Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Straight chain inlet, made of heavy hand polished cast brass.The cover is loose with a slot for the chain and an attachment eye for a safety chain or safety lanyard.The deck flange of this hawse has a flat bar for recessing, for a secure fit in the deck.
Rust-free wire, made from stainless steel 1.4401 (AISI316).Very stiff and low stretch wire for shrouds and stays.Not able to be spliced.Not permanent in stock. Available per meter, also available in 125 m spools.
Very simple sailmaker's palm, made from soft leather. Laces with leather thongs.Steel needle plate sewn on.Simple design. Available right- or left-handed.
Traditional boom scissors made from ash wood.The crutch fits for dinghies and small cruisers.The resting boom height is around 80 cm, for boom diameter max. 90 mm.Made from ash battens 20 x 52 mm, sanded and oiled.Combines well with the bronze boom crutch sockets from DAVEY (please check "Suitable items").
The BUDDY CHAT Bluetooth helmet headset is used wherever people need to talk to each other but their hands are not free to press a talk button.Two or three users can communicate with each other over a distance of up to 1,000 meters (in an open field). The headsets (each weighing just 72 grams) can be attached to any type of helmet (construction helmets, bicycle helmets, ski helmets, etc.) using the brackets supplied.With the headset holder/single ear hook (see ‘Accessories’), the headset can also be used without a helmet. The NAUTIC TALK SL Bluetooth hands-free communication system (see ‘Similar products’) offers both options: on the helmet or with the single ear hook.The BUDDY CHAT system can be fully charged within two hours. Up to 1,000 hours of standby time or 10 hours of continuous conversation are then possible.Technical featuresBluetooth 3.0compatible with all helmetsRange up to 1000 m (free field)automatic volume controlwaterproof and dustproofcan be worn on either the left or right earautomatic reconnection after disconnectionup to 10 hours continuous talk time, 1000 hours standby timeDSP noise suppressionCell phone connection via BluetoothVoice dialingMicrophone mute functionScope of delivery (2x each for DUO, 3x each for TRIO)BUDDY CHAT module pre-programmedClamp mount for safety helmetAdhesive mount for all other helmetsReplacement adhesive pad for adhesive mountone TWIN data charging cablea quick start guide
LED festoon bulbs.Appropriate for 8 (10)-30 Volts DC.Light colour: warm white (3000 K). For many reasons modern LED light units are extremely practical for various deployments on board: because of the low consumption of the LEDs scarce battery capacities can be effectively employed. The extremely long life span and their vibration resistance guaranty reliable long term usage without the need to replace them. Low heat emission. Most lamps used on board can easily be converted with the various LED bulbs.We state the brightness in Lumen (lm).
This applicator eases the application of tape into seams. Through the various-width track wheels, you can use tape of 4, 5 and 6 mm widths.
Quality hinge of polished brass with polished or chromed finish.Pulled profile material, drilled and milled, with fixed brass pin.Also available in matt chromed brass by request.
Pair of pole terminals made of tin-plated brass for connecting several cable lugs for 6 mm studs or 8 mm studs made of stainless steel, with /-marking.Supplied in pairs.
Double-braided polyester halyard with a "smooth" cover for high wear made from filament yarn and of high winch grip and low stretch.A supple all-around line for heavy use on winches, it also works well on self-tailing winches.Also suitable for sheets and reef lines. Splices well into eye-splices or with wires.Color: pure white, without indicator threads (flecks).
Waxed polyester yarn, flat braided.Professional quality for whipping and sewing. On spools, 1,2 mm, 1,5 mm or 2,0 mm wide.Color: white.
Round brass design with a high gloss polished or chromed finish. Attaches with M4 threaded screws from underneath, and thus has from above a smooth, visually appealing finish.
This natural-fiber rope is woven in the traditional mode, from finely combed hemp threads. The laid 4-strand weave makes for hand rails with good grip. Quality: long hemp, polished, untarred. Exactly fits our hand rail supports.Also suitable as a climbing rope for gyms, loft beds, etc. (not for mountain sports).However, this untreated material should only be used inside.
Delicate LED chart light with flexible gooseneck.Switchable between white and red light.6 cold-white LEDs, 1 red LED. Suitable for 12 volts DC.
Simple tarpaulin hook with closed eye for rigging. Made from cast brass, for screwing in. Polished or chromed finish.
Blown (at 120ÃC) linseed oil, with a cobalt proportion of 0.006%,that deeply and thoroughly seeps into the wood and air-dries in approximately 24 to 36 hours.
Light spinnaker or whisker pole end fitting made of AISI-316 stainless steel with spring-loaded locking bolt.For riveting to an aluminium tube or for screwing to a round timber.According to the manufacturer, the variants ...-1607 and ...-1609 are designed for aluminium tubes with an outer diameter of 25 mm and 32 mm respectively, while the ...-1611 version is designed for wooden spinnaker poles with an outer diameter of 32 mm.
Robust, traditional swivel blocks made of ash wood for maritime industry and trade in a classic shape and design. Fittings made of stainless steel (AISI316), their surface blasted with glass beads to give the impression of hot-dip galvanised working blocks. Sheaves made of high-strength, self-lubricating, black ERTACETAL plastic. The sturdy stainless steel axle is secured against twisting and falling out. The bonded and screwed wooden housings are dipped in tung oil (Chinese wood oil) and can be further treated with any oil and 1K paint system. The working load corresponds to max. 1/4 of the specified breaking load (BRL).
The special tool with metal cross handle and corkscrew tip is suitable for removing used packings from stuffing boxes.Available in three different sizes:Size 1: for 6-8 mm packings,Size 2: for 10-14 mm packings,Size 3: for 14-17 mm packings.
Bar cleat with round teak bar. This cleat is universally mountable, because the bar and stands come separate. Holes are provided for additional fastening of the pole in the feet (screws are not supplied). Available in polished or chromed brass with teak bar. Delivery with mountingbolts M10.Replacement parts are available.
The SEASURE Tiller Lock is a simple, easy-to-use system for infinitely adjustable tiller locking in the desired position. This updated version maintains the proven ruggedness of its predecessor (Midshipman II), is suitable for any tiller-steered boat, and particularly useful for single-handed sailing. An integrated snubber ensures better course holding than traditional tiller lashings.The unit is mounted directly beneath the tiller. It consists of a sheave and a lever cam with a toothed slider, both housed in a compact Aluminium body. A rope runs across the aft deck through the sheave with a means of keeping it under tension When the jaw engages the line, tiller movement in both directions is blocked. Releasing the cam frees the line, allowing manual tiller control.When not in use or in an emergency, the line can be quickly snapped out of the block with a downward pull, completely disengaging the tiller. The unit is installed using two screws through the housing. Supplied ready for installation with 2 m control line (Ø 9 mm) and snubber cord.
Hand-woven, with compact filling. Braided from coconut fibers. Sizes may vary slightly due to production.
Quality tool from Germany. Made from a tool steel alloy. With double relief cutting edges and circumferential cutting edges. Absolute professional drill for the highest accuracy.
