Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Slim fairlead made from cast stainless steel (AISI 316).Polished finish.Straight opening for universal mounting.
Strong stainless steel fairlead with two rollers. Made from cast stainless steel (AISI 316, 1.4401).High polished finish.Comes with two stainless fixing bolts.
A strong bollard with angled arms and large mounting plate.Made from brushed stainless steel. Tops of the arms cleanly polished.
Heavy fitting made from polished cast bronze that allows the construction of a boom crutch or a gallows frame.Large design, for inner tube diameter of 39 mm and outer tube diameter of 48 mm. The tubes are not available, the other parts of the set are only available in remaining stock.The corner fitting must be incorporated in a self-made wooden cross beam. The deck fitting anchors the supports on deck and holds them up.The complete gallows frame may be set up of follwing parts:2 x corner fittings (remaining stock available);2 x 5° deck fittings (remaining stock available);2 x 45° deck fittings for the diagonal supports (remaining stock available);2 hinges (remaining stock available);2 pieces brass tube of the desired length for the vertical supports (not available);2 pieces of brass tube for the diagonal supports (not available).
The WING anchor is a combination between plough- and Danforth anchor. It combines good holding with ease of use. It's low center of gravity and self-righting geometry means that the WING anchor grabs quickly and holds well. Welded, galvanized steel.
Robust welded stainless steel construction, industrial polish.The WING anchor is a combination plow and danforth anchor. It unites good setting ability with light handling.Because of its low center of gravity and self-righting design, the WING anchor sets quickly and holds well.
Small HERRESHOFF anchor made of forged bronze.The anchor can be taken apart in a few simple steps and is then extremely easy to stow.The flukes become wide and sharp at their ends for good holding.Comes in a handmade sailcloth bag.
The M-anchor is a replica of the well-known BRUCE anchor, combined with the advantages of plow and danforth anchors.The basic design is based on the anchors employed to secure the oil platforms in the North Sea.This anchor sets quickly and deeply and holds well, even in swells.M-anchors work well in bow rollers.Cast as a single piece, hot-dip galvanized cast steel.
The M-anchor is a replica of the well-known BRUCE anchor, combined with the advantages of plow and danforth anchors.The basic design is based on the anchors employed to secure the oil platforms in the North Sea.This anchor sets quickly and deeply and holds well, even in swells.M-anchors work well in bow rollers.Cast as a single piece, industrial polished stainless steel (AISI 316).
A classic and also handy sized patent anchor for open motor launches and dinghies made from malleable iron.The anchor can easily be split into two parts by sliding out the shaft and fits into any locker seat.Alternatively it can be carried in the hawse pipe.
An inexpensive replica of the well-known BRITANY anchors.Unites all of the benefits of danforth anchors in its complex construction:Best holding on all bottoms for its light weight.Welded construction, hot-dip galvanized.
Preiswerter Leichtgewichtsanker mit guter Haltekraft.Der breite Stock mit Endkugeln verhindert das Verkanten und sorgt für sicheres Eingraben der Flunken.Feuerverzinkte Schweißkonstruktion.
Plastic, with outlet hose (80 cm) and attachable inlet hose (30 cm), Hose diameter 25 mm (1"). Universal pump: as a bilge pump or for for pumping other liquids; gas- and oil-proof.
Opening bullseye with patented stainless steel closure.Stamped and drawn A2 stainless steel-plate window, polished finish.The frame has countersunk holes. Comes complete with matching outside ring.Pane of hardened safety glass, 6 mm.Inexpensive top-quality port. These windows are CE certified (Category A, Areas III and IV). Manufactured in Holland.Fits for various wall depths, because of its flexible backing ring.Also appropriate for interior uses (in doors or decoration).
Tiny folding handle for steering wheels. Varnished teak handle with inox fixing bolt. It fits our STAZO yacht steering wheels with Art.-Nr. 1401- to 1406 but can be adapted to other wheels as well.
Cowl vent made from precision stainless steel A4 with a long oval opening. Shipping with deck flange and screwable deck plate, water-proof with O ring gasket. The very sturdy cowl vent has a high gloss finish and is lacquered in white in the inside.
Bollard made of A4 stainless steel (1.4401), welded, with extra long cross piece. The particularly strong base plate is 5 mm thick and has 13 mm mounting holes. The bollard is ideally suited for marinas.
Functional hook for fastening light fenders and tarpaulins. Pressed from strong brass plates (depth 2 mm), nickel-plated.
Functional hook for fastening light fenders and tarpaulins. Pressed from strong brass plates (depth 2 mm), nickel-plated.
Undrilled flat half-round profile drawn from stainless steel A4 (AISI316), glossy surfaceWell suited for rubbing strakes, stern straps, pubic profile protection.Available in different lengths.
Compact automatic switch for many installation possibilities, even on sloping surfaces with an angle of up to 24°. The switch works reliably and switches on as soon as the water in the bilge reaches a height of about 5 cm. The cover provides extra protection for the float switch, for example against dirt and coarse parts.Housing L x W x H: 133 x 98 x 73 mm. For: 12 - 24 V. Switching capacity: 120 VA max. 12 amps with 12 V.
The WINDEX DINGHY 6 is a compact wind direction indicator for smaller dinghies, dinghies and multihulls. With its small size and lightweight design, it is particularly suitable for boats where there is little space for masthead mounting. The wind indicator is equipped with a precisely balanced wind vane and a low-friction sapphire bearing, which enables a clear display even in light winds.It can be mounted at any height on masts or bowsprits with a diameter of 45-70 mm using a rubber cable bracket. It can be mounted horizontally or vertically and the WINDEX 6 can be removed again very quickly after use.
The rigging cleat, also called a thumb cleat, shoulder cleat or hound is a traditional mast fitting. It is used where the stay is spliced into an eye around the mast and keeps the eye from slipping down. The receiving width is 12mm. Heavy and solid, the fitting is made of cast bronze with a fine matt tumbled surface and has five countersunk holes with a diameter of 5 mm.For an additional charge, the fitting can also be supplied hollowed, i.e. precisely adapted to the required mast diameter. Just ask, we will be happy to advise you.
