Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Very heavy professional punch, made of tool-grade steel with rotating wheel and locking mechanism. Pipe and anvil hardened. 6 punches: 2, 2.5, 3, 3.5, 4, 5 mm. Length 230 mm, weight 460 g.
Heavy forged needle-nose pliers that, as a result of their serrated grips and size (length 260 mm), are well suited for riggers as sailmakers pliers for sewing and rigging work.The teeth allow you to pull sail needles through heavy cloth, but the pliers are also very well suited to pull tough threads, because of their rounded jaws.Made from tool-grade steel, serrated jaws, handle covered with plastic.Weight 410 g.
MUNDIAL thread scissors. Plastic scissors with stainless steel blades.Weight: 22 g.
Quality tool of tool-grade steel, forged and painted, polished head.Length 220 mm.
Plastic housing and handle; brass soldering tip. In addition to normal soldering, such as hard- and soft-soldering, it is well suited for rigging and rope work. Max. 1750°C, Adjustable flame. Comes complete with a 190g gas can, which is enough for 1.5 - 3.5 hours.
Complete sets with brass grommets in light quality.Each with simple striking tool. Handyman standard.
Lacing button with counter bore. Can be used with countersunk or raised head screews.
Hot-dip galvanised, bevelled roves, pressed from thick steel plate.Of the type traditionally employed for the permanent riveting of fittings and the tightening of the planks to the frames of the wooden ship.Thickness ca. 4mm.
Chain hook.Made from polished brass.A practical helper, if your anchor hooks itself on someone else's chain or rode.Length: 120 mm.
A canvas eyelet made from plastic.The eyelet is inserted at the same time as the hole is punched with one hit of a hammer. Only very heavy cloth requires pre-punching.Shipping as a set of 12.
Practical aid for lashing and fastening plastic tarpaulins. For mounting this eyelet no tools are needed! It replaces torn out eyelets in a tarpaulin or tarp and is reusable! Assembly:Wedge and tab of the two-part eyelet made of white polyamide are pushed into each other and clamp the fabric. The higher the pull on the eyelet, the stronger the wedge is pulled into the tab and the tighter the fabric sits. Available in two different sizes, each in a set.
Inexpensive universal tarpaulin for indoors and outdoors at wind-protected places of use. The tarpaulin is translucent, has high UV resistance and is 100% waterproof.Both sides are coated, 150 g/m² strong polyethylene tape fabric (850 denier). The edges are welded all around, reinforced with PP tape and equipped with large aluminum eyelets every 50 cm. The corners are reinforced with plastic.Color: white.
Two-part lashing straps with inspection label according to DIN EN 12195-2.Extra-strong ratchet with wide handle on a 50 cm strap section.Polyester webbing.Self-locking ratchet that will not release even under heavy vibration.Both sides fitted with zinc-plated claw hooks.For securing boats or cargo.The permissible maximum lashing capacity (LC = Lashing Capacity) applies for straight pull.
Heavy brass cloth grommets, nickel plated. For use with a special tool. DIN 7332. In order to get the best price, please order only entire 100-piece packages (or in amounts divisible by 100).
Pliers for crimping stranded wire with copper crimps (Art-Nr. 2346-020 to -050).Equipped with wire cutters in a simple and inexpensive design for recreational boaters.Not adjustable.Crimping pressures: C, G, M, P and X.
Precise pliers for crimping stranded wire from 1.5 to 4 mm (Model NT64) or 3 to 5 mm (Model NT63). Professional tool.Properly completed crimps approach the strength of processed wire.Length: 510 mm.Interchangeable jaws for 5 und 6 mm wire are available.
Basic swaging tool of groove C for 1,6 - 2 mm (1/16") wire.Made in the USA from stainless steel with handles from red plastic.
Simple tool for recreational boaters, so that they can undertake compression of copper crimping thimbles on stainless steel wires.For screwing.
A good and inexpensive stranded-wire cutter for workshop and onboard use.The hardened triangular blades ensure a clean, flat cut. Made in Japan.
Handy tool for cutting stranded wires.In an emergency, even thick wires can be cut with little effort.The maximum required strength for the hydraulic levers is a mere 18 daN (kg). The cutting head is set on the wire with a quick-release fastener.We recommend this tool for all yachts with shroud wires of more than 10 mm diameter.
Bow nut.Metric (for example for closing ports). Made from investment-cast A4 stainless steel.
FF-P1 and P2 fine dust masks with exhalation valve.Protection from nonpoisonous fine dust, particles and fibres, skin friendly and light material, built-in nose clip, comfortable to wear, one size fits all. The fine dust masks conform to EN 149.
Traditional leather grease from Denmark, made of natural wax and oil, to conserve and protecte leather.Colour: amber.
