Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Strong padeye with rhomboid mounting plate.Polished investment-cast stainless steel (V4A).
Claw hook made of A4 stainless steel round material, cleanly polished.A ring is welded to the hook.
Two part pipe clamp from stainless steel for fitting with two scews, washers and nuts
Cast stainless steel snap-shackles, polished.With safety latch.Inexpensive design.
Smart flag staff socket that can be attached to the after railing like a bracket.Made from brass, with polished or chromed finish.The flag staff is secured with a knurled screw.For flag staff diameter D = 20 mm, for railings D = 22-25 mm.
Midweight, knotless, woven plyester net of 2 mm thick yarn with approx. 5 mm bolt rope woven in.The 50 x 50 mm wide mesh lies diagonally, because of which the net can be spread to a width of 50 cm to about 70 cm.The net is sold loose by the running meter of stretched length.Please note: Because of the diagonal mesh, the net will be shortened by about 15-25% if pulled out to its full width.To obtain the best graduated price for a full spool of 100 m, please order a length which can be divided by 100.
Classic boom fitting for sailing boats and small yachts with roller-reefing (with turning booms). The boom claw has four nylon rings to protect the boom and the sail.For simple sheet leads, use just one boom claw.By combining two boom claws, a complete, strong sheet car (lenght 300 mm) with three purchase points can be mounted, on which the mainsheet can be attached. Deliverable in two versions: a small one made from brass, cleanly polished or a bigger one made from aluminium bronze
Fairlead made from stainless steel 1.4401 (AISI 316) with stainless steel thimble.
Turning knob for steering wheels, made from hand-polished stainless steel.The included stainless steel bracket allows mounting on spokes or the outer ring (D = approx. 20 mm). Knob diameter 38 mm, bolts 5/16" x 15 mm.
Fixed teak handle that is bolted to the steering wheel. Handle length 110 mm, bolt M10 x 70 mm.
Appealing turning handle made from varnished teak with a stainless steel cap.A stainless steel clamp allows simple mounting on the outer ring of the steering wheel.The diameter of the ring must be at least 30 mm,turning handle D = 58 mm,bolt M10 x 13 mm.
Solid aluminum fold-down cleat. Smooth form with lightly rounded top. When retracted, this cleat lies flat on the deck, without any protrusions or edges. Ideal for use as spring-line cleats. The countersunk fastener holes in the mounting plate are appropriate for use with machine screws M10. These cleats also make excellent handles.
The classic motorboat cleat: Two-footed torpedo-cleat. Slender design.Complete with two stainless steel bolts and nuts.Polished or chromed brass finish.
Cleanly worked fitting of stainless steel, with which tiller extensions can be attached on the tiller so they will pivot and turn. At 13 mm wide, the tiller joint is so thin that it can be used on wood, aluminum or carbon fiber tiller extensions. Dimensions:Base plate 50 x 20 mm.
Heavy bollard with slightly angled arms.Made from cast brass, polished or chromed finish.The bollard is attached invisibly from underneath.Comes complete with two stainless steel stud bolts and nuts that are securely screwed into blind holes.
Plastic pressure tank which generates constant flow to the pressure-water system with limited pumping intervals and power draw. The tanks have an interior rubber diaphragm with preset pressure cushion and a SCHRADER vent to create the pressure.Connection 1/2" BSP.Max. pressure 10 bar.
The proven AQUA BON is made of a robust plastic housing with a cellulose activated carbon filter insert (5 Micron).Filters sediment out, removes bad smells, chlorine and chemicals.Fittings 3/8" internal thread. Comes with a matching plastic hose nozzlefor 13 mm hoses and wall-mounting bail.Duration of 1 filter cartridge: 1 year (or after 5000 or 10000 litres of use, depending on size).The filters are designed for use in the pressurised area. Max. Working pressure 6.8 bar. Temperature range 0 - 52°C.Replacement filters are available. See under accesories.
Spare cartridges for drinking water filter AQUA BON. Lasts 1 year or 5000 or 10000 litres of use, depending on size.
Singe sheave, ball bearing HARKEN OPTIMIST Sprit block with hook. The block is made of nylon, the hook and the sheave are made of stainless steel.
Single sheave, ball bearing ALLEN sprit block. The block is made of stainless steel (AISI316)
Single sheave sprit block. Sheave made of nylon, cheeks made of stainless steel (AISI 316).
Ball bearing block with eye. Made of glass fiber filled nylon and stainless steel.
