Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Functional lashing hook of hot-dip galvanized cast brass.Three-holed mounting plate, open hook and closed ring.
All-purpose grease for the lubrication of face-to-face joints.The Vaseline is water-repellent (hydrophobic) and provides as such a perfect protection against corrosion.Free of natural resins and acids.
The water- and pressure-resistant multi-purpose grease ensures optimum long-term lubrication and protects against corrosion and abrasion.
Universal air expulsion roller, flexible roller for removing entrapped air bubbles and for compressing laminates.
Universal air expulsion roller, metal disc roller for removing entrapped air bubbles and for compressing laminates.
Universal air expulsion roller, small disc roller for removing entrapped air bubbles and for compressing laminates.
Long handle and round brush.Painter quality: fine and light Chinese bristle.
Special flat brush to applicate and allocate topcoats and gelcoats smoothly.
Brass, polished or chromed finish, square.These attractive cleats are also well suited for halogen light installation and hanging curtains.
Transparent adhesion promoter based on polyurethane resin for various interior and exterior plastic surfaces. COELAN Flexo Adhesion Primer is particularly suitable for reworking already hardened COELAN products based on polyurethane or epoxy resin, if these are to be further coated in color. Not suitable for substrates made of polyethylene (PE) or polypropylene (PP).Application: Existing COELAN polyurethane coatings must be cured for at least 7 days, epoxy resin coatings for at least 24 hours. Store the container at room temperature for approx. 24 hours before use. Apply the product evenly, thinly and over the entire surface using a cloth.
LACQ YACHTLACK is a traditionally cooked clear varnish based on wood oil and phenolic resin with a high solids content and integrated UV filter. It forms a high-gloss, elastic protective layer with excellent weather and water resistance. The varnish is suitable for new builds on solid, raw wood (e.g. mahogany, meranti, Oregon pine) as well as for renovation coats on intact 1K or 2K varnish systems in the above-water area. Also suitable for doors, window frames, and garden furniture.Application: The varnish is applied with a brush or by spraying. For new builds, seven coats are recommended: the first coat diluted 50%, the second 25%, the third 15%, coats 4 to 7 only 0–5%. Intermediate sanding is done with P220 (dry), P280 (dry), and P400 (wet). Dilution is done with turpentine (brush) or petrol (spray gun). Technical DataApplication area: High-gloss clear varnish for wood surfaces in the above-water area Substrate: Solid wood (e.g. mahogany, meranti, Oregon pine), plywood; clean, dry, sandedPrimer: Not required Coverage: approx. 14 m²/l (depending on substrate and application)Thinning: Turpentine (brush), petrol (spraying)Application method: Brush or spray gun (1.2–1.5 mm nozzle, 2–3 bar, 20–24 sec. DIN 4)Drying times (at 18 °C): Dust dry: approx. 24 hrs, recoatable: approx. 24 hrsFurther information on application can be found in the Technical Data Sheet under 'Downloads'.
This universal nitro thinner dissolves almost all fluids, 1 component paints and varnishes, as well as tar and bitumen products.1 litre can.
MEYER Brush Cleaner dissolves almost all liquid, 1-component paints and varnishes as well as tar and bitumen products and makes these substances water-soluble.
The traditional agent for the calming of stormy seas.Pure line seed oil without chemical additives and therefore no pollution of the environment.
Leak tightness test fluid with DVGW approval (German Technical and Scientific Association for Gas and Water)Nontoxic, with corrosion protection , DIN standard DVGW (German Technical and Scientific Association for Gas and Water).Leak tightness test fluid for flow systems such as pipes and tubes, glass bottles and containers, pneumatic brake sytems. Soldering and welding connections.
Basic caulking gun.Made of laquered steel sheet. To be used with 310 ml standard cartridges.
COX caulking guns are professional tools, made in England.Strong construction with hexagonal rod. The closed professional models with aluminum pipes, strong metal mechanism and strong handles of painted aluminum are intended both for cartridges and packs.
The SIKA KPL pneumatic dispenser is manufactured by COX in England, it is a stable, powerful tool for professional use.The pneumatic air of the Airflow dispenser acts directly on the cartridge piston, so that a usmooth discharge of the sealant is guaranteed. The working pressure is infinitely variable.The pneumatic dispenser is very lightweight and, together with the ergonomic handle, ensures easy and effective work.Technical data:Maximum thrust 1.35 kNPressure approx. 6.8 barAluminum cartridge tubeHandle made of epoxy-coated aluminumNozzle diameter 38 mmWeight 0.62 kgFor 310 ml cartridgeges
Practical accessories for standard plastic cartouches. 45° angle for nozzle tip.
Heat-resistant special silicone, intended for continuous temperaturesto 280°C and short term temperatures to 320°C.Cannot be painted.
