Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Practical and light telescoping boathook set including a deck scrubber with plastic bristles and a cotton deck mop.The boathook is made from aluminium with a grey, detachable plastic hook which can be easily unscrewed and replaced by the scrubber or deck mop.When collapsed, the boat hook measures only 1,20m; the total length of the extended boat hook is 2,10m.
Strong lifesaver pole with rescue sling (D=500mm) made from in plastic clad stainless steel wire at one end.Very light and floatable, despite its good stability.Anodized aluminium tube, with plastic handle.Tube diameter: D = 28 mm, wall thickness 1.5 mm.
Together with a TOPLICHT boat hook pole and a boat hook tip, an individual boat hook can be manufactured.If you want us to do the mounting, we charge 19,00 Euro for it. A boat hook tip, a boat hook stem, and the article mounting of boat hooks (article-no 1223-000) must be added to the shopping cart.Please note: Items over 1.10 m long can only be shipped as bulky goods, increased shipping costs will apply.
Boat hook tip made of cast brass for self-assembly. The slender tip with delicate knobs can be riveted into a slotted boat hook handle. The mounting plate has no holes, two copper rivets for fastening are included.The inside diameter of the brass ring is 23 mm.Supplied without boat hook handle.
Very stable, floating boathook that will not warp. Built in Finnland of watertight laminated, light pine, coated with spar varnish. The handle knob at the end keeps the boathook from slipping out of the hand. The point of solid brass is riveted in the slitted stave and secured with an additional ring. Hint: Articles over 1.10 m length get shipped freight. See Shipping Costs.
Elegant boathook. Shaft of Nyatoh. Fitted with our brass end (Article-No. 1231-160). Hint: Articles over 1.10 m length get shipped freight. See Shipping Costs.
Sturdy boat hook made of watertight laminated and glossy varnished pine wood.Fitted with a screwed-on tip made of chromed brass.Please note: For Items over 1.10 m length, higher shipping costs will apply. Please see Shipping & Payment for further information.
Heavy metal blocks made of stainless steel (AISI 316) with high breaking loads. All blocks are provided with a swivel on one end and a fixed becket on the other. The sheaves are made of seawater resistant Tufnol with brass plain bearing bushes.The breaking loads are tested by Germanischer Lloyd (GL), therefore these blocks are also popular in industrial applications and commercial shipping.The maximum working load specified by the manufacturer is 50% of the breaking load (BRL).
Heavy stainless steel London folding snatch block.These blocks have a long swiveling eye on one side and a firm becket eye on the other.Strong design. Stainless-steel sheaves with bronze bearings.Matches our metal London blocks. The maximum working load should not exceed more than a quarter of the stated breaking load.
Steel block, painted black, with swiveling long eye and cast-iron sheave for rope.The breaking load is at least 4 times the safe working load (SWL).Matches our metal folding snatch blocks.Other designs and sizes available by request!
Steel folding snatch block, painted black, with swiveling long eye and cast-iron sheave for rope.The breaking load is at least 4 times the safe working load (SWL).These blocks are identical to London blocks and open from the side so that they can be attached to a running line.Matches our metal London blocks.
Boathook tip made from cast bronze polished or chrome plated.Together with a TOPLICHT boat hook pole and this boat hook tip, an individual boat hook can be manufactured.
Sand-cast brass, straight design.Matte rolled brass or rolled chromed finish.
Short-linked, calibrated quality anchor chain of grade 4, according to DIN 766A (true to gauge). The chain is machine-welded and cleanly hot-dip galvanised.The breaking load of this chain is 20 % to 25 % higher than the DIN values for grade 3. Supplied as a whole bundle with a fixed length. Chains under 20 metres are supplied by the metre (see "Similar products" further down this page).All chains are provided with enlarged end links on both sides, which allows easy shackling of the anchor or an anchor cable.On request, this chain is also available as a bundle according to EN 24565(ISO 4565).
Short-link, calibrated forerunning chain according to DIN766 (true to gauge) in ready-made length.The grade 4 precursor is machine-welded and cleanly galvanised.The breaking load of this quality chain G40 is 20 to 25 percent higher than the DIN values for quality class 3.The chain is equipped with enlarged end links at both ends, which makes it easy to shackle to the anchor and the anchor line.
Triangular transom hawsehole or stern pipe.Made of polished stainless steel.
Side hawse hole, oval design with stainless steel stay bolts. Made from polished stainless steel (AISI 316).
Chain stopper.AISI 316 (A4) stainless steel. To relieve the strain on the anchor windlass.The axle of the foldable flap is an easily removed fast pin. The chain can therefore be fitted into the stopper without problem.
Long hook with hand grip to hold the boat near slippery steps and rings, helps in locks and other mooring situations.Strong stainless steel rod (D = 10 mm) with handle.
Practical hook as a mooring aid, for example when mooring in locks, on dolphins, on bollards or to hold the ship on slippery stairs and rings. Strong V4A stainless steel round material (D = 10 mm) with welded line eye.
Short hook to hold the boat near slippery steps and rings, helps in locks and and other mooring situations.Strong stainless steel rod (D = 10 mm) with handle.
Pad eye made from polished investment-cast stainless steel (V4A).Long-oval mounting plate.
