Go to homepage
€0.00*
Categories
Jobs
Catalogue
Quick order
Filter products now
from 8 € to 125 €
Filter products now

Manufacturer Navigation

Our brands from A-Z

Show all

Products from Yachtcare

YACHTCARE is a brand of VOSSCHEMIE GmbH based in Uetersen, Germany. The product range for boat repair, maintenance and care was consolidated under the brand name YACHTCARE in 2001. VOSSCHEMIE has existed since 1955 and develops and produces products in Germany based on polyester, polyurethane and epoxy as well as suitable reinforcement materials and additives. YACHTCARE addresses boatyards, service companies and owners with solutions for repairs, restorations and care.

42 products
Epoxy Joint Paste Black 500g YACHTCARE
Epoxy Joint Paste Black 500g YACHTCARE
YACHTCARE EPOXY JOINT PASTE is a 2-component, viscous epoxy paste for bonding teak deck joints. This product offers the possibility of re-grouting an existing wooden deck and at the same time repairing defective bonding to the substrate. There should still be at least 5mm of teak covering. The flank adhesion on a clean teak substrate is excellent, the material is permanently flexible. Mixing ratio 2:1

€39.90 *
Details
LEAK HERO mastic leak sealant YACHTCARE
LEAK HERO mastic leak sealant YACHTCARE
LEAK HERO is a mastic sealant for closing leaks in case of emergency.The wax-like material comes in a plastic container and is ready for use. It is easily applied to or stuffed into the leak directly from the container.Sticks strongly to most surfaces, also in wet surrounding and under water.Perfect material to stop water leaking into holes in the hull, plank seams, faulty through-hulls ...Should be carried in each emergency toolbox on board.Only for emergencies! Later the leak must be repaired professionally. - Closes a leakage in seconds - Cures leaks in case of emergency - Easy to use - ready for use - Sticks to wet surfaces.For each container sold 1 Euro is donated to German Lifeboat Association (DGzRS).Container with 625 ml.

€35.50 *
Details
YACHTCARE SEALING TAPE
YACHTCARE SEALING TAPE
This butyl rubber sealing tape is an alternative to sealing compounds from tubes. It is used for airtight, dustproof and watertight sealing of overlapping joints, screw connections, joints, seams, rebates or small holes. It can also be used as a relining or vibration and noise damper ("rattle protection").YACHTCARE SEALING TAPE is self-adhesive on many substrates and has excellent adhesive strength. It remains permanently plastic and does not harden.Application: The surface should be dry and free of dust and grease. Cut the tape to the desired length and press it onto the prepared surface with even pressure, then remove the protective film and proceed with installation. When applying to screws and bolts, the tape is wrapped around the thread and then screwed in. Any excess material can be removed with a cutter knife. Colour: light greyDimensions per roll (WxL) 18 mm x 3 m

€15.90 *
Details
YACHTCARE SEALING TAPE
YACHTCARE SEALING TAPE
YACHTCARE SEALING TAPE
YACHTCARE EPOXY PRIMER
YACHTCARE EPOXY PRIMER
Universally applicable and economical two-component epoxy-based primer for all boat-building materials (except hard-working solid wood).The YACHTCARE epoxy primer is diffusion-tight with the appropriate layer thickness (6 layers) and is ideal as an osmosis protection coating on GRP yachts and as corrosion protection on steel and aluminum. It also has excellent adhesion properties on aluminum.The primer can be painted over with all antifoulings and paint systems.Technical dataSubstrates: GRP, rigid wood, steel, aluminumPre-treatment: The substrate must be clean, dry and free of grease. All incompatible old coatings (1-component systems, antifoulings etc.) must be completely removed before applying the primerApplication: Apply in dry weather and at temperatures between 10°C and 30°C. Number of coats for new construction: 2-3, for better corrosion and osmosis protection at least 6 coats are better.

From €29.90 *
Details
YACHTCARE BOAT WAX
YACHTCARE BOAT WAX
BOAT WAX is a very productive hard wax of highest quality that can be easily applied and polished. It's a matter of a solid, watertight emulsion of wax and silicone, based in Brazilian carnauba wax.The polish yields and extraordinarily long-lasting and hard, mirror-like finish, as a long-term protectant against oxidation and saltwater damage.The built-in UV filter minimizes yellowing.As a surface protectant (wax sealant) for gelcoat and deck surfaces above the waterline on plastic boats, patio furniture and other plastic surfaces.Coverage: approx. 20 sq.m./bottle (200 g).

€26.95 *
Details
YACHTCARE Gelcoat Repair Kit VT
YACHTCARE Gelcoat Repair Kit VT
GELCOAT REPAIR KIT VT is used to repair minor gelcoat damage above and below the waterline. In the case of fine layer cracks, deep scratches and small breakouts in the outer skin of a GRP hull, the underlying laminate must be protected against water ingress with gelcoat. Water or moisture ingress would damage the strength of the laminate in the long term. The set consists of 180g water-resistant gelcoat, 20g CHP hardener, sandpaper, adhesive tape, filler, self-separating film and detailed instructions.

From €31.95 *
Details
YACHTCARE Gelcoat Repair Kit VT
YACHTCARE Gelcoat Repair Kit VT
YACHTCARE EPOXY-BK fast epoxy
YACHTCARE EPOXY-BK fast epoxy
EPOXY - BK is a solvent-free, thin-flowing, transparent protectant, laminating and grouting resin. It can be used as a binder for fillers (for example, lightweight fillers). YC EPOXY- BK hardens to a nonstick surface and can also be used for components and the protection of fiberglass, carbon fiber and aramids. Use conforms to the basis weight of the reinforcing ply.For protecting porous and flat surfaces. As impregnating resin for coatings and mouldings in fiber-reinforced shapes. As casting compound for circuitry and other hollows to 3 cm. Coverage/Requirement: for example, 0.9 kg/m.sq. for 300 g of fiberglass matt; 1.2 kg/m.sq. for 450 g of fiberglass matt; Coating in pure form: 250 g/m.sq.

€32.90 *
Details
YACHTCARE ANTIFOULING ACTION Hard Antifouling
YACHTCARE ANTIFOULING ACTION Hard Antifouling
YACHTCARE ANTIFOULING ACTION is an economical and effective hard antifouling with copper compounds as the active ingredient and an insoluble binder. This provides very good fouling protection especially for fast motorboats, trailer boats, and boats that dry out in tidal flats. Developed for Northern European inland and coastal waters. It can be used on all primed surfaces and boat materials except aluminum.Technical DataApplication area: For all Northern European inland and coastal waters with moderate fouling pressure; not recommended for warm watersBoat type: For sailing and motorboats, especially suitable for fast motorboats, trailer boats, and boats in dry marinasSubstrate: GRP, steel, wood; not on aluminumPrimer: YACHTCARE Epoxy Primer (Art.No. 2520-014) or YACHTCARE Antifouling Primer (Art.No. 2520-012)Coverage: approx. 13 m²/lThinner: YACHTCARE ANTIFOULING THINNER (Art.No. 2520-009), (5–10% optional)Application method: Brush, mohair rollerDrying times: Recoatable after 6 hrs at 20 °CPot life (time between painting and launching): 24 hrs to 6 months

From €36.95 *
Details
YACHTCARE ANTIFOULING ACTION Hard Antifouling
YACHTCARE ANTIFOULING ACTION Hard Antifouling
YACHTCARE ANTIFOULING ACTION Hard Antifouling
Epoxy fine filler YACHTCARE
Epoxy fine filler YACHTCARE
YACHTCARE EPOXY FEINSPACHTEL is a quick-drying 2-component epoxy filler with the highest surface quality. The thixotropic fine filler, which is particularly easy to sand, produces a surface with very low pore volume. It is used for the fine processing of surfaces from painting, as well as for the reconditioning and covering of various materials in above and below water areas. YACHTCARE EPOXY FEINSPACHTEL is solvent-free and is characterised by its high water resistance and good sanding properties. Area of application: Universal for all imaginable fine filling work above and below water. Suitable for boat building materials such as GFK, CFK, steel, aluminium and non-working wood. GRP, steel and aluminium substrates must be primed with a 2-component epoxy primer such as EPOXY PRIMER. Colour: cream white.

€39.90 *
Details
YACHTCARE TEAK-OIL 3
YACHTCARE TEAK-OIL 3
Description Yachtcare Teak Oil 3 is an air-drying natural oil for the protection and care of teak wood. Thanks to its excellent penetration properties, it protects the wood exposed to weathering from the inside. It is particularly well suited for use on teak outdoor use. Teak Oil 3 penetrates completely into the wood and protects it effectively against moisture and weather conditions. It also contains UV protection and slows down greying. The oil does not form a layer on the surface and the non-slip safety especially on treads on board is retained.  Consumption: approx. 100 – 200 ml/m², depending on the wood.

€26.91 *
Details
YACHTCARE SUPER-EPOXY
YACHTCARE SUPER-EPOXY
A solvent-free, 2-part multipurpose adhesive that develops a very strong bond in a short time (10 to 15 minutes). SUPER EPOXY is intended for bonding such various boatbuilding materials as wood, metal, fiberglass and hard rubber. The epoxy resists water and oil. Long-term temperature resistance to 100°C. Color: transparent. Mixture ratio 1:1 based on volume. For high-load, transparent adhesion, it can be carefully positioned and applied and in a short time produce a high-strength bond. For use with wood, metal, GRP, cement, porcelain, glass, leather and hard rubber.

€11.95 *
Details
YACHTCARE gelcoat refinish fine
YACHTCARE gelcoat refinish fine
Fine polish for polishing less heavily chalked and faded or beforehand with coarse refinish treated gel coat surfaces to high gloss.Applicable also for hard lacquer surfaces. Processing by hand or machine.Finally the surface should be sealed with YACHTCARE BOAT WAX or REFINISH PREMIUM GLOSS.

€26.95 *
Details
YACHTCARE ANTIFOULING SP Self Polishing Antifouling
YACHTCARE ANTIFOULING SP Self Polishing Antifouling
Reliable, self-polishing antifouling with copper compounds and organic, bioactive substances for northern European coastal and inland waters. Thanks to the self-eroding surface, the bioactive substances can always develop their optimum effect over the entire service life of the coating and it does not need to be sanded before a new coat is applied. Cannot be applied to Teflon-based coatings.YACHTCARE ANTIFOULING SP is compatible with most antifouling systems and is suitable for all boat types and boat building materials except aluminum. Technical dataArea of application: Waters with medium to heavy foulingBoat type: Motor and sailing boats with medium speedSubstrate (with appropriate primer): all materials except aluminum, check existing coatings for compatibility before applicationCoverage: approx. 12.7 m²/lDilution: YACHTCARE ANTIFOULING THINNERApplication method: Brush, roller, spraying (professional use only)Drying times at 20°C: Recoatable: after approx. 6 hoursFurther information on processing can be found in the technical data sheet under “Downloads”. 

From €34.50 *
Details
YACHTCARE gelcoat REFINISH 1
YACHTCARE gelcoat REFINISH 1
Abrasive, universally employable sanding and polishing paste, where the granulation of the rubbing compound is refined autonomously during the polishing process.Thereby a heavily weathered, matt or faded surface can be refurbished from rough cleaning to high gloss in one work step.The polishing paste is free of silicone and is suited for manual and mechanical usage on lacquer, metallic and gel coat surfaces.

€15.95 *
Details
YACHTCARE ANTIFOULING PRIMER
YACHTCARE ANTIFOULING PRIMER
YACHTCARE Antifouling Primer is an elastic, one-component primer for underwater hull coating on GRP, metal and wood.The metal particles contained in the primer form a mesh of scales, which provides high-quality protection against penetrating moisture. It is also suitable as a barrier primer and adhesion promoter when changing antifouling. The antifouling primer serves as a base for all commercially available hard and self-polishing antifoulings, but not for antifoulings that contain metallic copper, such as PTFE thin-layer antifouling.Technical dataSubstrates: GRP, wood, steel, aluminum, existing commercially available antifoulingsPre-treatment: The substrate must be clean, dry and free of grease. All loose components or damaged old coatings must be removed beforehand. The substrate must be sanded.Application: Apply in dry weather and at temperatures between 0°C and +30°C. Do not apply in direct sunlight. Do not apply in direct sunlight. When reapplying the primer as a moisture barrier on the substrate, we recommend applying 4-5 coats. We recommend 1-2 coats as a barrier primer when replacing antifouling.Follow-up coat: all common antifoulings except thin-layer antifoulingsCoverage: approx. 10 m²/lDilution: Not recommendedApplication method: Brush, fur rollerDrying times at 20°C: Can be painted over with itself: after approx. 4-6 hours, can be painted over with antifouling: after approx. 6 hoursFurther information on application can be found in the technical data sheet under “Downloads”. 

From €26.91 *
Details
YACHTCARE BOAT POLISH
YACHTCARE BOAT POLISH
BOAT POLISH is a liquid, universal abrasive for lightly oxidized polyester or polyurethane surfaces (silicone-free).BOAT POLISH cleans gelcoat and painted surfaces to the pores and achieves a new surface gloss.The polish can be applied by hand or with a polishing machine.For cleaning slightly dirty and weathered surfaces, as well as for polished and synthetic surfaces. In order to seal substantial surfaces, polish with a coat of YC BOAT. Coverage: approx. 33 sq.m./l.

€17.95 *
Details
YACHTCARE ANTI GILB cleaner
YACHTCARE ANTI GILB cleaner
A thick-flowing, aqueous gel for the care and cleaning of weathered and yellowed gelcoat, plastic and painted surfaces.ANTIGILB effortlessly removes the typical "yellow waves" on the bow and transom waterline areas. The original color is brought back through the use of this product.For removing and cleaning the yellowing and bleaching that are characteristic on the bow, waterline and transom of boats.Finishing with a sustainable and lasting surface sealant, for example, YC BOAT WAX, is recommended.

€16.95 *
Details
YACHTCARE polishing pad
YACHTCARE polishing pad
LAMBSWOOL POLISHER with Velcro back for optimal polishing of plastic and painted surfaces. Dimensions: D x H: 133 x 22 mm.

€24.00 *
Details
VOSSCHEMIE Polyurethane-Thinner
VOSSCHEMIE Polyurethane-Thinner
PU special thinner for G4/G8 polyurethane resin.

€23.90 *
Details
YACHTCARE Antifouling Thinner
YACHTCARE Antifouling Thinner
Spezialverdünner für YACHTCARE Antifoulings. Entwickelt zur Einstellung der Verarbeitungsviskosität und zur Reinigung von Werkzeugen nach der Verarbeitung.Anwendung: Nur für YACHTCARE Antifouling-Produkte verwenden. Dem Anstrichmaterial in kleinen Mengen zugeben, bis die gewünschte Viskosität erreicht ist. Nicht überdosieren, da dies die Schichtdicke und Trocknung beeinflussen kann. Auch geeignet zum Reinigen von Pinseln, Rollen und Spritzgeräten. Sicherheits- und Verarbeitungshinweise auf Gebinde und Sicherheitsdatenblatt beachten.Technische DatenAnwendungsbereich: Verdünnen und Reinigen bei YACHTCARE AntifoulingsKompatible Produkte: YACHTCARE ANTIFOULING SP (Art.Nr. 2520-701), YACHTCARE ANTIFOULING ACTION (Art.Nr. 2520-801)

€19.90 *
Details
YACHTCARE Antifouling Thinner
YACHTCARE Antifouling Thinner
YACHTCARE WASH & WAX cleaner
YACHTCARE WASH & WAX cleaner
WASH & WAX is a mild wax concentrate that cleans treated surfaces in one pass and conserves them at the same time.Intended for quick and effortless care of all exterior surfaces.The concentrate removes even tenacious dirt. Cleans and waxes the surface at the same time, which significantly lengthens the protection of waxed and polished surfaces.YC WASH & WAX contains no solvents, is silicone-free and biodegradable.For cleaning and protecting gelcoat, plastic, metal and painted surfaces.

€14.95 *
Details
YACHTCARE REFINISH Premium Gloss polisher
YACHTCARE REFINISH Premium Gloss polisher
Silicon and abrasive free polishing paste with PTFE non-stick technology for long lasting shine and guard against new staining.This product is applied following the refinishing of the surfaces with YACHTCARE REFINISH 1 and is much easier and faster to use than sealing pastes.

€15.95 *
Details
YACHTCARE gelcoat refinish coarse
YACHTCARE gelcoat refinish coarse
Abrasive sanding and polishing paste with a coarse granulation for work on heavily chalked and faded gel coat surfaces.Can be processed by hand or machine.

€26.95 *
Details
YACHTCARE gelcoat refinish coarse
YACHTCARE gelcoat refinish coarse
YACHTCARE PU Pigment Paste
YACHTCARE PU Pigment Paste
Polyurethane pigment tinting paste for colour matching of gelcoat repair kits to the original gelcoat colour.PU Tinting Pastes are finely dispersed color pigments that use chemical ties to bind to the materials to be dyed.Max. addition 5%.

From €8.50 *
Details