Calibrated anchorchain hot-dip galvanized, in bunches | TOPLICHT

To be able to use the full range of Shopware 6, we recommend activating Javascript in your browser.

Jobs

Catalogue

Art. No.	Glieder	length (m)	D (mm)	T (mm)	B (mm)	BRL (kN)	Gewicht (kg/m)	Price (unit)	Delivery time	Note list	Buy
No products found.

Downloads

Datenblatt

Short-linked, calibrated quality anchor chain of grade 4, according to DIN 766A (true to gauge). The chain is machine-welded and cleanly hot-dip galvanised.

The breaking load of this chain is 20 % to 25 % higher than the DIN values for grade 3.

Supplied as a whole bundle with a fixed length.

Chains under 20 metres are supplied by the metre (see "Similar products" further down this page).

All chains are provided with enlarged end links on both sides, which allows easy shackling of the anchor or an anchor cable.

On request, this chain is also available as a bundle according to EN 24565(ISO 4565).

Description

Short-linked, calibrated quality anchor chain of grade 4, according to DIN 766A (true to gauge). The chain is machine-welded and cleanly hot-dip galvanised.

The breaking load of this chain is 20 % to 25 % higher than the DIN values for grade 3.

Supplied as a whole bundle with a fixed length.

Chains under 20 metres are supplied by the metre (see "Similar products" further down this page).

All chains are provided with enlarged end links on both sides, which allows easy shackling of the anchor or an anchor cable.

On request, this chain is also available as a bundle according to EN 24565(ISO 4565).

Downloads

Datenblatt

Questions about the product?

Similar products

Calibrated chain DIN 766A hot-dip galvanized, sold by metre

Calibrated chain DIN 766A hot-dip galvanized, sold by metre

Short-linked, calibrated quality anchor chain of grade 4, according to DIN 766A (true to gauge). The chain is machine-welded and cleanly hot-dip galvanised.The breaking load of this chain is 20 % to 25 % higher than the DIN values for grade 3.Available by the metre in lengths of up to 20 metres.We also supply this chain as a bundle in fixed lengths from 30 metres (see "Similar products" further down on this page).On request, this chain is also available by the metre in accordance with EN 24565(ISO 4565).

From €5.95 *

More products from the category Chains

DUPLEX CROMOX Stainless Steel Chain E-polished

DUPLEX CROMOX Stainless Steel Chain E-polished

Short-link anchor chain made of the particularly high-strength DUPLEX stainless steel alloy 1.4462 (AISI 318LN ), grade 6. Calibrated and true to gauge according to DIN 766A. The chain has high corrosion resistance in salt water, even at high water temperatures up to 35° (PRE value approx. 34). The surface is electropolished.Delivery in whole bundles from 20 m length (made up according to your length specification) or in shorter lengths loose per meter. Each bundle is delivered with a works certificate according to EN 10204-2.2. Delivery time approx. 3 weeks.CROMOX stainless steel anchor chains reach their maximum corrosion resistance in electropolished condition. During electropolishing, the surface is microscopically smoothed by electrochemical material. In addition, chromium and nickel accumulate on the surface, resulting in the formation of a resistant passive layer. This combination of minimal surface area with an optimal passive layer results in excellent corrosion resistance. KETTEN WÄLDER offers a 3-year corrosion protection guarantee on these chains.CROMOX anchor chains are produced in Germany by KETTEN WÄLDER. These chains offer maximum safety due to a particularly high breaking force, or a significant weight saving, since a smaller chain diameter can be used for the same breaking force. They fall easily and lay well in the chain case. The surface of the chains is very smooth, so that there is little adhesion of silt and sand, and thus hardly any dirt and fouling problems.This chain is also available with a plain polished, bright surface (see matching articles).A true to gauge chain according to ISO4565 is also available on request.

From €46.90 *

GRADE 70 High-tensile hot-dip galvanised anchor chain

GRADE 70 High-tensile hot-dip galvanised anchor chain

Tempered chain (grade 7) made of high-strength special steel: short link, tested, calibrated and gauge-compliant in accordance with DIN 766A, hot-dip galvanised.This chain, which was formerly offered as AQUA7, achieves extremely high breaking loads (70 kN at 8 mm and 101 kN at 10 mm). This makes it the ideal chain for long-distance sailors to optimise anchor equipment in terms of chain length and chain weight.The use of a high-strength grade 7 chain connecting link is recommended as a large end link.Each chain is supplied with a DIN EN 10204 2.2 certificate.

From €735.00 *

Quality forerunner chain DIN766A hot-dip galvanised

Quality forerunner chain DIN766A hot-dip galvanised

Short-link, calibrated forerunning chain according to DIN766 (true to gauge) in ready-made length.The grade 4 precursor is machine-welded and cleanly galvanised.The breaking load of this quality chain G40 is 20 to 25 percent higher than the DIN values for quality class 3.The chain is equipped with enlarged end links at both ends, which makes it easy to shackle to the anchor and the anchor line.

From €46.76 *

Universal forerunner chain DIN766A hot-dip galvanised

Universal forerunner chain DIN766A hot-dip galvanised

Forerunning chain with short links (similar to DIN766) in ready-made length.The precursor made of universal chain (import quality) is hot-dip galvanised.The chain is provided with enlarged end links at both ends, which enables unproblematic shackling to the anchor and anchor line.

From €22.00 *

Universal forerunner chain DIN766A, stainless steel

Universal forerunner chain DIN766A, stainless steel

Forerunning chain with short links in ready-made length.The chain complies with DIN 766A. It is made of A4 stainless steel and machine-welded. The breaking load of this chain is 20 to 25 percent higher than the DIN values for grade 3. The forerunner is already provided with enlarged end links at both ends, which allows the anchor and anchor line to be shackled without any problems.

From €63.80 *

Anchorchain hot-dip galvanized, short-link

Anchorchain hot-dip galvanized, short-link

Preisgünstige, universell einsetzbare Kette (Importqualität) für verschiedene Anwendungsbereiche.Kurzgliedrig, ähnlich DIN 766 (geringe Maßabweichungen sind möglich), aus feuerverzinktem Stahl.The anchor chain is available as loose yard goods up to a maximum length of 49 metres.Or as a bundle with a length of 50 metres. From the bundle length onwards, the cheaper price per metre applies.Lengths longer than the bundle length are supplied in two pieces (bundle plus remaining length).

From €2.80 *

Anchorchain stainless steel, short-link

Anchorchain stainless steel, short-link

Inexpensive, universally applicable chain (import quality) for various applications.Long link, similar to DIN 763 (minor dimensional deviations are possible), made of stainless steel (AISI316).The anchor chain is available as loose yard goods up to a maximum length of 49 metres. Or as a bundle with a length of 50 metres. From the bundle length onwards, the cheaper price per metre applies. Lengths longer than the bundle length are supplied in two pieces (bundle plus remaining length).

From €3.70 *

Calibrated anchorchain hot-dip galvanized, in bunches

Calibrated anchorchain hot-dip galvanized, in bunches

Short-linked, calibrated quality anchor chain of grade 4, according to DIN 766A (true to gauge). The chain is machine-welded and cleanly hot-dip galvanised.The breaking load of this chain is 20 % to 25 % higher than the DIN values for grade 3. Supplied as a whole bundle with a fixed length. Chains under 20 metres are supplied by the metre (see "Similar products" further down this page).All chains are provided with enlarged end links on both sides, which allows easy shackling of the anchor or an anchor cable.On request, this chain is also available as a bundle according to EN 24565(ISO 4565).

From €163.49 *

Calibrated chain DIN 766A hot-dip galvanized, sold by metre

Calibrated chain DIN 766A hot-dip galvanized, sold by metre

Short-linked, calibrated quality anchor chain of grade 4, according to DIN 766A (true to gauge). The chain is machine-welded and cleanly hot-dip galvanised.The breaking load of this chain is 20 % to 25 % higher than the DIN values for grade 3.Available by the metre in lengths of up to 20 metres.We also supply this chain as a bundle in fixed lengths from 30 metres (see "Similar products" further down on this page).On request, this chain is also available by the metre in accordance with EN 24565(ISO 4565).

From €5.95 *

Chain hot-dip galvanized steel, long-link

Chain hot-dip galvanized steel, long-link

Inexpensive, universally applicable chain (import quality) for various applications.Long link, similar to DIN 763 (minor dimensional deviations are possible), made of hot-dip galvanised steel.The chain is available as loose yard goods up to a maximum length of 29 metres. Or as a bundle with a length of 30 metres. From the bundle length onwards, the cheaper price per metre applies.Lengths longer than the bundle length are supplied in two pieces (bundle plus remaining length).

From €2.70 *

Chain stainless steel, long-link

Chain stainless steel, long-link

Inexpensive, universally applicable chain (import quality) for various applications.Long link, similar to DIN 763 (minor dimensional deviations are possible), made of stainless steel (AISI316).The chain is available as loose yard goods up to a maximum length of 49 metres.Or as a bundle with a length of 50 metres. From the bundle length onwards, the cheaper price per metre applies.Lengths longer than the bundle length are supplied in two pieces (bundle plus remaining length).

From €3.70 *

CROMOX chain forerunner DUPLEX stainless steel

CROMOX chain forerunner DUPLEX stainless steel

Chain foregoer made from high strength DUPLEX stainless steel 1.4462 quality grade 6. Made by Ketten-Wälder in Germany. This chain exhibits a very high corrosion resistiveness (resistant to 35°C water temperature). Breaking loads are reached which are more as twice as high as those or normal glavanized chain.Each length is 5,00 m - provided with larger end links on both ends, through which it is possible to run a shackle, surface shiny.

From €235.00 *

CROMOX chain stainless steel bright polished GK6

CROMOX chain stainless steel bright polished GK6

Short-link anchor chain made of high-strength stainless steel 1.4404 (AISI 316L), grade 6. Calibrated and true to gauge according to DIN 766A. The chain has high corrosion resistance in salt water, even at high water temperatures up to 28° (PRE value approx. 25). The surface is bright.Minimum order quantity 20 m. Delivery in whole bundles from 20 m length - made up according to your length specification. Each bundle is supplied with a certificate according to EN 10204-2.2. Delivery time approx. 3 weeks. CROMOX anchor chains are produced in Germany by KETTEN WÄLDER. These chains offer the highest level of safety due to their particularly high breaking strength, or a significant weight saving, since a smaller chain diameter can be used for the same breaking strength. They fall easily and lay well in the chain case.The surface of the chains is smooth, so there is only minimal adhesion of silt and sand, and thus hardly any dirt and fouling problems.This chain is also available with an electropolished surface (see matching articles).A true to gauge chain according to ISO4565 is also available on request.

From €48.50 *

CROMOX chain stainless steel electro-polished GK6

CROMOX chain stainless steel electro-polished GK6

Short-link anchor chain made of high-strength stainless steel 1.4404 (AISI 316L), grade 6. Calibrated and true to gauge according to DIN 766A. The chain has high corrosion resistance in salt water, even at high water temperatures up to 28° (PRE value approx. 25). The surface is electropolished.Minimum order quantity 20 m. Delivery in whole bundles from 20 m length - made up according to your length specification. Each bundle is supplied with a certificate according to EN 10204-2.2. Delivery time approx. 3 weeks.CROMOX stainless steel anchor chains reach their maximum corrosion resistance in electropolished condition. During electropolishing, the surface is microscopically smoothed by electrochemical material. In addition, chromium and nickel accumulate on the surface, resulting in the formation of a resistant passive layer. This combination of minimum surface area with optimum passive layer results in excellent corrosion resistance.CROMOX anchor chains are produced in Germany by KETTEN WÄLDER. These chains offer maximum safety due to a particularly high breaking force, or a significant weight saving, since a smaller chain diameter can be used for the same breaking force. They fall easily and lay well in the chain case. The surface of the chains is very smooth, so that there is little adhesion of silt and sand, and thus hardly any dirt and fouling problems.This chain is also available with a plain polished, bright surface (see matching articles).A true to gauge chain according to ISO4565 is also available on request.

From €58.50 *

CROMOX DUPLEX chain stainless steel bright poliert GK6

CROMOX DUPLEX chain stainless steel bright poliert GK6

Short-link anchor chain made of the particularly high-strength DUPLEX stainless steel alloy 1.4462 (AISI 318LN ), grade 6. Calibrated and true to gauge according to DIN 766A. The chain has high corrosion resistance in salt water, even at high water temperatures up to 35° (PRE value approx. 34). The surface is bright.Minimum order quantity 20 m. Delivery is made in whole bundles from 20 m length, made up according to your length specification. Each bundle is supplied with a works certificate according to EN 10204-2.2. Delivery time approx. 3 weeks. CROMOX anchor chains are produced in Germany by KETTEN WÄLDER. These chains offer the highest level of safety due to their particularly high breaking strength, or a significant weight saving, since a smaller chain diameter can be used for the same breaking strength. They fall easily and lay well in the chain case. The surface of the chain is smooth, so there is little adhesion of silt and sand, and thus hardly any dirt and fouling problems.This chain is also available with electropolished surface (see matching articles). We can also supply electropolished chain in shorter lengths.A true to gauge chain according to ISO4565 is also available on request.

From €39.00 *

DUPLEX CROMOX Stainless Steel Chain E-polished

DUPLEX CROMOX Stainless Steel Chain E-polished

Short-link anchor chain made of the particularly high-strength DUPLEX stainless steel alloy 1.4462 (AISI 318LN ), grade 6. Calibrated and true to gauge according to DIN 766A. The chain has high corrosion resistance in salt water, even at high water temperatures up to 35° (PRE value approx. 34). The surface is electropolished.Delivery in whole bundles from 20 m length (made up according to your length specification) or in shorter lengths loose per meter. Each bundle is delivered with a works certificate according to EN 10204-2.2. Delivery time approx. 3 weeks.CROMOX stainless steel anchor chains reach their maximum corrosion resistance in electropolished condition. During electropolishing, the surface is microscopically smoothed by electrochemical material. In addition, chromium and nickel accumulate on the surface, resulting in the formation of a resistant passive layer. This combination of minimal surface area with an optimal passive layer results in excellent corrosion resistance. KETTEN WÄLDER offers a 3-year corrosion protection guarantee on these chains.CROMOX anchor chains are produced in Germany by KETTEN WÄLDER. These chains offer maximum safety due to a particularly high breaking force, or a significant weight saving, since a smaller chain diameter can be used for the same breaking force. They fall easily and lay well in the chain case. The surface of the chains is very smooth, so that there is little adhesion of silt and sand, and thus hardly any dirt and fouling problems.This chain is also available with a plain polished, bright surface (see matching articles).A true to gauge chain according to ISO4565 is also available on request.

From €46.90 *

GRADE 70 High-tensile hot-dip galvanised anchor chain

GRADE 70 High-tensile hot-dip galvanised anchor chain

Tempered chain (grade 7) made of high-strength special steel: short link, tested, calibrated and gauge-compliant in accordance with DIN 766A, hot-dip galvanised.This chain, which was formerly offered as AQUA7, achieves extremely high breaking loads (70 kN at 8 mm and 101 kN at 10 mm). This makes it the ideal chain for long-distance sailors to optimise anchor equipment in terms of chain length and chain weight.The use of a high-strength grade 7 chain connecting link is recommended as a large end link.Each chain is supplied with a DIN EN 10204 2.2 certificate.

From €735.00 *

Quality forerunner chain DIN766A hot-dip galvanised

Quality forerunner chain DIN766A hot-dip galvanised

Short-link, calibrated forerunning chain according to DIN766 (true to gauge) in ready-made length.The grade 4 precursor is machine-welded and cleanly galvanised.The breaking load of this quality chain G40 is 20 to 25 percent higher than the DIN values for quality class 3.The chain is equipped with enlarged end links at both ends, which makes it easy to shackle to the anchor and the anchor line.

From €46.76 *

Universal forerunner chain DIN766A hot-dip galvanised

Universal forerunner chain DIN766A hot-dip galvanised

Forerunning chain with short links (similar to DIN766) in ready-made length.The precursor made of universal chain (import quality) is hot-dip galvanised.The chain is provided with enlarged end links at both ends, which enables unproblematic shackling to the anchor and anchor line.

From €22.00 *

Universal forerunner chain DIN766A, stainless steel

Universal forerunner chain DIN766A, stainless steel

Forerunning chain with short links in ready-made length.The chain complies with DIN 766A. It is made of A4 stainless steel and machine-welded. The breaking load of this chain is 20 to 25 percent higher than the DIN values for grade 3. The forerunner is already provided with enlarged end links at both ends, which allows the anchor and anchor line to be shackled without any problems.

From €63.80 *

Anchorchain hot-dip galvanized, short-link

Anchorchain hot-dip galvanized, short-link

Preisgünstige, universell einsetzbare Kette (Importqualität) für verschiedene Anwendungsbereiche.Kurzgliedrig, ähnlich DIN 766 (geringe Maßabweichungen sind möglich), aus feuerverzinktem Stahl.The anchor chain is available as loose yard goods up to a maximum length of 49 metres.Or as a bundle with a length of 50 metres. From the bundle length onwards, the cheaper price per metre applies.Lengths longer than the bundle length are supplied in two pieces (bundle plus remaining length).

From €2.80 *

Anchorchain stainless steel, short-link

Anchorchain stainless steel, short-link

Inexpensive, universally applicable chain (import quality) for various applications.Long link, similar to DIN 763 (minor dimensional deviations are possible), made of stainless steel (AISI316).The anchor chain is available as loose yard goods up to a maximum length of 49 metres. Or as a bundle with a length of 50 metres. From the bundle length onwards, the cheaper price per metre applies. Lengths longer than the bundle length are supplied in two pieces (bundle plus remaining length).

From €3.70 *

Calibrated anchorchain hot-dip galvanized, in bunches

Calibrated anchorchain hot-dip galvanized, in bunches

Short-linked, calibrated quality anchor chain of grade 4, according to DIN 766A (true to gauge). The chain is machine-welded and cleanly hot-dip galvanised.The breaking load of this chain is 20 % to 25 % higher than the DIN values for grade 3. Supplied as a whole bundle with a fixed length. Chains under 20 metres are supplied by the metre (see "Similar products" further down this page).All chains are provided with enlarged end links on both sides, which allows easy shackling of the anchor or an anchor cable.On request, this chain is also available as a bundle according to EN 24565(ISO 4565).

From €163.49 *

Calibrated chain DIN 766A hot-dip galvanized, sold by metre

Calibrated chain DIN 766A hot-dip galvanized, sold by metre

Short-linked, calibrated quality anchor chain of grade 4, according to DIN 766A (true to gauge). The chain is machine-welded and cleanly hot-dip galvanised.The breaking load of this chain is 20 % to 25 % higher than the DIN values for grade 3.Available by the metre in lengths of up to 20 metres.We also supply this chain as a bundle in fixed lengths from 30 metres (see "Similar products" further down on this page).On request, this chain is also available by the metre in accordance with EN 24565(ISO 4565).

From €5.95 *

Chain hot-dip galvanized steel, long-link

Chain hot-dip galvanized steel, long-link

Inexpensive, universally applicable chain (import quality) for various applications.Long link, similar to DIN 763 (minor dimensional deviations are possible), made of hot-dip galvanised steel.The chain is available as loose yard goods up to a maximum length of 29 metres. Or as a bundle with a length of 30 metres. From the bundle length onwards, the cheaper price per metre applies.Lengths longer than the bundle length are supplied in two pieces (bundle plus remaining length).

From €2.70 *

Zuletzt angesehene Artikel

Request sent successfully

Request wasn't send - a error occured. Please try again.