Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Modeling clay (epoxy/hardener) for quick repairs above and below the waterline. Adheres to GRP, wood, metal and plastic. Simply knead well and spread on.Hardens quickly.Mechanically resilient, can be painted over, resistant to salt water, oil and most acids and alkalis.
The anodes are made up of a brass nut, with screwed-on zinc cap.
The anodes consist of a brass nut,with a screwed-on zinc cap. Metric thread.
Ground plate for the welding of anodes as they are employed by professional companies such as shipyards and port service companies.Available made from normal steel St.37.2 (mild steel) or from stainless steel (AIS316).The threaded part is point welded with the base plate, shipping with the nut and washer with external gear teeth according to DIN 6798.
For brackish and saltwater. Oblong with steel core. Slots for attachment.
Magnesium anode (only for brackwater or fresh water), round or long oval shaped with a steel core for bolting on.
For fresh-, brackish-, and saltwater. Oblong with a steel core, with slots for attachment.
Dimpled sound insulation panel made of fine-pored foam, flame-retardant and self-extinguishing.Size 1x1m, weight approx. 1.3 kg per panel.A contact adhesive is recommended, adhesive consumption approx. 250 ml/m²
Magnesium anodes to bolt onto the propeller shaft.Short form factor, two-parts with stainless steel bolts.
Magnesium anodes to bolt onto the propeller shaft.Round form factor, two-parts with stainless steel bolts.
Made from coconut fibres.King size. Natural brown colour with black printing:Â "Welcome on Board" and stylish anchor.
Aluminium anodes to bolt onto the propeller shaft.May be used in saltwater, brackish or fresh water.Round form, two parts bolted together with stainless steel bolts.
Round Aluminium rudder anode (salt, brackwater or fresh water) with steel bolt.Shipping in pairs.
For fresh, brackish, and saltwater.Oblong form. with undrilled steel flaps to be welded to a steel hull .
Aluminium anode, suitable for saltwater, brackish or fresh water.Round or oblong form.With a zinc plated steel core for bolting on to the hull.
The rat guard from commercial shipping is an indispensable protection against unwanted rodents on board in many harbours around the world.The rat guard is made of 1.0 mm thick, particularly strong, galvanised sheet steel and has a diameter of 540 mm.It is opened on one side, attached to the mooring line as a barrier for the rats and secured with two wing nuts. As it is infinitely adjustable, it is suitable for mooring lines with a diameter of 50 mm to 100 mm.Weight: 2.5 kg.The rat guard is also available in a lighter version (0.8 mm thick, galvanised sheet steel). You will find this version (article no. 2811-000) further down on this page under "Similar products".
Extremely effective protection against rodent pests!The rat plate is a further development of the well-known rat guard used in commercial shipping. The rat plate made of black, very smooth polystyrene hard plastic can be stowed to save space and is very easy to install without tools.The plate is rotatably mounted on the two-part PVC centrepiece, which encloses the mooring line. The centre piece is locked magnetically.If the rats try to climb over the locking plate, they will inevitably fall off.Especially for use on (smaller) yachts, you will find a smaller version of the rat plate (Article-No. 2811-034) further down on this page under "Similar products".
Rebound-free sledgehammer, whole-steel design, with polyamide head and plastic handle. Weight: 770 g Length: 300 mm Head diameter: 40 mm
The Zinc Spray from EURO LOCK offers a fast-drying corrosion protection with excellent long-term effect for all metals. It is suitable for use on thermally stressed parts such as intake manifolds, heat exchangers, oil coolers, etc. It is electrically conductive and heat resistant up to 500 °C.Additionally, it is suitable for reworking or repairing defects on hot-dip galvanized parts, and for touching up damaged zinc coatings.Also suitable for refreshing galvanized anchors, anchor chains, and for repairing welding and sheet metal work. Prevents rust and provides good protection against extreme weather conditions. Zinc content approx. 95% in the dry film. Can be overpainted with most one- and two-component primers and paints.Technical DataSubstrates: All metalsPretreatment:Surface must be clean, dry, free of grease and oilShake can well for approx. 2 minutes before useTest spraying recommendedSubsequent coating: Can be overpainted with many paint systems (own testing recommended)Coverage: No informationApplication method: Spray from approx. 20–30 cm distance in a crisscross patternDrying times at 20 °C: Dust-dry after approx. 8 min; tack-free after 20–30 min; fully dry after 48 hrsFurther information on application can be found in the technical data sheet under "Downloads".
High-quality plastic funnel with strainer.Particularly suited for filling fuel into a can, when the strainer stops unwanted contamination with dirt.Colour white.
This red plastic container for pyro emergency packs is also available as an empty "suitcase". Intended for the storage of flares, emergency provisions, first-aid kits, documents, and much more.Contents ca. 10 l.
Transportation case for many uses, watertight, airtight, intended for consumables. Very stable barrel made from HDPE (Polyethylene). White with red cover. The grippy top with rubber seal allows easy opening and closing of the container, with eyelets for attachment lanyards or sealing. The large barrels can be used as stools. From size 42 litre up, comes with a strong carrying handle. The containers can be stacked stably, because the bases and the caps fit each other perfectly. Some sizes can be nested (see dimensions). UN markings. For many onboard storage uses, for cruising, kayak and canoe travel, roof racks and many other uses outdoors.
