Waste hose | TOPLICHT

Art. No.	D (mm)	wall thickness (mm)	pressure (bar)	Price (metre)	Delivery time	Note list	Buy
No products found.

Accessories

T-bolt clamp

Heavy, wide hose clamps, made entirely of A2-stainless steel.Hexagonal bolt for easy mounting in hard-to-reach corners. Due to the width particularly well suited for hose mounting on board.Type: HEAVY DUTY.

From €5.90 *

Details

Vented loop GRP TRUDESIGN

A very robust 160° vented loop elbow made from GRP with an inserted lip valve and fastening brackets for bulkhead mounting.The pipe, that is to be vented, is led above the water line and is fitted with a vent loop at the apex, thereby effectively preventing the siphon effect at toilets and pump installations and stopping the water from flowing back. TRUDESIGN is the world leader in fittings made from composite materials. From its founding in 1974 the fittings are manufactured in New Zealand. Every TRUDESIGN part is made from high tensile composite GRP, a glass fibre reinforced Polyamide (6). The advantages are a high rigidity, temperature-resistance -40° to 80° C, resistant to oil and chemicals, of low weight, absolutely corrosion-resistant, electrically non-conductive and therefore especially suited for ship building materials which are galvanically sensitive like aluminium and steel.Every TRUDESIGN fitting has a tapered Whitworth pipe thread BSP (British Standard Pipe Thread) according to ISO 228-1, it is therefore fully convertible with fittings from brass, bronze or stainless steel. The shuttle valves and through hulls are approved and IMCI certificated after ISO 9093-2 (sea cocks and through hulls for pleasure vessels).

From €14.95 *

Details

Similar products

Waste hose SPECIAL

Absolutely odor-proof faeces hose with integrated steel spiral.Three-layer design: white CR rubber on the outside, intermediate layer of textile fabric with steel spiral, smooth black EPDM rubber on the inside.The hose is designed for a working pressure of 6 bar and is temperature-resistant from -35°C to +135°C.

From €24.89 *

Details

Holding tank vent filter

For installation in the vent line of a holding tank.Two-sided hose attachments of 16 mm and 19 mm.Comes with wall bracket.

€44.95 *

Details

Diverter valve JABSCO

This valve is lockable using a padlock. Pursuant to the HELCOM accord it is compliant with ISO 8099, which prescribes a lockable outlet for all holding tanks since. With this valve you can fulfill this requirement!Plastic, for hoses d = 38 mm.Through the included nozzle, even 25 mm hose can be attached on the inlet side. Two attachment nozzles turn, so that it can be installed in just about any mounting situation.A mounting set (valve axle lengthening) for mounting the valve on the back of a bulkhead is available as an accessory.

€119.00 *

Details

Fresh and waste water tank

Sturdy tanks made of thick-walled PE plastic (polyethylene), which prevents unpleasant odors from penetrating. Suitable for faeces and waste water. Dark blue color.Rectangular shape Tank top with screw-on inspection cover (opening diameter of 105mm) and a 3/8" internal thread for connecting the tank ventilationNumerous blind spigots with internal thread that can be used individually depending on the installation situation and are intended for connecting the filling and drain lines: - 4 blind spigots 1½" internal thread, 2 on each end face - 4 blind spigots ¾" internal thread, 2 on each end faceThe selected spigot can be easily drilled out for connection.

From €89.00 *

Details

More products from the category Hoses for waste water

Waste hose

Thick-walled, white waste-water hose of PVC with integrated plastic spiral.Formulated for exceptional odor containment, made in Germany, very flexible, does not kink. The surface is smooth and easy to keep clean.

From €6.40 *

Details

Waste hose SPECIAL

From €24.89 *

Details

Waste hose

From €6.40 *

Details

Waste hose SPECIAL

From €24.89 *

Details

Waste hose