Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Light-quality port of brass or chromed brass to be installed from inside.Comes complete with matching outer ring, drilled.With soft-rubber seal.Comes with glass window.Weight: 5 kg.Also available in CE-certified (CE-category A to D, Areas I, III, IV) design with plexiglass (PMMA-Glass).
Heavy square brass deck hatches, with a polished or chromed finish.Comes with fitted safety bars.All parts are made from strong precision-cast brass.The folding frame opens to variable heights employing two hinges that can be operated single handed, and closes to a water-proof and burglar-proof state using two folding locks.Watertight seal of soft sponge rubber.The mounting frame - drilled to a depth of 12 mm - must be lined on decks with camber or sheer.The hatches come with hardened safety glass (depth 5 mm).Square shape with safety bars.Also available with UV-resistant Plexiglas.
Portlights of (ellipsoidal) oval shape. Polished or chromed brass. Installation from outside.The frame for this port is installed in the cabintop from the outside, which gives it a smooth look.A good seal is achieved through the port's adjustable hinge bolts, as well as adjustable snap-in locking knobs.Comes complete with matching backing ring and sleeved screws.Ideally suited to cabintop thicknesses of about 18 mm.
Scratch guard, for example, to protect against abrasive ropes.Made of stamped A4 stainless steel sheet (AISI 316), polished finish.
Polished or chromed brass port, with a mounting depth of 50 mm.Comes ready for installation, with matching sleeve bolts and outer ring.Use: boatbuilding (only in protected areas of the boat, see CE certificate), decoration and interior building - not accredited for the outer hull of a seagoing boat.An inexpensive, but nevertheless functional port!Design with plexiglass (PMMA).CE certificate: category A to D, area III.
Midweight design of brass or chromed brass with Plexiglas. For installation from the inside, with soft rubber sealant. Comes with a backing ring (outer ring). Good seal thanks to adjustable hinge bolts and snap-in, adjustable toggle fastening. These ports have a CE certification (Category A-D, Areas I, III and IV). Thickness of glass: 6 mm,40/50 mm ligament. It's large thickness makes it well suited for all-wood walls.
Portlights of light design, made from polished or chromed brass.These ports come pre-drilled and ready to mount with outer ring and sleeved screws M4 x 16 mm, glass thickness 4 mm.Approximate weight 750 g.Comes with CE-certified Plexiglas (PMMA-glass)(Design Category A-D, Areas I, II, III, IV).Intended for use in boatbuilding (in protected areas of the boat), as decorative pieces and in the cabin.
Small, polished or chromed porthole. Plexiglass design (with CE certification). Comes with sealing ring and concealed screws. Weight approx. 1.7 kg.
Light-quality port of brass or chromed brass to be installed from inside.Comes complete with matching outer ring, drilled.With soft-rubber seal.Weight: 5 kg.CE-certified design (CE-category A to D, Areas I, III, IV) with plexiglass (PMMA-Glass).
Heavy trapezoidal brass deck hatch, with a polished or chromed surface.Comes with fitted safety bars, alternatively without safety bars and with a latch that can be opened from the inside or outside (emergency exit as required by the CE).All pieces are made from strong precision-cast brass.The folding frame opens to variable heights employing two hinges that can be operated single-handed and closes to a water-proof and burglar-proof state using two folding locks.Watertight seal of soft sponge rubber.The mounting frame - drilled to a depth of 12 mm - must be lined on decks with camber or sheer.The hatches come with hardened UV-resistant Plexiglas (CE certified for design categories A to D, Area II), depth 5 mm.Trapezoidal form.Measurments:D1 mm = 400 x 400/352, D2 mm = 435 x435/395, D3 mm = 490 x 490/450 Radius (r) of corners = 85 mm.Also available with hardened safety glass.
Heavy square brass deck hatch, with a polished or chromed surface.Comes with attached safety bars., alternatively without safety bars and with a latch that can be opened from the inside or outside (emergency exit as required by the CE).All pieces are made from strong precision-cast brass.The folding frame opens to variable heights employing two hatch stays that can be operated single-handed.Locking:Hatch with safety bars closes with two fasteners from inside, Â Hatch without bars with locking mechanism to be operated from inside or outside.Watertight seal of soft sponge rubber.The mounting frame -- drilled to a depth of 12mm -- must be lined on decks with camber or sheer.The hatches come with hardened UV-resistant Plexiglas (CE certified for design categories A to D, Area II), 5 mm thick.Square form.Also available with hardened safety glass.
Traditional, compact and heavy-duty single-drop sideboard sword windlass.Robust, open steel construction with heavily dimensioned steel axles in industrial roller bearings, large handwheel with curved spokes, forged capstan head and foot brake with powerful brake band.The main axle of the winch with the wire drum can be disengaged so that the sword can be easily and quickly lowered.All parts are primed twice with rust protection and painted black with industrial paint.For an the winch can also be spray-galvanized before painting as corrosion protection. corrosion protection. Liquid zinc is sprayed onto the sand-covered applied to the sandblasted steel using a spray gun. This thermal process coats the steel with a particularly good particularly durable zinc coating and ensures a smooth surface. Please us about it.Supplied in pairs in mirrored design. The delivery time is at least six weeks.A ball-bearing mounted aluminum twist grip is available as an accessory, as is the crank wheel.
Traditional, compact and heavy-duty hand anchor windlass.Robust, open steel construction with heavily dimensioned steel axles in industrial roller bearings, large handwheel with curved spokes, forged capstan head and foot brake with powerful brake band.The main axle of the winch can be disengaged so that the anchor can be lowered quickly and easily.The cast steel chain wheel is suitable for a DIN 766 chain.All parts are primed twice with rust protection and painted black with industrial paint.For an extra charge, the winch can also be spray-galvanized for corrosion protection before painting. Liquid zinc is applied to the sandblasted steel using a spray gun. This thermal process coats the steel with a particularly durable zinc layer and ensures a smooth surface. Please ask us about it.An aluminum ball-bearing rotary handle is available as an accessory, as is the crank wheel.
Heavy crank wheel with curved spokes, as found on the windlasses of many flat-bottomed ships.The crank wheel is made of untreated cast iron, undrilled and cast-grey. It must therefore be reworked according to your own requirements.We can also supply the crank wheel with a larger diameter (45 cm / 60 cm). Please ask us about this.
Traditional, compact and heavy-duty two-speed manual anchor windlass.Robust, open steel construction with heavily dimensioned steel axles in industrial roller bearings, large handwheel with curved spokes, forged capstan head and foot brake with powerful brake band.The main axle of the winch can be disengaged so that the anchor can be lowered quickly and easily.The cast steel chain wheel is suitable for a DIN 766 chain.All parts are primed twice with rust protection and painted black with industrial paint.For an the winch can also be spray-galvanized before painting as corrosion protection. corrosion protection. Liquid zinc is sprayed onto the sand-covered applied to the sandblasted steel using a spray gun. This thermal process coats the steel with a particularly good particularly durable zinc coating and ensures a smooth surface. Please us about it.A ball-bearing mounted aluminum twist grip is available as an accessory, as is the crank wheel.
Cowl vent made of stainless steel A4 precision casting.Supplied with cover flange and screw cap, watertight thanks to O-ring seal. The vent is extremely stable and particularly corrosion-resistant. The inside is powder-coated white. Round shape made of stainless steel, bronze-coloured (Bz) coated using the TITANTUFF process. No polishing required.
Vent made of A4 stainless steel precision cast with polished surface. The vent is powder-coated white on the inside. The one-piece cast cowl is extremely stable and particularly corrosion-resistant. Supplied complete with deck flange and cover with screw thread and O-ring seal.
Mooring compensator made from seawater-proof and UV-resistant EPDM rubber.Very simple mounting (slides onto the docklines) and good efficacy.Colour: black.
Galvanized swivel for general use, imported from the Far East. The nominal size D corresponds to the recommended chain diameter. Design: eye/eye. Working load limit = 1/5 breaking load (BRL)
Hot dip galvanized swivel shackle, imported from Asia, deviations are possible. The pin diameter is equal to the shackle thickness. Working load limit = 1/5 breaking load (BRL)
Thin cleat, similar to classic Herreshoff cleats.Tapered cleat with flat, oval profile.Polished cast stainless steel.
Sturdy retractable cleat made of A4 stainless steel (AISI 316), polished.Slim, attractive cleat that forms an elegant, streamlined body when folded.Attached using M10 stud bolts. Locked by spring balls in the shaft.Waterproof only after appropriate sealing on board.
A slim designer cleat with slightly curved top.Mounting with bolts.Made from polished A4 stainless steel (AISI 316).
Functional cleat made of polished cast stainless steel (AISI316). The sides are brushed.
