Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
CEE angle socket 230 volt, 16 Ampere, 3 poles, IP44 splash water proofed, length 80 mm.A responsibly made shore power connection requires a clean and safe cable run. If a standard CEE plug is too long due to the installation situation of the socket or the cable has to be routed in too narrow bending radii, a CEE angle plug with cable sleeve protection can be helpful. In this case, the plug can be inserted more easily and the cable will not be damaged by kinking.
230 volt adapter cable for taking over shore power. The 0.5 m adapter cable is IP44 splash-proof, 3-pole and can carry up to 16A. It carries a CEE plug on the input side and a NEMA L6 socket with locking ring and protective cap on the output side. The NEMA socket also features a LED power indicator. The moulded connectors are not dismountable.NEMA connectors are a series of different types of connectors named after the National Electrical Manufacturers Association. They are mainly used in America, and in some parts of Asia. The number of contacts and the pin assignment are primarily designed for the single-phase three-wire network that is common in these regions. Individual plugs of the standard are available in a version with a rotatable locking device housed in the socket, which is identified by the letter L. The purpose of the locking device is to prevent the plug from being pulled or from accidentally slipping out of the socket.
High-quality, waterproof CEE socket suitable for shore connection CEE surface-mounted plug (item no. 4671-053), 230 Volt, 16 Ampére, 3 poles, IP67 rating.The shore power socket consists of a one-piece housing with bayonet fitting and robust hinged cap with internal sealing ring. The hinged cap has a bayonet lock. The coupling socket can be closed watertight by turning it. Standard 230V CEE plugs can be inserted into the socket without any problems. However, a waterproof connection is not given in this case.
A reliable shore power cable is required to take over shore power. It must be able to withstand the sometimes unfavourable conditions in harbours or marinas and be easy to lay out and fold up. A clearly visible colour reduces the risk of overlooking the cable and tripping over it.The 230 V shore power cable is made of yellow PUR (polyurethane) cable type H07BQ-F. This extremely robust cable type can withstand even the highest loads and is therefore also used in the construction industry, agriculture and in particularly harsh environments. The CEE plug and the CEE coupling with hinged cover are moulded onto the cable to make it watertight. The load capacity of the cable is 16 amps.Technical dataFlexible, but less suitable for tight bending radii than rubber-sheathed cable (see ´Similar products´)High elasticity, but stiffer than rubber cable and therefore somewhat more difficult to foldHighest abrasion resistance, cut and notch resistantVery good resistance to oil, grease, petrol, seawater, chemicalsExcellent weather resistance (UV radiation, ozone)Can be used in a temperature range of approx. -40 °C to +90 °C
Rigid solar panels in a seawaterproof anodized aluminum profile frame, ideal for mounting on decks or on an equipment rack. The cells are embedded in EVA compound and well protected by a hardened protectif front glass.With a waterproof (IP65), rear-mounted junction box and a 2 m connection cable, the solar module is pre-assembled for direct connection to a charge controller.36 high-performance silicon crystalline (c-Si) cells with integrated bypass diodes ensure a high yield.Multiple modules can be connected parallel to increase power.For 12 volt battery voltage.
Three-core cable with bare copper wires with rubber cover. The wires are stranded and also insulated with rubber. Well suited for connecting electrical appliances such as soldering irons, drills, kitchen appliances, vacuum cleaners, etc.Specifications:Type H05RR-FNorm VDE 282-4Nominal voltage 300/500 Vinsulating/sheath material EPR/EPRflame resistance DIN EN 50265-2-1Color blackcopper base 150We also supply whole rolls of 50 m at a graduated price. To get the favorable graduated price, please order a number of meters divisible by 50.
Battery main switch for front or rear installation (panel mounting) or surface mounting.Also suitable for high currents: Continuous load 300 A, short-term <30 s 900 A, maximum up to 32 V. Connection via tin-plated M10 copper threads.Protection class IP66.The article is available in five versions with different switching functions:Article 4220-6006 (Type BHM300) Off/OnArticle 4220-6008 (Type BWS303) Off/Battery 1/Battery 2Article 4220-6007 (Type BWS304) Off/Battery 1/Battery 2/Battery 1+2Article 4220-6010 (Type BHM220) 2 x Off/2 x On (2-pole for two separate circuits)Article 4220-6011 (Type BHM230) like BMH220 and additionally combine 2 circlesMounting hole: ⌀ 59 mm for mounting from rear (panel mounting), ⌀ 67 mm for mounting from front.Assembly dimensions L x W x H: 72 x 72 x 55 mm.
Sicherungshalter und Verteiler für Flachsicherungen zur direkten Montage auf dem Batterie-Pluspol. Kabelanschluss für Verbraucher über M4 Schraubklemmen. Transparente Abdeckung mit Beschriftungsfeldern. Strombelastbarkeit: 100 A pro Block, 30 A pro Stromkreis.Lieferung erfolgt ohne Sicherungen.
USB combination socket for charging USB devices. High-quality design for recessing (max. wall thickness ca. 18mm).Input voltage 12 V or 24 V, output voltage 5 V.
Mechanical professional tool for professional crimping of tubular cable lugs and connectors. Rotatable profile discs are used to select the required cross-section.
The NMEA2000 starter kit contains all the components required for a functioning NMEA2000 network. The trunk line (backbone) created from the components can be extended with additional distributors or connecting cables (see accessories).The NMEA2000 starter kit consists of2 x NMEA2000 cable 2m1 x NMEA2000 T-piece1 x NMEA2000 power connection cable 2m1 x set of NMEA2000 terminating resistors (male and female)
NMEA2000 2-way distributor for creating distribution points within an NMEA2000 network.
NMEA2000 4-way distributor for creating distribution points within an NMEA2000 network.
Power cable with T-piece incl. fuse to supply power to the NMEA2000 network. Cable length 2m.
NMAE2000 connector with screw contacts for self-assembly or repair of NMEA2000 cables.
Current delivery notice: BENAR OIL CLEAR is currently not available. Please switch to alternative products such as BENAR UVR (2092-750) or varnish oils from OWATROL, LE TONKINOIS or EPIFANES.BENAR GLOSS is a high-gloss wood oil based on long-oil alkyd resin for the care and preservation of tropical and domestic hardwoods. The product forms an elastic, breathable protective film with good water vapor permeability and is suitable for use on surfaces with low UV exposure indoors and outdoors. The amber-colored varnish oil penetrates deeply into the wood and provides long-lasting protection against weathering. The high elasticity of the varnish oil additionally prevents flaking or chipping. This makes BENAR oil also very well suited for "working" solid woods. Application: Apply with a brush to clean, dry, grease-free surfaces. For highly absorbent and fungus-prone woods, a prior impregnation with IMP Impregnation Oil (Art.No. 2090-001) is recommended. Apply the first coat thinned (max. 15% white spirit substitute), further coats unthinned. Then apply at least three more unthinned coats outdoors (three coats are sufficient indoors). If a matte surface is desired, BENAR OIL MATT (Art.No. 2094-750) must be applied as the final coat. For soft and light-sensitive woods and for horizontal surfaces exposed to strong sunlight outdoors, we recommend BENAR OIL UVR (Art.No. 2092-003).Technical DataApplication area: Wood protection oil for indoor and outdoor useSubstrate: Clean, dry, load-bearing; max. 18% wood moisturePrimer: IMP Impregnation OilCoverage: 14–16 m²/l per coatThinning: White spirit substitute (only for first coat)Application method: Brush or airless (professional users)Drying times (at 23 °C): Dust-dry after approx. 6 hrs, recoatable after 24 hrsSafety note: Always use personal protective equipment during application. Further information on application can be found in the Technical Data Sheet under 'Downloads'.The shipping of this product is only possible in accordance with the Chemicals Prohibition Ordinance to resellers, professional users and public research and educational institutions.Do you belong to this customer group? Then send us your request here. We will gladly prepare a delivery offer for you.For private users, delivery is only possible in our Hamburg store against proof of use.
Availability information: BENAR ÖL MATT is currently out of stock; remaining stock is being sold off. The alternative product is BENAR UVR (2092-750).BENAR MATT is a clear wood oil based on long-oil alkyd resin for achieving a matte finish as a final coat on other BENAR products such as BENAR GLOSS (Art.No.2091-003). The product forms a matte, breathable protective film with good water vapor permeability and is suitable for use on surfaces with little UV exposure, both indoors and outdoors. Application: Apply with a brush on clean, dry, grease-free surfaces. Technical DataArea of application: matte wood protection oil for indoor and outdoor useSubstrate: surfaces coated with BENARCoverage: 14-16 m²/l per coatThinning: noneApplication method: brush or airless (professional users)Drying times (at 23 °C): dust-dry after approx. 6 hrs, recoatable after 24 hrsSafety Note: Always use personal protective equipment during application. For more information on application, please refer to the Technical Data Sheet under 'Downloads'.The shipment of this product is only possible to resellers, professional users, and public research and educational institutions in accordance with the Chemicals Prohibition Ordinance.Are you part of this customer group? Then send us your inquiry here. We will be happy to provide you with a delivery offer.For private users, sale is only possible in our retail store in Hamburg upon proof of intended use.
BENAR UVR is a high-gloss wood oil based on long oil alkyd resin with an additional red-brown pigmented UV filter for outdoor use. It was specially developed for tropical and European hardwoods such as teak, mahogany or oak and forms an elastic, breathable protective film with very good weather resistance. The high vapor permeability prevents moisture from being trapped under the varnish film and thus prevents rotting. The high elasticity  
Reasonably priced working line made from polypropylene split fibre, 3 strand laid according to EN ISO 1346.Floatable and easily spliced.Colours: white, blue or orange.Comes as 220 m hawser.
Floatable docklines of multifilliment Polypropylene (PPM-) - fibers.This fine, pliant fiber is difficult to distinguish visually from polyester or polyamid fibers, doesn't absorb water and doesn't harden over time. Good UV-resistance.A three-strand construction. The line of working boats from EN ISO 1346A, with good cost effectiveness.Color: black.220m coils. You will find PP-MULTI line sold by the metre under "Suitable Items" at the bottom of this page.
Hemp-colored rope, looks like natural hemp rope. With it's "wooly" cover, this line is remarkably grippy, soft and has a very good hand. this hemp-like cover gives SPLEITEKS a fine, costly spun decorative line of raw polypropylene (PP). In contrast to natural hemp PP is absolutely decay resistant, flotable and stays smooth.Three-strand traditional rope ideal for ropeways. Splices well. SPLEITEKS has a higher stretch and a notably lower strength than other synthetic rope and is not at home in strong sunlight, and is therefore not intended for all applications. The preferred rope for all lines, for which grip is important and which is not required to hold large weights of a long time, works well, for example, on small boats, daysailers, workboats, throwing lines, and anywhere that authenticity is required. As alternative for high-sunlight areas we propose: ROBLINE-SPUNFLEX rope.
Strong and relatively soft rope intended as fender rope for ships or dinghies. Laid rope made of waterproof, hemp-colored polypropylene PP- staple fibres (SPLEITEX). Shipping as 220m coil. Available also in bulk, whole metres only.
Practical, reasonably priced standby paddle with blade and handle made of yellow plastic.Collapsed only 570 mm long, the aluminum handle is telescopic and weighs only 480 g.Dimensions blade: 170 x 300 mm.
