cleaner for teak and other tropical hardwoods. Cleans and brightens weathered and dirty wood surfaces. Renews original color tone without attacking deck caulking sealant.Can be applied quickly and easily, suitable for both salt and fresh water areas. Ideal for preparing the wood for further treatment with EPIFANES Teak-O-Bello Teak Protector.Coverage: ca. 7 qm/l.

EPIFANES SEAPOWER Cleaner & Wax is a "one-step" cleaner containing high quality carnauba wax. This combination cleans and maintains the boat in one step and provides optimal protection with a long lasting, glossy finish during the season. For a harder wax layer, EPIFANES SEAPOWER Super Poly Wax can be additionally applied to the cleaned surface.Application: The product should applied on a cloth and and rubbed in and out thoroughly in circular, overlapping movements. Allow the product to dry well before rubbing it off. A polishing effect can be achieved by applying more pressure when brushing. Change the cloth frequently to ensure a brilliant gloss.Contents: 500 ml bottle.EPIFANES-Seapower cleaners and polishes are proven products that have been used for years to clean and maintain boats. EPIFANES has an optimal product for each surface, regular cleaning and waxing not only makes clean, but also permanently protects against dirt and weathering.

Simple, single-component fine and smoothing filler for wood and single-component paint systems above the waterline. Suitable for leveling unevenness on surfaces, for example as an intermediate step after priming and before the first coat of paint.&nbsp

Wooden mixing sticks from EPIFANES. Available in two sizes to match the EPIFANES paint cans.

Classic, high-gloss yacht varnish based on alkyd resin for applications above the waterline. EPIFANES BOOTSLACK colored is suitable for primed surfaces made of wood, steel, aluminium and GRP indoors and outdoors and is resistant to salt and fresh water. It is characterized by optimum flow properties, long-lasting gloss and good weather resistance. Compatible with many existing 1-component and 2-component systems and can also be recoated with EPIFANES MONO-URETHANE (Art. No. 2055-101) or EPIFANES NAUTIFORTE (Art. No. 2054-102).Application The substrate must be clean, dry and free of dust and grease. Sand old coats, remove loose or non-adherent layers. Apply with a brush, roller or sprayer at temperatures above 8 °C and relative humidity below 85 %. Do not apply wet-on-wet. Intermediate sanding is required for a uniform gloss. The recommended wet film thickness is 70-80 µm, corresponding to 35-40 µm dry. Use EPIFANES MULTI MARINE PRIMER (Art. No. 2062-102) as a primer, for aluminum surfaces additionally&nbsp

EPIFANES AQUA MARINE SATIN VARNISH is a water-based, satin-finish interior clear varnish based on polyurethane/acrylic resin. It is characterized by high scratch resistance, fast drying, and high resistance to alcohol and common household cleaners. Suitable for all types of wood in interior areas and results in a clear, even surface after drying. The product is VOC-reduced and low-odor, ideal for interiors with high demands on application and environmental compatibility.Application: For bare wood, a multi-layer build-up with EPIFANES CLEAR BOAT VARNISH (Art. No. 2050-001) is recommended, which is then finished with two coats of EPIFANES AQUA MARINE SATIN VARNISH. Alternatively, the varnish can be applied directly to clean and sanded old coatings. Application is done with a brush or spray gun at temperatures above 8 °C and max. 85% relative humidity. An intermediate sanding with P220 is required between coats. Thinning with water up to a maximum of 15% is possible. Note: The varnish appears milky during application but dries clear.Technical DataApplication area: Satin-finish clear varnish for all wooden surfaces indoorsSubstrate: Clean, dry, grease-free; suitable for all types of woodPrimer: Multi-layer base with EPIFANES CLEAR BOAT VARNISH (Art. No. 2050-001) recommendedCoverage: approx. 12 m²/l at 25 µm dry film thicknessThinning: Water, 0–15%Application method: Brush or spray gun (1.5–1.8 mm, 2–3 bar)Drying times (at 20 °C, 65% r.h.): Dust-dry: 1 hr, sandable: 4 hrs, recoatable: 6 hrsFor more information on application, please refer to the Technical Data Sheet under 'Downloads'.

EPIFANES FLAT BLACK is a one-component, black matte finish based on urethane resin for interior and exterior areas. With a gloss rate of only 5–10%, it gives surfaces a modern, matte appearance. The product is resistant to alcohol and common household cleaners and has high scratch resistance.Application: The substrate must be clean, dry, grease-free, and sanded; application is done with a brush, roller, or spray gun. On GRP, steel, wood, or aluminum, a suitable primer such as EPIFANES MULTI MARINE PRIMER (Art.No. 2066-175) is recommended, depending on the material. Indoors, up to three coats are applied directly to the previously primed surface. Outdoors, a build-up with a high-gloss varnish such as EPIFANES MONO-URETHANE (Art.No. 2055-101) is recommended, followed by a final coating with 1–2 coats of EPIFANES FLAT BLACK.Technical DataApplication area: Matte finish for wood, steel, aluminum, GRP in interior and exterior areas above the waterlineSubstrate: Clean, dry, grease-free, sandedPrimer: Compatible with most EPIFANES paints and primersCoverage: approx. 15 m²/l at 35 µm dry film thicknessThinner: EPIFANES BRUSH THINNER FOR PAINTS & LACQUERS (Art.No. 2059-001); EPIFANES 1-C SPRAY THINNER (Art.No. 2059-110)Application method: Brush, roller, spray equipment (professional users)Drying times (at 15 °C): Dust dry: 3 hrs, sandable and re-coatable: 48 hrsFurther information on application can be found in the Technical Data Sheet under 'Downloads'.

Pure stand oil. When adding 2 % maximum it can prolong the initial drying period and the process time of all half syntectic single component boat varnishes and coloured lacquer.

WERDOL Primer Paint is a one-component, traditional primer for use on untreated wood. Good filling and covering properties for interior and exterior use. Suitable as a primer for one-component paint systems above the waterline. Can be overcoated with all EPIFANES one-component color paints.Technical DataSubstrate: Wood (above the waterline, interior and exterior)Surface preparation:Wood moisture max. 15–17 %Degrease oily wood with EPIFANES 1C Spray Thinner or special benzineSand with grit 60–80 along the grain, then with 100–220Remove sanding dust thoroughlyTopcoat: One-component alkyd-resin based paints Coverage: approx. 12 m²/l Thinner: EPIFANES Brush Thinner (brush/roller), EPIFANES 1C Spray Thinner (spray), EPIFANES D-100 (airless)Application method: Brush, roller, spray gun (professional use)Drying times at 20 °C: Dust dry after 2 hrs; recoatable after 24 hrsFurther information on processing can be found in the technical data sheet under “Downloads”.

WERDOL Bleimennige is a traditional, rust-preventing primer based on a modified linseed oil alkyd resin and a mixture of lead and iron oxide. Provides excellent rust protection on steel and has a rot-preventive effect on untreated wood. Nowadays it is mainly used for restoration work, as the lead oxide it contains is harmful to health and toxic to reproduction. Not suitable for use under water.This product may only be shipped to resellers, professional users and public research and teaching institutions in accordance with the Chemicals Prohibition Ordinance. Are you one of these customers? Then send us your inquiry here with a corresponding user certificate. We will be happy to provide you with a quotation.Technical dataSubstrates: Steel, iron, wood (above the waterline)Pre-treatment:Surface must be clean, dry and free of greaseRemove loose layers of rust and paintSubsequent coat: Single-component alkyd resin paints (e.g. EPIFANES boat paint, WERDOL Coasterlak)Coverage: approx. 12 m²/l with 50 µm dry film thicknessThinner: EPIFANES paint thinnerApplication method: Brush, rollerDrying times at 18 °C: Recoatable after 12 hours.Note: Contains lead. Do not use for painting objects that could be chewed or sucked by children. Contains cobalt carboxylate. May cause an allergic reaction.

Heat-resistant, single-component paint for the protection and enhancement of steel and iron surfaces exposed to temperatures of 400-1000°C, such as exhaust systems. Application: The surface should be dry, clean, and free of grease. Remove rust and loose parts. The paint is applied in a thin layer directly onto bare steel. After the paint has dried, the surface must be heated to at least 400°C to cure the binder.Safety note: Do not touch the surface (even when cold), the paint has a caustic effect.Technical dataApplication area: Heat-resistant paint for metal surfacesSubstrate: Steel, (cast) iron exposed to high temperaturesCoverage: approx. 12 m2/l.Thinner: EPIFANES paint thinner (Art.No. 2059-001)Application method: Brush, rollerDrying times (at 20°C): dust-dry after 15 min., tack-free after 1 hr., re-coatable after 12 hrs.

A high-gloss, single-component yacht paint based on a non-yellowing, siliconized alkyd resin. The binder ensures long-lasting gloss retention, minimal dirt adhesion, and high color stability. EPIFANES NAUTIFORTE Yacht Paint is easy to apply and offers high coverage due to high-quality pigments. Suitable for new coatings on wood, steel, and aluminum in combination with a suitable primer, as well as for GRP surfaces. Also suitable for maintaining existing, intact 1- and 2-component coatings above the waterline, regardless of the manufacturer.Application: The substrate must be clean, dry, free of grease, and sanded. Application is done with a roller, soft long-haired brush, or spray gun at temperatures from 8–30 °C and relative humidity between 50–85%. Do not apply wet-on-wet and avoid excessively thick wet coats to prevent runs and drying problems. Recommended primers for substrate preparation are EPIFANES MULTI MARINE PRIMER (Art.No. 2066-175), for new aluminum EPIFANES WASHPRIMER AQ (Art.No. 2062-005). For a new coating, three coats are recommended, each with intermediate sanding (P400 or sanding fleece) by hand. Note on the color chart: The colors shown correspond as closely as possible to the original colors, but deviations cannot be ruled out.Technical dataApplication area: High-gloss, non-yellowing yacht varnish for wood, steel, aluminum, GRP above the waterlineSubstrate: Clean, dry, grease-free, sanded; in combination with suitable primerPrimer: EPIFANES MULTI MARINE PRIMER, EPIFANES WASHPRIMER AQ Coverage: approx. 14 m²/l at 40 µm dry film thicknessThinner: EPIFANES Paint Thinner (Art.No 2059-001), EPIFANES 1-K Spray Thinner (Art.No 2059-110) Application method: Brush, roller, spray gun (professional users)Drying times (at 20 °C): Dust dry: 1 hr, sandable and recoatable: 18 hrsFurther information on application can be found in the Technical Data Sheet under 'Downloads'.

EPIFANES MULTILUX is a high-gloss, non-yellowing 1-component white enamel based on siliconized alkyd resins. It is characterized by very good weather resistance, long-lasting gloss, fast drying, and good flow properties. Suitable as a topcoat for areas such as the bulwark or superstructures. Can be applied to gelcoat/GRP, steel, wood, and aluminum in interior and exterior areas above the waterline, as well as for repainting existing 1-C and 2-C coatings. On gelcoat, the paint can also be applied without primer if the surface is properly prepared.Application Apply with a long-haired, soft brush, roller, or spray gun at temperatures between 10 °C and 28 °C and relative humidity between 50 % and 75 %. Do not apply wet-on-wet, observe overcoating intervals. An intermediate sanding with P220 is recommended between coats. For long-term outdoor protection, at least 100–120 µm dry film thickness (approx. 3 brush coats or 4 roller coats) should be applied.Technical dataApplication area: Interior and exterior areas above the waterline Substrate: Intact, clean, degreased, and sanded 1-C or 2-C paints or primers; new gelcoat degreased and sandedPrimer: Common 1-C and 2-C primers such as EPIFANES MULTIMARINE PRIMER (Art.No. 2066-175)Coverage: approx. 13 m²/l at 40 µm dry film thicknessThinner: EPIFANES PAINT THINNER (Art.No. 2059-001), 1-C SPRAY THINNER (Art.No. 2059-110)Application method: Brush, roller, air spray (1.3–1.8 mm, 3 bar) or airless (0.013–0.015”, 140–160 bar)Drying times (at 20 °C): Dust dry: 1 h, sandable: 18 h, recoatable: 18 hFurther information on application can be found in the technical data sheet under 'Downloads'.

Classic, high-gloss graphite paint based on alkyd and urethane resins, e.g. for the hatch coaming and numerous other applications for interior and exterior use above the waterline. The coating is suitable for steel surfaces above the waterline and creates a smooth, dark metallic glossy surface. Due to the smooth and non-porous surface, dirt does not stick to it and the paint is easy to clean.Application: The surface must be clean, dry, grease-free, and sanded. For steel, a primer with a suitable primer such as EPIFANES MULTI MARINE PRIMER is recommended. Stir well before use. Apply with brush, roller, or spray gun at temperatures from 10 °C. Thinning is possible with EPIFANES PAINT THINNER or white spirit. Intermediate sanding between coats is recommended. Recoatable after approx. 18 hours at 18 °C.Technical DataArea of application: Glossy graphite paint for applications on steel surfaces above the waterlineSurface: Steel, clean, dry, grease-free, and sandedPrimer: EPIFANES MULTI MARINE PRIMER (Art.No. 2066-175) Coverage: approx. 12 m²/lThinner: EPIFANES PAINT THINNER (Art.No. 2059-001) or white spiritApplication method: Brush, roller, or spray gunDrying times (at 18 °C): Recoatable after approx. 18 hrsFurther information on application can be found on the product packaging.

Two-component filler for minor repairs above the waterline for steel and GRP (polyester), which can also be applied in thick layers. Can be overcoated with 1- and 2-component paints and lacquers.Application: Place the desired amount of filler on a clean mixing board and add 2-4% hardener. Mix both thoroughly. Work quickly. It is advisable to mix smaller quantities more frequently, especially when working at higher temperatures. This helps to avoid mixing too much; additionally, larger amounts of mixed filler harden faster.Tip: Sand immediately after drying and prime with 20% diluted paint to prevent moisture absorption and shrinkage of the paint layers.Safety note: Contains styrene. Use only outdoors or in well-ventilated areas and wear personal protective equipment (mask, eye protection, gloves) during application. The shipment of this product is only permitted in accordance with the EU Chemicals Prohibition Ordinance  (REACH) to resellers, professional users, and public research and educational institutions. Are you part of this customer group? Then send us your inquiry here. We will be happy to provide you with a delivery offer.Technical DataApplication: Surface touch-ups, small repairsSubstrate: GRP or existing paint systems above the waterline Application method: Manual fillingSubsequent coating: with all common 1K and 2K products from EPIFANESPot life (working time): 5-10 minutesDrying times at 18°C: 30-60 minutes 

The EPIFANES Hardener is suitable for accelerating the drying time of all semi-synthetic one-component varnishes and paints from EPIFANES. Suitable for use on surfaces where the varnish needs to dry faster due to temperature or time constraints, or indoors (e.g. on furniture, work surfaces), where an abrasion-resistant, less flexible varnish surface is desired.Application: Mix 5 - 7 % of the hardener into the desired varnish color. Adding this amount significantly reduces the drying time of the varnish without substantially affecting its technical properties. Adding a higher amount of hardener (max. 50%) makes the varnish harder and more abrasion-resistant, but may result in a loss of gloss, UV stability, elasticity and brushability.Important: Not suitable for use with the EPIFANES varnishes MONO-URETHANE or NAUTIFORTE.

Special thinner for spraying PU-SPEEDCOAT from EPIFANES. Attention: This product is no longer manufactured, the stock is remaining stock.

EPIFANES Seapower Inflatable Cleaner is a special liquid product for cleaning and maintaining all types of inflatable boats and can be used on materials such as butyl, hypalon, rubber and vinyl. Stubborn dirt and stains such as tar, diesel oil and marks from shoe soles can be easily removed with the cleaner. At the same time, the product has a caring and protective effect and maintains the flexibility of the material. For surfaces made of rubber and vinyl, Boat Cleaner also prevents them from becoming brittle or sticky due to sunlight exposure. This makes the Boat Cleaner also ideal for use on fenders.Contents: 500 ml bottle.EPIFANES-Seapower cleaners are proven products that have been used for years to clean and maintain boats. EPIFANES has an optimal working product for each surface, regular cleaning and waxing treatment not only makes clean, but also permanently protects against dirt and weathering.

EPIFANES Seapower Boat Soap is a cleaning concentrate for all surfaces on the boat. The shampoo does not attack the wax layer, is ph-neutral, biodegradable and economical in use. It can also be used for cleaning 1- and 2-component paint systems, metal rubber and wood. Application: Fill bucket with lukewarm water, then add the soap. For persistant dirt, simply add a little more cleaner and wring out the sponge or cloth outside the bucket (e.g. in a separate container) to avoid contaminating the wash water. EPIFANES-Seapower cleaning agents are long established products, deployed to clean and maintain boats for many years. EPIFANES has the most effective product for every surface - cleaning and wax treatment on a regular basis does not only keep the boat tidy but also protects it permanently against dirt and dilapidation.

EPIFANES Seapower Boat Wax is a liquid sealing hard wax without abrasives based on high quality natural carnauba waxes. It serves as a long-term preservative, fills the pores and gives an excellent, long-lasting shine. Suitable for fibreglass, metals, and all painted and varnished surfaces.Application tip: Apply product first to a cleaning cloth, not to the surface. Allow to dry thoroughly before buffing. For optimum shine, rub in overlapping, circular motions. Change the cloth regularly. Also suitable to protect clear varnished surfaces.Content: 500ml bottleEPIFANES-Seapower cleaning agents are long established products, deployed to clean and maintain boats for many years. EPIFANES has the most effective product for every surface - cleaning and wax treatment on a regular basis does not only keep the boat tidy but also protects it permanently against dirt and dilapidation.