Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Solid deck plate/deck tang for the forestay made from seawater resistant cast bronze.Pentagonal, with 4 fastening holes.Stud with 2 bores (for forestay and staysail tack).Surface: tumbled with matt finish.
Holder for ship's and fog bells. Made from sand-cast brass. Finish either rolled and polished (unlacquered) or chromed.The "A" measurement should be at least 0.6 x the bell's diameter.
Made from Oregon pine, with two coats of spar varnish applied, top knob made from mahogany.With a cleat to secure the pennant halyard (0.40 m and 0.50 m length with screw-in loop).
All TOPLICHT lifebuoys can be custom-labeled with the ship’s name, home port, or other text. For the lettering, a special weather-resistant black film is applied using a hot-air application process. We use the traditional HELVETICA font in uppercase letters.Important information for the ordering process:The base price for lettering includes 30 letters .A lifebuoy must be ordered separately ( see related items).Please enter the desired text in the“Add Comments” field when completing your order.Please also specify whether the text should be placed “top” or “bottom” on the ring.The lettering is applied to one side. If you want the ring printed on both sides, the lettering must be ordered separately for each side.Each item is custom-made, so please allow approximately 10 days for processing.Other fonts, colors, or even a custom logo are possible; we’d be happy to provide a quote for these options.
Very stable, yet lightweight telescopic boat hook.The thick-walled tubes made of anodised marine aluminium are fixed at any point by simply turning them.With unbreakable tip made of blue plastic and a hook made of black, non-slip two-component technopolymer.Under the orange rubber cap is a thread to which a suitable scrubber can be mounted, e.g. Article-No. 1221-162.The boat hook is floatable.Note: Please note that increased shipping costs apply for items over 1.10 m in length.
Tool for splicing wire rope, used by fishermen and riggers. Forged from special steel.Built wide and flat, with a tempered point.Hardened finish and untempered head, which can be hit with a hammer to separate difficult-to-splice wires.
Curved abutting face.Polished stainless steel, sea water proof, A4, 1.4401 = AISI 316.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
Washers of high-strength corrosion-resistant silicone bronze. Suitable for our UNC nuts and bolts.
Fender basket made of polished stainless steel wire (4.5 mm) suitable for POLYFORM long fenders (F series).Mounting:The twistable connector B (item no. 1846-212) made of white polyamide allows attachment to railing tubes with a diameter between 22-30 mm. Two connectors are recommended, one at the top and one at the bottom. For connection of additional baskets a parallel connector C (article no. 1846-210) is required. The connectors come with matching stainless steel screws, only a screwdriver is needed for assembly. Supplied is one fender basket, the connectors are not included with the fender basket and must be ordered separately.
Traditional weight anchor which nicely fits in the hawsehole.Beautiful shape, massive shaft.Made from cast steel.Up to 75kg, hot-dip galvanized; 100kg and up, only available in black.Dimensions and weight may vary based on manufacturing conditions.Other sizes available on request.
This maintenance-free suction fan, which is powered by the wind according to the Flettner principle, achieves a very high air flow rate. It is rainproof and smooth running. Proven for over 35 years!Construction of aluminum sheet (1 mm thick) with stainless steel axle and two dust-proof, smooth-running ball bearings.The ventilation capacity is specified for a wind speed of 4.5 m/sec.An stick-on flange for flat roofs must be ordered separately.On request, this ventilator is also available with pipe sockets 125 mm or 200 mm.
The classic! The best known and widest used building technique for cam cleats. Simply built. Riveted design. Made entirely from seawater-resistant composite materials and stainless steel.The cleat jaws have very strong dentition and stainless steel springs.With stainless steel fairlead.
Drilled and countersunk: Ready-to-install flat half-round profile made of stainless steel A4 (AISI316), drawn, glossy finishOnly available in whole lengths of 3.00 m.Please always order a quantity divisible by 3.Whole lengths are bulky goods or forwarding goods. Increased transportation costs will be incurred.
An original idea from Denmark: the patented red-green turning sign, which can be used to indicate to guests whether and for how long the berth is free. The sign can be folded down using the boat hook.A date can be entered on the additional DATO CLIP sign (must be ordered separately) using a felt-tip pen.Available with angled or flat fitting.
Three-part clothes hook.Brass, polished or chromed finish.Practical pivoting hook.
Quality English rigging knife with specially hardened, rust-free blade and brass-riveted handle of polished rosewood.The straight edge of the short blade (L2 = 95 mm) is particularly well suited to cutting rope. Comes in a durable leather sheath.Also comes with strong, forged stainless steel marlin spike (L = 185 mm) with a groove in the shaft for splicing wire. The head is also a practical shackle-opener.
Watertight electrical connections for yachts, made of brass, chrome plated.Mounting double phase socket with black plastic cover. The plug is strain relieved through a union nut and watertight cord entry.
Piano hinge made of stainless steel (V2A). Undrilled, commercial pitch 15 mm. The mandrel (mandrel = axis = 1.75 mm) of the piano hinge is also made of stainless steel.Available in different lengths.
Functional, flat stainless steel vent with strong bell-shaped cover and glued-in rubber seal. The deck part is made of 0.8 mm thick stainless steel sheet. A stainless steel mosquito net is integrated into the bottom part.A plastic cover conceals the deck opening from the inside (installation height 25 mm) and is also available as a spare part.The fan can be closed watertight from the outside by turning the cover or from the inside by turning the hand wheel.This vent is well suited for installation in a Dorade box.
The drogue is made from sturdy Nylon with good tensile strength. A solid plastic ring is incorporated at the end of the air sleeve, mostly preventing it from getting caught and prolonging the life span. It is in use at air ports, bridges, yacht harbours, cable railways, etc. The windsock is envisaged for use with an air sleeve cage, which must be ordered separately. Colour: red white.
The corpus of the magnetic door stay is made from grey plastic with a concealed mounting plate, the pole shoes and counter plate made from steel are corrosion-resistant.Mounting the door stay on the wall is simple, the plastic body is long lasting, low-maintenance and without interfering catches and sharp angles.
Accessories and replacement parts for LAVAC ZENITH onboard toilets:We have even more replacement parts in stock.
Stainless-steel continuous fan.Under the cover sits a mushroom vent that can be closed from inside to form a watertight seal. With mosquito screen and plastic counterflange for inside.Perfect drainage.
