Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Round brass grommets, with matching discs. Polished brass or nickeled finish.Professional quality.Sizes 20 and 25 conform to DIN7332).Matching hole punch and stamping tool available.
Diagram paper for the BARIGO barographs 2015, 2018 and 2020.Suitable for our TOPLICHT articles 4408-018, 4408-019, 4408-020.Dimensions: 235 x 56 mm.Contents: 53 individual sheets, sufficient for 1 year.BARIGO article number: DIA120
Folding base for top light masts, flagstaff, etc. made from stainless steel 1.4401.Fitting pipes of 22 mm external diameter. Equipped with a 7 mm cable outlet in the lower area of the pipe support for internal cable routing.The pipe is fixed and evened out with six stud screws.The desired angle is adjusted and fastened with the ring gear.
The brass all-around light mounts on this brass mast (D = 20 mm). The brass tube is available in two different, cuttable lengths (580 or 1080 mm). The brass mast foot comes predrilled with 4 holes. Polished- or chromed-brass designs. Comes complete with 12 V bulbs, Ba 15d, 20 W. Not BSH certified.
Tarred hemp twine (housing). The classic material for whipping and for a variety of other uses.Diameter approx. 4mm.For servicing the standing rigging of 14-20mm diam.Supplied in coils or spools. Tarred yarn has been used for centuries on sailing ships, to serve standing rigging, as well as for tying ratlines and hanks.In Scandinavia especially, the twine made from two yarns tarred caulk (Dansk Merling) is used for fancy work.MARLINE, made from 3 threads (when PP it is only made from 2 threads), is suitable for example for serving wires of 14mm maximum. HOUSING is made from 4 threads (when PP it is only made from 3 threads) and is commonly used for serving and tying in of ratlines. SPUNYARN is made from 7-8 threads and is mostly used to serve thick splicesAdditionly we offer a somewhat thinner 5-strand SPUNYARN which has been proven to serve wires from 20mm thickness. Historically these yarns are made from hemp which has to be impregnated in Swedish tar for conservation. Because wood tar is, unfortunately, washed out by rain and spindrift, the rig has to be newly tarred regularly.Nowadays the yarns may alternatively be made from rot-proof polypropylene (PP) staple fibre (SPLEITEKS). As a protection against UV rays these also have to be tarred now and then, but they forgive a lack of maintenance much better than natural fibres.
Brass fastener, on a plate with a variety of threaded-sleeve heights to match various material depths.Polished, rolled or chromed finish.
Displaceable smoke catcher for wall mounting.The blacker can be moved along its adjustment rod to fit various lamp sizes and set with a wing nut.Made entirely of polished brass.With solid adjustment rod.
Soft cloth fibres on a wound steel wire. The chimney cleaner fits for 10'''-20''' cylinders.
Telescopic gas pressure spring to open, close, lift, lower, dampen or adjust the opening of hatches, skylights, portholes, covers or windows. The cylinder has a diameter of 18 mm, the piston rod has a diameter of 8 mm.Different brackets are available for mounting. Mounting is very simple: the ends of the gas spring are snapped onto the heads of the brackets.
Ideal pump for changing the oil on board. The sturdy housing, transparent for checking the oil level, conceals a powerful vacuum pump.A few strokes generate a strong vacuum and allow oil to be sucked out of the engine via a plastic hose through the engine's dipstick opening. A shut-off function prevents the tank from overflowing.The device is completely maintenance-free and is supplied with 2 suction hoses D: 4.8 and D: 6.4 mm, length 1.2 m and a 1.0 m extension hose.
Especially comfortable and safe bosun's chair made of heavy nylon fabric. The hanging position is very well balanced and allows for safe work on the rig. Safe working load: max. 100 kg.Features:large, well-padded plywood seat board (45 x 30 cm),stainless steel thimbles,adjustable leg and back straps,extra downhaul and guide eye on the underside,strong, stitched-on side pockets.
These bells are die-cast from brass, the surface is brass polished or chrome plated. The sound is clear and very bright. They are lighter than sand cast bells.Supplied complete with bell holder and white ribbon.
Polished or chromed brass handle for opening ports. The cover snaps in place. Comes with backing plate for 4 mm threaded screws. With a bar on a threaded shaft for smooth tightening of the lock.
MED / SOLAS approval.McMURDO HRU Replacement Kit. The two variants replace the McMURDO Break t-HRU.The kit has been specially developed for replacement in EPIRBs from the manufacturer McMURDO. It consists of the Hammar hydrostatic water pressure release unit (HRU), the standard safety bolt (this must be replaced every time the release unit is replaced!), seals, screws and a safety clip with safety cord.The HRU for E3/G4/E5/G5 (82-962-0001A) fits the following EPIRBs (also from other manufacturers):McMURDO E5, G5, E3, G4, Rescue 406, Precision 406Kannad Marine EPIRB, SportPro, SportPro PlusSAILOR EPIRB I, EPIRB II, 406&GPS, SGE/SE 406-IIThe HRU for E8/G8 (23-145A) fits the following EPIRBs (also from other manufacturers):McMURDO Smartfind E8 AutoMcMURDO Smartfind G8McMURDO Smartfind G8 Auto AISKannad SafePro AIS AutoKannad SafePro AutoSailor 4065 EPIRB GNSS AutoSailor 4065 EPIRB AutoPrior to installation, the appropriate two year approval period mark (from installation) must be made on the HRU.Should the vessel sink, a spring-loaded blade in the HRU will cut the securing bolt at a water depth of 1.5 - 4 metres, allowing the EPIRB to float freely.
Made of polished or chromed brass, with round base plate. Light design with low overall height, for 25 mm tubing.
Calcium saponified grease according to DIN 51502, type KP2G-30 with EP (high pressure) additives and therefore suitable for use under high pressure and vibration.We recommend the grease as sterntube grease and water-resistant universal grease. The 400 ml cartridge size is also ideal for lubricating folding and rotary blade propellers using a grease gun via grease nipples.Specifications:extremely water-resistantvery good adhesion with a long-lasting lubricating film,long lubrication intervals due to very good ageing resistance,good fulling penetration (NLGI class 2)can be used at -30° to 120° C,The 400 g cartridge fits into standard grease guns.
Professional quality brush.Light Chinese bristle, 12th thickness. Wide, brass-plated metal frame, raw wooden handle.
High quality brass hinges with satin chromed surface.Made of drawn brass material, drilled and milled, with fixed brass pin.Â
Made from strong matte bronze for the hanging-up of rope, fenders, boat hooks, oars, etc.Delivery without the pictured cordage.
Light brass or chromed-brass design. This hatch fastener works like a frictional damper; By moving the practical handle the friction on the telescoping arm can be set at any height.Mounting plate 22 x 47 mm.
For skylights, locker seat and hatches: a strong stainless steel spring keeps the cover automatically open after lifting. A light squeeze sidewise is sufficient for closing.The large spring is equipped with black plastic mounts with four 5 mm bore holes, the 2 smaller springs with mounts from stainless steel with 2 mounting holes each.
This hemp line is a pure product of nature, built from stalks of the hemp plant.This was the most widespread rope type in Europe in the last centuries.Today this rope is used primarily inside, because it decays quickly when exposed to the elements. Our hemp rope (DIN83325) is made exclusively of long hemp threads.The rope comes untarred. (Also available tarred upon request).Available in cut lengths. Also available in 220 m lengths (see below).
Through-hull with flat abutting, polished flange. For countersinking. With ring for earth connection for earthing.Stainless steel, sea water proof, A4-steel, 1.4401 = AISI 316.Thread type: BSPThread form: parallelThe thread sizes are nominal sizes, they do not indicate the thread diameter.
