Flexo adhesive primer transparent 1l can COELAN

A transparent, semi-matt 1-component coating based on polyurethane. COELAN Boat Coating Silk Matt serves as a satin finishing coat on surfaces that have previously been coated with COELAN Boat Coating Gloss. The product is characterized by its durability, UV and weather resistance, high elasticity and abrasion resistance as well as easy cleaning.Application: Ideally, the product should be stored at room temperature for 24 hours before application and applied at temperatures between 5 °C and 30 °C. The coating is applied evenly with a foam roller or brush. Personal protective equipment such as gloves and a respirator must be worn during application. The product is ready to use, but can be adjusted with max. 30 % COELAN thinner if necessary.

Transparent, glossy 1-component coating based on polyurethane resin for wood, plastic, and metal surfaces. COELAN Boat Coating Glossy is suitable for boat decks and all areas above the waterline.The product is UV-resistant, highly elastic, and remains breathable: water vapor can still diffuse from the coated material. Due to its extremely good weather resistance, long renovation intervals result. As a final coat (last layer), COELAN Boat Coating SILK MATT (matching articles) can also be applied. The boat coating can also be colored with COELAN color pastes (e.g., white, Art. No. 2622-1013).Application: The processing temperature should be between +5 °C and +30 °C. During processing and curing, ensure even ventilation, and personal protective equipment (gloves, respiratory mask) should be worn for safety. Depending on the substrate, pre-treatment with a suitable COELAN boat primer is required. Application is done in several even, generous layers with a brush or foam roller. For vertical surfaces, dilution with 10–30 % COELAN thinner is recommended. Depending on the area of use (walkable decks, masts, superstructures), 6-8 layers are required.Contains isocyanates. May cause allergic reactions. From August 24, 2023, appropriate training must be completed before industrial or commercial use (REACH Regulation Annex XVII)Technical DataArea of application: Transparent high-gloss coating for wood, plastic, and metal surfaces above the waterlineSubstrate: Requires COELAN boat primer depending on materialPrimer: COELAN boat primer (Art. No. 2620-001 or -101)Coverage: 1 l/m² Thinner: max. 30 % COELAN thinnerApplication method: Brush or foam rollerDrying times (at 23 °C, 50 % r.h.): Skin formation: approx. 2 hrs, walkable and recoatable: approx. 6 hrs, normally loadable: approx. 2 days, fully loadable: approx. 7 daysFurther information on processing can be found in the technical data sheet under 'Downloads'.