Go to homepage
€0.00*
Jobs
Catalogue
Quick order

Epoxy base filler YACHTCARE

€37.90*

Content: 0.5 (€75.80* / 1 kg)

€37.90*

Content: 0.5 kg (€75.80* / 1 kg)

Prices incl. VAT plus shipping costs

Available, delivery time: 6-10 Tage

In stock

contents (g)
Ds
Solvent free, two component fine filler based on epoxy, that is especially waterproof.
This very effective putty can be employed above or below water on all surfaces sealed with any kind of epoxy primer.
It hardens to a smart, glue free surface, that is easy to sand and does not shrink up to a lamination strength of 20mm.
Content: 500g, colour: light grey

Product Safety:
For this product the hazard pictograms and signal words shown above apply, as well as the following hazard statements: H302, H314, H315, H319, H317, H411, H412..
more information
Show article
📖 View article in the TOPLICHT catalogue

Solvent free, two component fine filler based on epoxy, that is especially waterproof.
This very effective putty can be employed above or below water on all surfaces sealed with any kind of epoxy primer.
It hardens to a smart, glue free surface, that is easy to sand and does not shrink up to a lamination strength of 20mm.
Content: 500g, colour: light grey

Product Safety:
For this product the hazard pictograms and signal words shown above apply, as well as the following hazard statements: H302, H314, H315, H319, H317, H411, H412..

Description

Solvent free, two component fine filler based on epoxy, that is especially waterproof.
This very effective putty can be employed above or below water on all surfaces sealed with any kind of epoxy primer.
It hardens to a smart, glue free surface, that is easy to sand and does not shrink up to a lamination strength of 20mm.
Content: 500g, colour: light grey

Product Safety:
For this product the hazard pictograms and signal words shown above apply, as well as the following hazard statements: H302, H314, H315, H319, H317, H411, H412..

Downloads

Legal information about the product
CLP Regulation
Symbols ghs02 ghs07 ghs09
Signalword Danger!
H phrases H315, H319, H317, H411, H302, H314, H412
P phrases P101, P102, P273, P280, P333+P313, P337+P313, P363, P501, P301+P330+P331, P303+P361+P353, P305+P351+P338, P310
Questions about the product?

Similar products

Epoxy fibre filler YACHTCARE
Epoxy fibre filler YACHTCARE
Solvent free, two component fine filler based on epoxy and compounded with special fibres, that is waterproof and especially well suited for applications where high mechanical strains have to be absorbed.This very effective putty can be employed above or below water on all surfaces sealed with any kind of epoxy primer.Also very well suited for the filling of very rough unevenness.Laminations of up to 30mm are possible in one working cycle.It hardens to a smart, glue free surface, that is easy to sand and does not shrink.Content: 500g, colour: light blue.

€39.90 *
Details
Epoxy fine filler YACHTCARE
Epoxy fine filler YACHTCARE
YACHTCARE EPOXY FEINSPACHTEL is a quick-drying 2-component epoxy filler with the highest surface quality. The thixotropic fine filler, which is particularly easy to sand, produces a surface with very low pore volume. It is used for the fine processing of surfaces from painting, as well as for the reconditioning and covering of various materials in above and below water areas. YACHTCARE EPOXY FEINSPACHTEL is solvent-free and is characterised by its high water resistance and good sanding properties. Area of application: Universal for all imaginable fine filling work above and below water. Suitable for boat building materials such as GFK, CFK, steel, aluminium and non-working wood. GRP, steel and aluminium substrates must be primed with a 2-component epoxy primer such as EPOXY PRIMER. Colour: cream white.

€39.90 *
Details

Last seen products

More articles from this category

EPIFANES COMBI filler
EPIFANES COMBI filler
Simple 1-component fine and smoothing filler for wood and one-component paints above the waterline. The applied layers (max. 1mm thickness) can be sanded after 24 hours and overpainted with one-component products.Color: white.

From €14.49 *
Details
EPIFANES Polyester Filler
EPIFANES Polyester Filler
Two-component filler suitable for small repairs on steel and fibreglass. Can be applied in thick layers.After mixing, pot life is 5-10 minutes. Add 2- 4% hardener. Can be painted over after 30-60 minutes at 18°C. Can be overpainted with 1- and 2-component paints and varnishes.Tip: After drying, sand immediately and precoat with 20% thinned varnish to avoid moisture absorption and shrinkage of the varnish layers. Color: white.

€24.89 *
Details
EPIFANES EPOXY FILLER 1500
EPIFANES EPOXY FILLER 1500
EPIFANES 1500 is a non-shrinking, two-component epoxy-based filler.This filler provides smooth surfaces and can be applied in thick coats. It is exceptionally easy to sand and is suitable for all common boatbuilding materials above and below water. It can be applied to vertical surfaces in layers up to 2 cm thick in one operation, and even thicker in horizontal surfaces without shrinking during curing.After thorough degreasing and sanding, the cured filler can then be recoated with a 2-component system. Smaller repair areas can also be overcoated with 1K paints, such as EPIFANES MULTI-MARINE Primer. Mixing ratio 2:1.Tip: EPIFANES Fibreglass Prep Cleaner is suitable as a cleaner for degreasing the filled surface.

€53.00 *
Details
EPIFANES Epoxy Finishing Filler
EPIFANES Epoxy Finishing Filler
Two-component, resistant epoxy fine filler that does not shrink during curing and achieves a particularly smooth surface. Before mixing, the individual components should first be stirred well alone and then together. The filler can then be applied in thin layers (up to 1 mm layer thickness on vertical surfaces). If the surface is to be painted with 1-component varnish afterwards, a layer of 2-component varnish or primer must be applied first.Color: gray.

€59.90 *
Details
SEA-LINE gel coat filler
SEA-LINE gel coat filler
Easy-to-use fine layer filler for repairing minor damage to the gelcoat layer.The filler is formulated so that it does not sag on vertical surfaces and can also be used in an environment with high humidity.After curing, the gelcoat filler forms a high-gloss, hard and non-sticky surface.

From €27.91 *
Details
Epoxy base filler YACHTCARE
Epoxy base filler YACHTCARE
Solvent free, two component fine filler based on epoxy, that is especially waterproof.This very effective putty can be employed above or below water on all surfaces sealed with any kind of epoxy primer.It hardens to a smart, glue free surface, that is easy to sand and does not shrink up to a lamination strength of 20mm.Content: 500g, colour: light greyProduct Safety: For this product the hazard pictograms and signal words shown above apply, as well as the following hazard statements: H302, H314, H315, H319, H317, H411, H412..

€37.90 *
Details
Epoxy fibre filler YACHTCARE
Epoxy fibre filler YACHTCARE
Solvent free, two component fine filler based on epoxy and compounded with special fibres, that is waterproof and especially well suited for applications where high mechanical strains have to be absorbed.This very effective putty can be employed above or below water on all surfaces sealed with any kind of epoxy primer.Also very well suited for the filling of very rough unevenness.Laminations of up to 30mm are possible in one working cycle.It hardens to a smart, glue free surface, that is easy to sand and does not shrink.Content: 500g, colour: light blue.

€39.90 *
Details
Epoxy filler AIRO-NAUTIC
Epoxy filler AIRO-NAUTIC
AIRO - NAUTIC epoxy filler. Inexpensive all-around epoxy resin - fine filler. Two component finishing filler for all boatbuilding materials. Does not absorb water, thus is very good for underwater surfaces and is intended as an osmosis barrier. A thin layer results in a very fine surface.Colour: Light grey. Also available in exceptionally cheap large containers.

From €26.50 *
Details
AIRO-NAUTIC ULTRA-LIGHT epoxy filler
AIRO-NAUTIC ULTRA-LIGHT epoxy filler
Advaced development of the AIRO-NAUTIC epoxy filler with decidedly lower mass per unit area (approx. 0,5-0,7 kg/l).Inexpensive all-around epoxy resin - fine filler.Two component finishing filler for all boatbuilding materials.Does not absorb water, thus is very good for underwatersurfaces and is intended as an osmosis barrier. Good filler for osmosis repair.A thin layer results in a very fine surface.Colour: light grey.

From €29.90 *
Details
Epoxy fine filler YACHTCARE
Epoxy fine filler YACHTCARE
YACHTCARE EPOXY FEINSPACHTEL is a quick-drying 2-component epoxy filler with the highest surface quality. The thixotropic fine filler, which is particularly easy to sand, produces a surface with very low pore volume. It is used for the fine processing of surfaces from painting, as well as for the reconditioning and covering of various materials in above and below water areas. YACHTCARE EPOXY FEINSPACHTEL is solvent-free and is characterised by its high water resistance and good sanding properties. Area of application: Universal for all imaginable fine filling work above and below water. Suitable for boat building materials such as GFK, CFK, steel, aluminium and non-working wood. GRP, steel and aluminium substrates must be primed with a 2-component epoxy primer such as EPOXY PRIMER. Colour: cream white.

€39.90 *
Details