Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
High-strength grade 7 shackle, well suited as an end link for AQUA7 hardened and tempered anchor chain. The slim shape prevents snagging in the anchor roller. The bolt is secured with threadlocking adhesive. High-quality corrosion protection due to COROLIM hot-dip galvanizing. WLL = 1/4 of BRL.
Sturdy boat hook tip made of seawater resistant A4 stainless steel.Together with the TOPLICHT boat hook poles and this boat hook tip, an individual boat hook can be manufactured.
Eye screw made of V4A stainless steel (AISI 316), for wood.
Forerunning chain with short links in ready-made length.The chain complies with DIN 766A. It is made of A4 stainless steel and machine-welded. The breaking load of this chain is 20 to 25 percent higher than the DIN values for grade 3. The forerunner is already provided with enlarged end links at both ends, which allows the anchor and anchor line to be shackled without any problems.
Strong retractable cleat made of A4 stainless steel (AISI 316), polished.Slim, shapely cleat that forms an elegant streamlined body when folded.Fastening via M22 stud bolts.Watertight only after appropriate sealing on board.
Traditional snatchblock with swivel, block housing made of ash wood. Fittings made of stainless steel (AISI316) with a matt blasted surface that gives the impression of hot-dip galvanising. Sheaves made of high-strength, self-lubricating, black ERTACETAL plastic.The bonded and screwed wooden housings are dipped in tung oil (Chinese wood oil) and can be further treated with any oil and 1K paint system. The working load corresponds to max. 1/4 of the specified breaking load (BRL).
Classic brass belaying pin.Functional piece, but also a piece of art for the pin rail of any classic boat:Brass belaying pin, cleanly turned. Polished head.The middle sized pin (190mm) comes from the English firm Davey & Company from Essex.
The father of all anchors.All-round anchor with fixed flukes and collapsible pole.Neatly welded design, hot-dip galvanised.Dimensions, weight and colour may vary depending on the manufacturer and production process.The 100 kg anchor is painted black.
Switch panel for automatic bilge pump. With sound and light alarm when pump is running automtically.With toggle switch, positions: "automatic/off/manual". With control lights and fuse 16 A/12 V. For 12 volt systems.
Switch panel, made of black plastic, for automatic bilge pump. With switch, positions: "auto / off / manual". With control lights and fuse 16A/12V or 8A/24V.For onboard systems of 12 or 24 volts.
Solid brass design for screwing in from the inside.Pins and hinge bolts made of V4A steel, hardened toughened safety glass (up to 8" portholes 8 mm thick, from 10" portholes 10 mm thick), special neoprene rubber seal.The window complies with the CE standard. A CE certificate is available.Standard delivery: sandblasted brass, undrilled.The counter-ring for the window is also available, as is the window with additional sea defences. You will find both further down on this page under "Similar products".
Solid brass design for screwing in from the inside.Pins and hinge bolts made of V4A steel, hardened toughened safety glass (up to 8" portholes 8 mm thick, from 10" portholes 10 mm thick), special neoprene rubber seal.The window complies with the CE standard. A CE certificate is available.Standard delivery: sandblasted brass, undrilled.The window is fitted on the inside with an additional deadlight, which is folded upwards for opening. The deadlight is made of shipbuilding steel, primed and fitted with welded-on hinge parts. A hard rubber seal is inserted into the panel.The window frame can be hinged on the top, right or left. Select your desired combination from the table below.The delivery time for the window with deadlight in your desired combination is 6 to 8 weeks.The counter-ring to the window is also available, as is the window without additional deadlight. You will find both further down on this page under "Similar products".
Counter frame for portlight (Article-No. 1815-...), brass drilled, without screw holes.
For electric impeller pumps.Protects the pump against damage by dry run.The switch is installed on the sucction side of the pump. Cuts the power supply when the pressure drops, caused by a lack of water.Connected to the sucction tube by 1/4" BSP.
Round bronze fixed port, chrome plated. Frame drilled with countersunk fastener holes. Sand-cast bronze, polished on the visible side.The glass is held in place with a ring nut and is sealed with silicone.Not CE-ceritified.
Round brass port with polished or chromed finish. Equipped with hardened glass.The brass pieces are precisely machine cast, the hinges are made of stainless steel and the seal is neoprene rubber.These ports are not only used in boatbuilding, but also in many other areas of interior decoration. A light and inexpensive port with high functionality.Comes completely ready for installation and drilled, with a matching backing ring for the exterior.Such spare parts as seals, turning nuts, etc. are available.These bullseye ports with glass panes are not CE certified. For that, choose the same ports with Plexiglas panes (Article-No. 1740-...).
Light brass design, with a polished or chromed finish.The ports come ready for installation: drilled, with outer ring and sleeve bolts M4 x 16 mm.Glass depth 4 mm.Weight approx. 750 g.Comes with a glass pane.The glass pane version is not CE certified, may be used in certain areas of boatbuilding (not in areas of the boat exposed to the direct brunt of the sea), appropriate for decoration and for interior applications.Also available as CE certified version with PMMA pane.
Cast-iron shaft and middle of the plow. Welded leaves. All hot-dip galvanized.Slight dimension deviations are possible.
With round opening, made from chromed cast bronze.Comes complete with deck flange that can be screwed to the deck (D = 127 mm), as well as deck plate.Painted inside.
Solidly made nav-light boards made from untreated teak, grooved, epoxied, fastened, grafted, and cleanly sanded.Suitable for protecting the lamp and as a glare shield.Compatible with nav-lights PB410, PB420, and AQUA SIGNAL 40. The boards are shipped in pairs (1 x port, 1 x starboard!
Cambered, classic name sign made of teak. The sign is suitable for screwing metal letters, carving letters or engraving.Engraving can be made on request. Please use our inquiry form, which you can find via the link: Do you have any questions concerning this product?. We need the desired article number and the engraving text to process your request.
Teak chock 70 x 30 x 40 mm with integrated rubber ring for securing boat hooks.Comes in pairs with 10 mm bungs.
