NOA deck frame for (winter storage) tarpaulin

from €589.00*

€589.00*

Prices incl. VAT plus shipping costs

Available in 5 days, delivery time 1 Tag

Available in 5 days

model

Deck frame

Ridge length (m)

The NOA deck frame forms a roof structure from sturdy aluminium tubes, over which tarpaulins (see further down on this page under "Accessories") are stretched. The yacht is thus well protected, e.g. during winter storage on land in the open air or at a mooring on the water.

The construction is suitable for boats / yachts with a bow and stern pulpit with a tube diameter of 22 mm or 25 mm. The deck frame is bolted to the bow and stern pulpit fore and aft. The centre supports are placed on deck (against the coaming).

The specified length refers to the upper pole, which forms the ridge of the roof structure.

The exact composition of the different sized sets can be found in the assembly instructions (Aufbauanleitung) under "Downloads & Information".

The complete set is supplied in a 2.5 metre long cardboard roll. A transport bag is available as an accessory (see below).

more information

Show 8 articles

Art. No.	model	Ridge length (m)	Unit price	Delivery time	Note list	Buy

Downloads

PDF: 2309-007 NOA Deckgestell für Winterlager-Plane

The specified length refers to the upper pole, which forms the ridge of the roof structure.

The exact composition of the different sized sets can be found in the assembly instructions (Aufbauanleitung) under "Downloads & Information".

The complete set is supplied in a 2.5 metre long cardboard roll. A transport bag is available as an accessory (see below).

Questions about the product?

Accessories

NOA tubes for the frame for (winter storage) tarpaulin

Tubes for the NOA deck frame, overhang deck frame or A-frame.The standard sets can be customised even further to suit your own yacht with additional poles and fittings (these can be found further down on this page under "Accessories").

From €11.50 *

Details

NOA fittings for the frame for (winter storage) tarpaulin

Fittings for the NOA deck frame, overhang deck frame or A-frame.The standard sets can be customised even further to suit your own yacht with additional fittings and tubes (you will find these further down on this page under "Accessories").

From €5.80 *

Details

NOA bag for the tubes of deck oder A-frame

Sturdy bag for the tubes of the NOA deck frame, overhang deck frame or A-frame.The tubes can be easily stowed and transported in the bag with a two-part zip.

€76.50 *

Details

CASO Heavy Duty Boat Cover, 300 g/m²

Extra strong, extremely tear-resistant and durable industrial and tarpaulin. Translucent, high UV resistance and 100% waterproof.Both sides coated, 300 g/m² strong polyethylene tape fabric (3000 denier). The edges are welded all around, reinforced with PP tape and equipped with large brass eyelets every 50 cm. The corners are reinforced with plastic.Tarpaulin size = finished size.

From €37.90 *

Details

STABO Boat Cover / Tarpaulin

A sturdy, tear-resistant winter tarpaulin for all applications. With a high UV resistance and 100% waterproof.Made from white translucent polyethylene tape fabric (1000 denier) coated on both sides, 260 g/m² thick. The edges are welded all around, reinforced with PP tape and equipped with large brass eyelets every 50 cm. The corners are reinforced with plastic.Tarpaulin size = finished size.

From €16.90 *

Details

DURO Boat Cover 150 g/m²

Inexpensive universal tarpaulin for indoors and outdoors at wind-protected places of use. The tarpaulin is translucent, has high UV resistance and is 100% waterproof.Both sides are coated, 150 g/m² strong polyethylene tape fabric (850 denier). The edges are welded all around, reinforced with PP tape and equipped with large aluminum eyelets every 50 cm. The corners are reinforced with plastic.Color: white.

From €12.90 *

Details

HOLDON Eyelet Clips for Tarpaulins

Practical aid for lashing and fastening plastic tarpaulins. For mounting this eyelet no tools are needed! It replaces torn out eyelets in a tarpaulin or tarp and is reusable! Assembly:Wedge and tab of the two-part eyelet made of white polyamide are pushed into each other and clamp the fabric. The higher the pull on the eyelet, the stronger the wedge is pulled into the tab and the tighter the fabric sits. Available in two different sizes, each in a set.

From €9.90 *

Details

Cover eyelet

A canvas eyelet made from plastic.The eyelet is inserted at the same time as the hole is punched with one hit of a hammer. Only very heavy cloth requires pre-punching.Shipping as a set of 12.

From €9.40 *

Details

Similar products

NOA overhang deck frame extra for (winter storage) tarpaulin

The NOA Extra overhang deck frame forms a roof structure from sturdy aluminium tubes, over which tarpaulins (see "Accessories" further down on this page) are stretched. The yacht is thus well protected, e.g. during winter storage on land in the open air or at a mooring on the water.The construction is suitable for boats / yachts with railing feet as well as bow and stern pulpit with a tube diameter of 22 mm or 25 mm. The overhang deck frame is bolted to the bow and stern pulpit at the front and aft. The centre supports are attached to the railing feet using adapters. The outer tube holds the tarpaulin away from the hull. This prevents chafing on the hull and ensures optimum ventilation.The specified length refers to the upper pole, which forms the ridge of the roof construction.The exact composition of the different sized sets can be found in the assembly instructions (Aufbauanleitung) under "Downloads & Information".The complete set is supplied in a 2.5 metre long cardboard roll. A transport bag is available as an accessory (see below).

From €1,075.00 *

Details

NOA A-frame for (winter storage) tarpaulin

The NOA A-frame forms a roof structure from sturdy aluminium tubes, over which tarpaulins (see further down on this page under "Accessories") are stretched. The yacht is thus well protected, e.g. during winter storage on land in the open air.The construction is suitable for boats / yachts without bow and stern pulpit. The A-frame stands firmly on the ground on supports. This takes the wind pressure off the boat.The specified length refers to the upper pole, which forms the ridge of the roof construction.The exact composition of the different sized sets can be found in the assembly instructions under "Downloads & Information".The complete set is supplied in a 2.5 metre long cardboard roll. A transport bag is available as an accessory (see below).

From €585.00 *

Details

Last seen products

Mon - Fri:	09 am - 06 pm
Sat:	09 am - 01 pm