Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
A lightweight rescue and recovery system with a compact pack size for easy use.The rescue net, which forms a tunnel, allows a (unconscious) person in the water to be quickly and easily retrieved and secured without requiring their cooperation. This also works for objects that have fallen overboard or the family dog.The POB-Net is packed like a pop-up tent in a round fabric bag (diameter 700 mm, height 70 mm, with printed step-by-step illustrated instructions) and can thus be stowed away easily. The bag is available in either yellow or white. The bag is also available separately as an accessory (see “Accessories & spare parts”).Before use, the bag is secured to the railing with a carabiner. The net is removed while folded and pops open to its full size when thrown into the water. The rescue net is “pulled over” the person in the water vertically, like a fish trap. Once the net completely encloses the person vertically, it is brought into a horizontal position by pulling on the rescue line. The person being rescued is thereby enclosed as if in a hammock.Hooking the recovery line to the railing (using a carabiner) prevents the person from drifting away from the ship. People weighing up to 120 kg can be hoisted onto the deck in the net (using a recovery device or a halyard), while maintaining the gentle horizontal position.After use, the maintenance-free rescue net is simply rinsed with fresh water and packed back into its bag once dry.
Inexpensive rope from the commercial shipping industry.Built from thin polypropylene (PP) split threads.Splicable, good UV-resistance, floatable. Color: Black, with white indicator lines. Three-strand> construction EN ISO 1346A. Only available in whole coils.Lengths of 110 m. You will find coils of 220 m under "Suitable Items" at the bottom of this page.
Extremely effective protection against rodent pests!The rat plate is a further development of the well-known rat guard used in commercial shipping. The rat plate made of red, very smooth polystyrene hard plastic can be stowed to save space and is very easy to install without tools.The plate is mounted rotatably on the two-part PVC centre piece, which encloses the mooring line. The centre piece is locked magnetically.If the rats try to climb over the locking disc, they will inevitably fall off.Weight: 350gEspecially for use on larger ships, you will find two larger, black versions of the rat plate (Article-No. 2811-036 and 2811-045) further down on this page under "Similar products".
Brass fastener on a plate.Polished or chromed finish, with steel axis brassed or chromed.
Made of polished brass. Simple design with oval base plate.Available as a middle or end post for 20 mm tubing.
Heavy trapezoidal brass deck hatch, with a polished or chromed surface.Comes with fitted safety bars.All pieces are made from strong precision-cast brass.The folding frame opens to variable heights employing two hinges that can be operated single handed, and closes to a water-proof and burglar-proof state using two folding locks.Watertight seal of soft sponge rubber.The mounting frame - drilled to a depth of 12mm - must be lined on decks with camber or sheer.The hatches come with hardened safety glass (depth 5 mm).Trapezoidal form with safety bars. Radius (r) of corners = 85 mm.Weight 9,0 kg.Also available with UV-resistant Plexiglas.
Robust, aesthetically pleasing mooring bitt with cross piece made from polished stainless steel casting (AISI 316). The ground plate comes with boreholes and clean countersinks for mounting.
Flush mount switch.British quality switch, brand name OMEG (former CASTELCO). With flap sockets 6,3 mm.Switches max. 2 Amp.Strong brass handle and plastic body. Surface brass polished or nickel plated.
Small two-part latch with secured wing nut and backing plate. Polished or chrome plated brass.
INTERNATIONAL lifebuoy made of orange-red PE hard plastic. The ring is particularly hard-wearing and weather-resistant. It is equipped with four all-round reflective strips and an all-round grab line.This 4 kg rescue ring is intended for use with a MOB light-smoke signal.Labeling with adhesive letters is possible (see accessories).The lifebuoy has CE and MED approval (certificates under "Downloads").The ring is also available in a lighter (2.5 kg) version (see "Similar products").Technical features:Maximum discharge height: 80 mOuter diameter: 73 cmInner diameter: 44 cmWeight: 4 kg
Solid tanks of thick-walled PE plastic (polyethylene), usable as a drinking water tank, white / half transparent.The tanks have several 1/2‘ and 1 1/4’ internal threads integrated into the body at both ends, offering variable connection options for filling and emptying. There is a 3/8’ internal thread on the top for connecting a tank vent. These threads can be individually pierced by the customer.A non-projecting inspection cover is placed on the top enabling a space-saving installation. The fill level can be determined from the outside.
ISOFLOCK sound insulation made of granulate in three thicknesses for insulating the engine compartment, depending on the space available. It is supplied in sheets (1 x 0.5 m) which are laminated with aluminum foil on one side to prevent the insulation from getting dirty so quickly when working on the engine or in the event of diesel or oil leaks. The reverse side is self-adhesive. This means that the panel can be easily cut to size and adjusted. The backing film is then removed and glued down.Density/weight 100 kg/m3. The material is flame-retardant in accordance with ISO 9094-1 and 2 and is therefore suitable for the engine compartment. Cut and joint edges, as well as the open foam sides of the panels, should be sealed with aluminium tape art. no. 2761-150 to minimize sound bridges and soiling.Toplicht tip:When cutting the panels to size, mark the aluminum side with a felt-tip pen. First make cuts only up to the adhesive layer through the material, once it is finished, then fold it over and trim it. Then cut through the sticky layer with another cutting tool. If you cut through both layers at once, the blade often sticks and the cut through the insulation material can become irregular. Match the panel joints as precisely as possible, even around fixtures in the boat. Larger gaps create sound bridges, which can significantly impair the insulation result. Then seal the joints of the panels and the open cut edges with aluminum adhesive tape.
Classic wooden belaying pin from ash wood.Cleanly turned pin in traditional form.Untreated.
Flange and cover with O-ring seal.Polished A4 stainless steel finish.A spring clip key for opening and closing is available as an accessory.
Marine light bulbs without BSH certification. Fits the BaY15D socket used in navigation lights (bayonet).Version with 30 high-power LEDs (3255-103):DimmablePower consumption: 3 wattsLuminous flux: 350 lmLight color: 3000KCRI: >80Multi-voltage compatible: 10–30 volts DCBase: BaY15dTotal length: approx. 47 mmLength without base: approx. 27 mmBase length: approx. 20 mmDiameter: approx. 22 mmRated service life: 50,000 hTube-shaped version (3255-104):DimmablePower consumption: 3.2 wattsLuminous flux: 380 lmLight color: 2,700 KCRI: >80Multi-voltage compatible: 10–30 volts DCBase: BaY15dTotal length: approx. 57 mmLength without base: approx. 37 mmBase length: approx. 20 mmDiameter: approx. 16.5 mmRated service life: 25,000 h
Push-button catch. Clean smooth works with round front plate.For door thicknesses up to 32 mm.Polished or chromed brass.
Battery-powered hot cutter with cutting tip for cordage for cutting and welding synthetic fibre cordage. Suitable for continuous operation, with active ventilation, temperature at the cutting tip up to 400°C.Replaceable Longlife 18 V / 2.0 AH Li-Ion battery.Weight: 780 g.Supplied with practical carrying case and battery charger.Ideal for working on board and in the rig.Spare tips can be found under matching articles.
Ships bell made from brass with wall bracket. The bell is manufactured in the traditional casting method and has a high gloss finish.The wall bracket is supplied with a mounting wedge: only this piece is screwed on. Thus the bell can simply be dismounted from the wedge and put away.These bells are die-cast from brass and therefore have a clear, high sound. The bell with diameter 300 mm is RINA approved as signal bell of ships over 20 m with carriage requirements. Shipment: bell, bracket, mounting wedge. Available with polished or chromed finish.
Heavy-duty bracket made of seawater-resistant light metal, rivet construction. The lifebuoy holder is suitable for all lifebuoys with a diameter of 75 cm (INTERNATIONAL type).The bracket is suitable for wall mounting. A 3-piece clamp set for tubes from 15 mm to 22 mm is available for mounting on the railing.Weight: 1.06 kg
INTERNATIONAL lifebuoy made of orange-red PE hard plastic. The ring is particularly hard-wearing and weather-resistant. It is fitted with two reflective strips in four positions on the front and back of the ring and has an all-round grab line.Labeling with adhesive letters is possible (see "Accessories & spare parts").The lifebuoy has CE and MED approval (certificate under "Downloads") and complies with DIN EN14144.The ring is also available in a heavier (4 kg) version, which can be supplemented with a MOB light-smoke signal (see "Related articles").Technical features:Maximum discharge height: 80 mOuter diameter: 73 cmInner diameter: 44 cmWeight: 2.5 kg
The heavy duty greaser is made from steel (the screw-on cap is from brass).Base plate 97x97mm. The shaft and cylinder (diameter 80mm) are steel.A lead-out for the brass compression fitting is prepared.There are two sizes available: a litre and a 1/2 litre version.
Roomy thermal protective suit made of light foil in mummy form with front zipper, as full body protection to reduce cooling. Protects against rain, wind and cold in an emergency and is also suitable for preventing heat loss in accident victims. This thermal protection aid is part of the survival equipment for lifeboats and liferafts.MED-/SOLAS approved thermal protective aid (TPA) according to IMO Resolution MSC.81 (70).Due to the vacuum packaging the pack size is very small. The suit weights only 250 g.Colour: silver.Size: 200 x 100 cm.For body size: 145 to 200 cm.
