Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Capital letters and numbers to screw on made of solid cast brass with polished surface."Umlaute" must be made from a combination of letters and the matching dots.Material thickness: approx. 6 mm.Required screws: ∅ 3,5 mm.
German national flag of SPUN-POLY cloth.This special cloth of spun polyester looks and wafts like cotton, but is 100% rot-proof and UV resistant, fade-resistant and colorfast.Cleanly sewn lanyards, single-sided with loop.
The blue sign with a white flashing light is used in inland navigation as a day and night signal with which the upstream vessel indicates to the downstream vessel that it should pass not, as is customary, port-to-port, but starboard-to-starboard.The frame and sign are made of powder-coated aluminum. The sign is blue (RAL 5017) with a 5 cm wide white border. The pivot is made of stainless steel.The blue sign is equipped with a powerful electric motor (24 V, 1.5 A) and a white rotating beacon. It is available for either side or roof mounting. The electric motor for the blue sign is also available as a replacement part (see “Accessories & spare parts”).The control panel with the flashing light generator must be ordered separately. It features a 3-position switch for operating the blue panel, an indicator light with a bulb connection, and an automatic fuse for the motor. The control panel also controls the flashing of the white light. The control panel measures 75 x 75 mm.Technical SpecificationsInstallation: either on the wheelhouse roof or on the starboard sideVoltage: 24 voltsCurrent: 1.5 A (electric motor)Sheet metal material: aluminumFrame material: aluminumRotation axis material: stainless steelCylinder material: nickel-plated steelMounting tube material: stainless steel
Thick-walled, white waste-water hose of PVC with integrated metal spiral.Formulated for exceptional odor containment, made in Germany, flexible, does not kink. The surface is smooth and easy to keep clean.Temperature range -5 to +60°C, operating pressure 6 bar. The 16 mm and 19 mm diameters are specifically designed as vent hoses.
Straight small cleat, made from cast stainless steel (AISI 316), polished.Square mounting foot with two mounting holes.
Light, inexpensive bolt.Comes complete with sleeve.Made from polished or chromed brass.
Made of polished or chromed brass, with round base plate. Heavy design for spars 25, 30 oder 35 mm.
Elegant navigational light pole with a white, MED-approved, all-round light for boats under 7 m length as sole navigation light. The overall height of the pole is 1,17 m.The angle of the solid foot fitting is adjustable with a slip-proof handle and easily dismountable.A connection cable (not part of the shipment) can be passed inside of the pipe.The small motor boat mast is assembled by TOPLICHT from the single fittings and the combination of a stainless steel pole of 1 m length and the navigation light.It consists of the following parts:all-round LED light AQUA-SIGNAL 34 (art.no. 3343-041), stainless steel base fitting, round and adjustable, base 70 mm, height 40 mm, stainless steel head fitting, 1 m stainless steel pipe, Diameter = 22 mm.
Delicate LED light with a flexible arm for mounting on the wall or the table.Body and base are made from matte stainless steel. A rocker switch is situated in the base.Warm white (3000 K) or cool white (5000 K) LED, capable of 10-30 V , power consumption 2 W, brightness 100 lm.
Undrilled half-round rail (rubbing band), made from brass (Ms 58: CuZnPb2) .For baseboards, stem rails and wear strips. The small size 10 x 3 mm is convenient for shipping in a standard package (it is rolled).Rubbing band in larger dimensions presented under "Suitable items". Pre-cuts in steps of 1 m are possible.The graduated price will only be granted for a full length of 5 m. Please order multiples of 5 m to obtain the graduated price.
Polished stainless steel thimble.Solid design, similar to DIN 6899 Form B.Intended for rope and wire. From groove widths of 20 mm up, comes with a strengthened back.For standing rigging, we recommend Art-Nr. 1558-... and 1509-... For DYNEEMA we recommend reinforced thimbles.
Low-profile simple hood vent, made from stainless steel plate, for mounting on the deck or side of the hull.We recommend mounting it on a black plastic deck flange with sealant and a 75 mm gland.
Versatile stainless steel (AISI 316) swivel.Pin diameter (D) corresponds to the recommended chain strength.Design: shackle/eye.
Comfortable tying up to mooring buoys or rings. This sturdy stainless steel mooring hook provides a reliable connection between mooring buoy and vessel. The connection can be conveniently secured and released on board by means of an internal, spring-loaded remote release.The strong construction has a total length of about 90 cm and consists of a hook made of 12 mm round steel and a welded-on tubular rod (Ø 17 mm) with an internally guided 12 mm spring-loaded bolt as a remote release. The hawser or mooring line is attached directly to the eye of the hook and guided on deck via a fairlead (Ø 28 mm) welded to the upper end of the rod.
Rectangular vent, cleanly made from stainless steel plate.Comes with or without stainless steel screen.
Ball latch made entirely of A4 stainless steel (AISI 316), including the balls and springs.
Thin standard brass hanks, rolled finish.For long-lasting attachment to the luff grommets.Pistons with rounded grips, secured with stainless steel springs.
Round solid wood panels made of mahogany, with a satin lacquered surface. Ideally suited for clocks, bells, wall lamps and the like. All plates have a mounting device on the back.
The tiller fitting is made from cast bronze.This "comb fitting" is used to lock the tiller at different positions.This fitting set comes complete with comb, tiller pin and deck hinge.May be folded away, when not in use.Bronze, tumbled surface with matte finish. The different sizes have the same inside measurement, B1 = 58 mm. A pair of outside hinges can be swopped against a centre hinge and vice versa.
Boarding ladder hinge, comes in polished or chromed brass.Supplied in pieces, two hooks are required per ladder.For wood thickness 20 mm.
Cast brass. With strong folding handle for lifting.Polished or chromed brass finish.
Practice-oriented set with five sail needles in a matching plastic storage box.3-sided English-quality needles of polished steel.The set holds 1 piece each of sizes Nr. 12, 14, 16, 17 and 18.
Chart paper for the weekly circulation in the BARIGO barographs 2000, 2001, 2003, 2004, 2005, 2006.Also suitable for barographs from other manufacturers that use the same paper format. The zero point may need to be slightly readjusted by adjusting the height of the fiber pen.Technical featuresPaper size: 305 x 93 mmContent: 53 single sheets, sufficient for 1 yearBARIGO article number: DIA107
