Heavy duty greaser | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Art. No.	description	contents (l)	D (mm)	H1 (mm)	H2 (mm)	for	Price (unit)	Delivery time	Note list	Buy

Description

The heavy duty greaser is made from steel (the screw-on cap is from brass).
Base plate 97x97mm. The shaft and cylinder (diameter 80mm) are steel.
A lead-out for the brass compression fitting is prepared.

There are two sizes available: a litre and a 1/2 litre version.

Questions about the product?

Talk to craftsmen, boat builders and sailors. We understand your questions and provide the right answers.

Contact experts

Brass pipe-to-hose fitting

Brass pipe-to-hose fitting

Brass pipe-to-hose fitting with external thread and hexagon. Available for different hose diameters.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes and do not indicate the thread diameter.

From €3.20 *

Fuel hose

Nitrile rubber fuel hose for use with diesel or petrol, with outer textile covering.Applicable as pressure or suction hose.

From €7.90 *

More Products from Category Grease, lubricants & grease pumps

Brass greaser

Made entirely of brass, angled base plate 80 x 72 mm for either side or floor mounting, plunger with O-ring seal. Attachment: Pipe thread 1/8" BSP, plunger dimater 44 mm.

€74.51 *

FLUID FILM GEL BN Corrosion protection

FLUID FILM GEL BN Corrosion protection

Solvent-free, soft coating material based on lanolin (wool fat). FLUID FILM Gel BN is a physiologically safe and environmentally friendly corrosion protection agent. It serves as a single-layer long-term protective coating for ships, docks, offshore units, and similar objects when surface preparation is limited to high-pressure washing. The viscous gel can be used as a lubricant for machines, equipment, winches, and for wire rope preservation. The product offers excellent corrosion protection, lasting up to 20 years in enclosed spaces. It penetrates residual rust, and promotes the self-healing effect in case of damage to existing coatings. FLUID FILM Gel BN is temperature stable from -45 °C to +70 °C. Complies with MIL-Spec C-23050 guidelines. Preparation: Loose components, dirt, rust, and standing water must be removed before application. Surfaces must be dry.Application: FLUID FILM Gel BN can be applied using a brush, roller, spatula, or airless spray. The greater the layer thickness, the better the corrosion protection. Due to its gel-like consistency, thicker layers up to 1000 µm can be applied. The material can be used directly from the container. For areas with strong water turbulence, it is recommended to subsequently apply an additional layer of PERMA FILM (Art.No. 2718-501). Technical DataApplication area: Long-term protection for ballast tanks, voids, offshore structures, and metal partsSubstrate: Clean, dry, free from loose components; high-pressure cleaning recommendedLayer thickness: 600–1000 µm (airless spraying), 80 µm (brush/roller)Coverage: approx. 1.6 m²/l (at 600 µm), approx. 12 m²/l (at 80 µm)Application temperature: -10 °C to +40 °CApplication methods: Brush, roller, spatula, airless sprayingColor: Transparent (Gel BN)Temperature resistance: -45 °C to +70 °CFurther information on application can be found in the Technical Data Sheet under 'Downloads'.

From €30.90 *

FLUID FILM LIQUID A Lanolin Corrosion Protection

FLUID FILM LIQUID A Lanolin Corrosion Protection

FLUID FILM LIQUID A is a transparent, solvent-free, oil-based corrosion protection based on lanolin (wool grease) for soft coating of steel surfaces in above and underwater areas.The product displaces water, penetrates existing rust, and forms an elastic, adhesive protective film. It was originally intended for flooding repair-needed ballast water tanks on ships, floating docks, offshore units, for flooding coating of cavities, ballast water tanks, offshore structures, and hard-to-reach areas. The protective film lasts up to two years in enclosed cavities. Additionally, it is suitable for loosening seized rust or making rusted metal parts movable. Application on damp or slightly corroded surfaces is also possible.The product contains no solvents, is environmentally friendly, and easy to apply. Available as spray (type AS-R), in cans or containers (for dipping, spraying, or brushing).Application: Application is carried out depending on the area of use by flooding, brushing, rolling, or spraying. The material should be homogenized before use. After application, the gel time when flooding is about 3–4 hours. Application is possible at any temperature. Ensure adequate ventilation and personal protective equipment.Technical DataField of application: Single-layer corrosion protection on steel surfacesSubstrate: Steel (bare, rusty or damp); no special pretreatment necessaryPrimer: not requiredCoverage: approx. 12 m²/l at 80 µm wet film (roller, brush application)Thinning: not necessaryApplication method: Brush, roller, spraygun, flooding (professional users)Drying times: none; forms a non-drying, oily protective filmFor more information on application, refer to the technical data sheet under 'Downloads'.

From €29.90 *

Grease hand press

Grease hand press

High-quality hand lever grease gun made to industry standards.The housing is made of powder coated steelPrecision made pump tube with an output of 1,6 ml per stroke and 400 bar counter pressure.Suitable for 400 ml grease cartridge or manual filling. connection thread M10x1.Accessories:angulated nozzle pipeand high pressure rubber reinforced hose with self-clamping 4-jaw couplers.

€41.50 *

Grease spray TOP 2000

Grease spray TOP 2000

Soft, adhesive special grease with good seawater and fulling resistance as well as excellent pressure absorption capacity. Not resinous.

€19.94 *

Heavy duty greaser

Heavy duty greaser

The heavy duty greaser is made from steel (the screw-on cap is from brass).Base plate 97x97mm. The shaft and cylinder (diameter 80mm) are steel.A lead-out for the brass compression fitting is prepared.There are two sizes available: a litre and a 1/2 litre version.

From €149.00 *

LIQUI MOLY Marine Multi Spray

LIQUI MOLY Marine Multi Spray

Universal marine grease for the many lubricating points on board, water-repellent, saltwater resistant and stable to ageing and liquefying.

€14.90 *

Marine grease LIQUI MOLY

Marine grease LIQUI MOLY

Universal marine grease for the many lubricating points on board, water-repellent, saltwater resistant and stable to ageing and liquefying.

€12.95 *

Multipurpose / bearing Grease

Multipurpose / bearing Grease

The water- and pressure-resistant multi-purpose grease ensures optimum long-term lubrication and protects against corrosion and abrasion.

€6.95 *

Multipurpose grease

Multipurpose grease

Calcium saponified grease according to DIN 51502, type KP2G-30 with EP (high pressure) additives and therefore suitable for use under high pressure and vibration.We recommend the grease as sterntube grease and water-resistant universal grease. The 400 ml cartridge size is also ideal for lubricating folding and rotary blade propellers using a grease gun via grease nipples.Specifications:extremely water-resistantvery good adhesion with a long-lasting lubricating film,long lubrication intervals due to very good ageing resistance,good fulling penetration (NLGI class 2)can be used at -30° to 120° C,The 400 g cartridge fits into standard grease guns.

From €13.90 *

OWATROL TRANSYL Rust Remover

OWATROL TRANSYL Rust Remover

Highly penetrating, acid-free universal oil in a practical spray bottle for precise dosing.OWATROL TRANSYL is an excellent screw remover, displaces moisture, breaks down rust and prevents new rust formation. A good lubricant that does not attack substrates such as metals, plastics and paints.Application: Shake spray thoroughly before use. Do not spray on hot surfaces. Cover adjacent areas. Spray the product onto the areas to be treated, either selectively or over the entire surface &nbspTechnical DataApplication area: Metal connections, bolts, hinges, bearings, guidesSubstrate: rusty or bare metal, plastics, paintApplication: spray canCoverage: depends on usage (spot or area-wide)Thinner: noneApplication temperature: –30 °C to +50 °CDrying (20 °C): very slow evaporation, leaves lasting lubricating filmFurther information on application can be found in the Technical Data Sheet under "Downloads".

€19.90 *

Seacock grease

Grease for sea cocks.

€35.50 *

Technical grease

Technical grease

All-purpose grease for the lubrication of face-to-face joints.The Vaseline is water-repellent (hydrophobic) and provides as such a perfect protection against corrosion.Free of natural resins and acids.

€4.95 *

TIKAL TIKAL TEF-GEL Anticorrosion paste

TIKAL TIKAL TEF-GEL Anticorrosion paste

Seawater proof and non-toxic insulating lubricant on the basis of a PTFE similar to Teflon.The paste protects from galvanic corrosion between different precious metals, like for example with threaded joints between stainless steel and aluminium and thereby stops the blossoming of the aluminium.Also, as a lubricant, it keeps screws and turnbuckles permanently serviceable.

From €13.90 *

Winch grease

Soft, adhesive special grease with good saltwater and walk resistance, as well as high pressure absorbtion properties.Won't harden.

From €12.90 *

Last seen products

Request sent successfully

Request wasn't send - a error occured. Please try again.