Cover eyelet

Thin wax coating for thin cotton and linen fabrics, tried and tested in traditional shipping. Makes the cloth waterproof, elastic and refreshes colors. Suitable for preserving, impregnating and re-dyeing canvas, tarpaulins, tents and much more. Caution: Stains easily!Application: Apply evenly to the cleaned, dry fabric with a sponge or brush and work into the fibers - on both sides for thick fabrics. Remove excess material with a lint-free cloth.Technical dataContainer: 1l can Coverage: approx. 5m²/l Application temperature: 10-25 °CDrying time: approx. 24 hoursNote: For thicker cloths we recommend HYDROLIN Canvas Lohe (Art. No. 2531-000). The color shades of HYDROLIN Lohe and HYDROLIN Special do not match exactly due to the different viscosity and different pigment contents.

Extra strong, extremely tear-resistant and durable industrial and tarpaulin. Translucent, high UV resistance and 100% waterproof.Both sides coated, 300 g/m² strong polyethylene tape fabric (3000 denier). The edges are welded all around, reinforced with PP tape and equipped with large brass eyelets every 50 cm. The corners are reinforced with plastic.Tarpaulin size = finished size.

Heavy tarpaulin cloth made of 100% cotton, impregnated with a paraffin-based mixture (PFAS-free).Despite the impregnation, this cloth is a natural product and therefore not absolutely rot-proof. It must be dried and re-impregnated from time to time.The cloth may show small weaving irregularities and color nuances.Color: olive green or natural.

Light cotton cloth with flame save impregnation. Weight approximately 200 g/sq.m, colour off-white.Breathable dust cover for the dry boat shed.The fabric is flame retardant in accordance with building material class B 1 of DIN 4102.Material sold by the metre, 320 cm wide. Please order by the meter (1 lfm = 3,2 sqm).Notice: the flame retardant characteristic is lost after washing.

A canvas eyelet made from plastic.The eyelet is inserted at the same time as the hole is punched with one hit of a hammer. Only very heavy cloth requires pre-punching.Shipping as a set of 12.

DURADON LIGHT is an impregnated sailcloth, woven from spun polyester fiber. This sailcloth is similar in appearance and feel to cloths made of cotton, but has all the advantages of a synthetic fiber:very good UV resistance,high abrasion resistance,good tensile strength and tear resistance.Since DURADON has considerably more stretch than modern synthetic sailcloth due to its traditional weave (linen weave), corresponding guidelines should be observed in the use for sail making.The special impregnation of DURADON cloth is similar to the oil-copper finish formerly used for sails and provides high breathability with good water resistance and durable suppleness. The impregnation may stain somewhat.Cloth width 61 cm (24"), seam markes on both sides.Cloth weight 640g/m².Colors: white, maroon or brown.We offer the sailcloth DURADON EXTRA as a whole roll at a unit price. For manufacturing reasons, the number of meters on the roll varies. Please choose a roll with the length that suits you from the table below.Small quantities per meter are also available.DURADON is available in two versions: DURADON LIGHT has a cloth weight of 520 g/m², DURADON EXTRA has a cloth weight of 640 g/m², with the same warp yarn and a slightly stronger weft yarn.Ask us for cloth and color samples!

DURADON EXTRA is an impregnated sailcloth, woven from spun polyester fiber. This sailcloth is similar in appearance and feel to cloths made of cotton, but has all the advantages of a synthetic fiber:very good UV resistance,high abrasion resistance,good tensile strength and tear resistance.Since DURADON has considerably more stretch than modern synthetic sailcloth due to its traditional weave (linen weave), corresponding guidelines should be observed in the use for sail making.The special impregnation of DURADON cloth is similar to the oil-copper finish formerly used for sails and provides high breathability with good water resistance and durable suppleness. The impregnation may stain somewhat.Cloth width 61 cm (24"), seam markes on both sides.Cloth weight 640 g/m².Colors: white, maroon or brown.Whole rolls are also available.DURADON is available in two versions: DURADON LEICHT has a cloth weight of 520 g/m², DURADON EXTRA has a cloth weight of 640 g/m², with the same warp yarn and a slightly stronger weft yarn.Ask us for cloth and color samples!

DURADON LIGHT is an impregnated sailcloth, woven from spun polyester fiber. This sailcloth is similar in appearance and feel to cloths made of cotton, but has all the advantages of a synthetic fiber:very good UV resistance,high abrasion resistance,good tensile strength and tear resistance.Since DURADON has considerably more stretch than modern synthetic sailcloth due to its traditional weave (linen weave), corresponding guidelines should be observed in the use for sail making.The special impregnation of DURADON cloth is similar to the oil-copper finish formerly used for sails and provides high breathability with good water resistance and durable suppleness. The impregnation may stain somewhat.Cloth width 61 cm (24"), seam markes on both sides.Cloth weight 520g/m².Colors: white, maroon or brown.We offer the sailcloth DURADON EXTRA as a whole roll at a unit price. For manufacturing reasons, the number of meters on the roll varies. Please choose a roll with the length that suits you from the table below.Small quantities per meter are also available.DURADON is available in two versions: DURADON LIGHT has a cloth weight of 520 g/m², DURADON EXTRA has a cloth weight of 640 g/m², with the same warp yarn and a slightly stronger weft yarn.Ask us for cloth and color samples!

DURADON LIGHT is an impregnated sailcloth, woven from spun polyester fiber. This sailcloth is similar in appearance and feel to cloths made of cotton, but has all the advantages of a synthetic fiber:very good UV resistance,high abrasion resistance,good tensile strength and tear resistance.Since DURADON has considerably more stretch than modern synthetic sailcloth due to its traditional weave (linen weave), corresponding guidelines should be observed in the use for sail making.The special impregnation of DURADON cloth is similar to the oil-copper finish formerly used for sails and provides high breathability with good water resistance and durable suppleness. The impregnation may stain somewhat.Cloth width 61 cm (24"), seam markes on both sides.Cloth weight 520g/m².Colors: white, maroon or brown.Whole rolls are also available.DURADON is available in two versions: DURADON LIGHT has a cloth weight of 520 g/m², DURADON EXTRA has a cloth weight of 640 g/m², with the same warp yarn and a slightly stronger weft yarn.Ask us for cloth and color samples!

Inexpensive universal tarpaulin for indoors and outdoors at wind-protected places of use. The tarpaulin is translucent, has high UV resistance and is 100% waterproof.Both sides are coated, 150 g/m² strong polyethylene tape fabric (850 denier). The edges are welded all around, reinforced with PP tape and equipped with large aluminum eyelets every 50 cm. The corners are reinforced with plastic.Color: white.

End cap for tarpaulin batten, blue, 18mm.

Strong yet fine cloth made from pure linen (flax). A durable cloth for many sewing and textile jobs on ships and in the leisure sector (sails, rigging bags, tarpaulins etc.). This pure natural product is not impregnated and therefore not rot-resistant. It must be dried regularly. We recommend Hydrolin sailcloth as an impregnation. Supplied loose per meter.Color: natural Width: 156 cm Weight: 590 g/m²

Practical aid for lashing and fastening plastic tarpaulins. For mounting this eyelet no tools are needed! It replaces torn out eyelets in a tarpaulin or tarp and is reusable! Assembly:Wedge and tab of the two-part eyelet made of white polyamide are pushed into each other and clamp the fabric. The higher the pull on the eyelet, the stronger the wedge is pulled into the tab and the tighter the fabric sits. Available in two different sizes, each in a set.

High-viscosity coating for heavy cotton cloth and tarpaulins that has been tried and tested in the shipping industry for decades.HYDROLIN Lohe is ideal for preserving, impregnating and re-colouring heavy cotton and linen cloth, e.g. on ships, mills or trucks. Made on the basis of waxes and environmentally friendly colours and thinners. Caution: Stains easily!Application: The product is applied evenly to the cleaned and dry fabric with a brush or tassel. For thick fabrics, we recommend applying the product to both sides. Excess material can be removed with a lint-free cloth.Theoretical coverage (may vary depending on application method and material): 4 m2/lDrying time: ca. 24 hHYDROLIN Special is suitable for thinner fabrics and cloths.Note: The colour shades of HYDROLIN Lohe and HYDROLIN Special do not match exactly due to the different viscosity and different pigment contents.

Clean jute fabric, course weave.Weight approx. 320 g/m.sq., 120 cm wide.This cloth is necessary in rigging applications to parcel (process with impregnated fabric strips) a wire before it can be covered with thin rope.

Brass batten mount, for embedding, with round mounting plate (D 30 mm).Polished or chromed finish.For 18 x 2 mm battens.

Brass batten mount (40 x 25 mm), screws in.Polished or chromed finish.For 18 x 2 mm battens.

The NOA A-frame forms a roof structure from sturdy aluminium tubes, over which tarpaulins (see further down on this page under "Accessories") are stretched. The yacht is thus well protected, e.g. during winter storage on land in the open air.The construction is suitable for boats / yachts without bow and stern pulpit. The A-frame stands firmly on the ground on supports. This takes the wind pressure off the boat.The specified length refers to the upper pole, which forms the ridge of the roof construction.The exact composition of the different sized sets can be found in the assembly instructions under "Downloads & Information".The complete set is supplied in a 2.5 metre long cardboard roll. A transport bag is available as an accessory (see below).

Sturdy bag for the tubes of the NOA deck frame, overhang deck frame or A-frame.The tubes can be easily stowed and transported in the bag with a two-part zip.

The NOA deck frame forms a roof structure made of sturdy aluminium tubes, over which tarpaulins (see ‘Accessories’) are stretched. This provides the yacht with good protection, for example during winter storage on land in the open air or at its mooring.The structure is suitable for boats/yachts with a bow and stern basket with a tube diameter of 22 mm or 25 mm. The deck frame is screwed to the bow and stern basket at the front and rear. The middle supports are placed on the deck (against the coaming).The specified length range refers to the upper bar, which forms the ridge of the roof structure. To obtain the desired length, the end elements can be shortened accordingly.  Please refer to the assembly instructions under ‘Downloads’ for the exact composition of the different sized sets.The complete set is delivered in a 2.5 metre long cardboard tube. A transport bag is available as an accessory.

Fittings for the NOA deck frame, overhang deck frame or A-frame.The standard sets can be customised even further to suit your own yacht with additional fittings and tubes (you will find these further down on this page under "Accessories").

The NOA Extra overhang deck frame forms a roof structure from sturdy aluminium tubes, over which tarpaulins (see "Accessories" further down on this page) are stretched. The yacht is thus well protected, e.g. during winter storage on land in the open air or at a mooring on the water.The construction is suitable for boats / yachts with railing feet as well as bow and stern pulpit with a tube diameter of 22 mm or 25 mm. The overhang deck frame is bolted to the bow and stern pulpit at the front and aft. The centre supports are attached to the railing feet using adapters. The outer tube holds the tarpaulin away from the hull. This prevents chafing on the hull and ensures optimum ventilation.The specified length refers to the upper pole, which forms the ridge of the roof construction.The exact composition of the different sized sets can be found in the assembly instructions (Aufbauanleitung) under "Downloads & Information".The complete set is supplied in a 2.5 metre long cardboard roll. A transport bag is available as an accessory (see below).

Tubes for the NOA deck frame, overhang deck frame or A-frame.The standard sets can be customised even further to suit your own yacht with additional poles and fittings (these can be found further down on this page under "Accessories").

Universal surface impregnation for many absorbent surfaces such as sails, tarpaulins or boat cushions, as well as transparent protection for natural stone and wood surfaces. The product does not build up, but is absorbed into the surface, is invisible and does not change the color of the treated surfaces. OMNISIDE INNOPERL is highly water, oil and dirt repellent (hydrophobic and oleophobic) and the treatment creates surfaces that are easy to clean.Made on the basis of fluoropolymers, solvent- and silicone-free, therefore suitable for indoor use. NOT SUITABLE for: Application on lime putty techniques in the facade area, leather.Application: The product can be applied with a brush, fur roller, cloth or pressure pump sprayer. After drying, there must be a pronounced water-repellent effect, otherwise repeat the application.Technical DataApplication area: absorbent and low-absorbent substrates, natural stone, plaster, exposed concrete, textiles (e.g. awnings, covers, cushions)Substrate: clean, dry, grease-free, not for constant water exposureApplication: brush, roller, cloth, pump sprayer, immersion methodCoverage: approx. 10 m²/lThinner: water, up to 1:2 dilution possibleApplication temperature: +10 °C to max. +25 °C (avoid direct sunlight)Drying (20 °C): dry after approx. 2 hrs, fully resistant after 24 hrsFurther information on application can be found in the Technical Data Sheet under "Downloads".