SEASURE Tiller Lock
The SEASURE Tiller Lock is a simple, easy-to-use system for infinitely adjustable tiller locking in the desired position. This updated version maintains the proven ruggedness of its predecessor (Midshipman II), is suitable for any tiller-steered boat, and particularly useful for single-handed sailing. An integrated snubber ensures better course holding than traditional tiller lashings.
The unit is mounted directly beneath the tiller. It consists of a sheave and a lever cam with a toothed slider, both housed in a compact Aluminium body. A rope runs across the aft deck through the sheave with a means of keeping it under tension When the jaw engages the line, tiller movement in both directions is blocked. Releasing the cam frees the line, allowing manual tiller control.
When not in use or in an emergency, the line can be quickly snapped out of the block with a downward pull, completely disengaging the tiller. The unit is installed using two screws through the housing. Supplied ready for installation with 2 m control line (Ø 9 mm) and snubber cord.
€93.90*
€93.90
Prices incl. VAT plus shipping costs
Description
The SEASURE Tiller Lock is a simple, easy-to-use system for infinitely adjustable tiller locking in the desired position. This updated version maintains the proven ruggedness of its predecessor (Midshipman II), is suitable for any tiller-steered boat, and particularly useful for single-handed sailing. An integrated snubber ensures better course holding than traditional tiller lashings.
The unit is mounted directly beneath the tiller. It consists of a sheave and a lever cam with a toothed slider, both housed in a compact Aluminium body. A rope runs across the aft deck through the sheave with a means of keeping it under tension When the jaw engages the line, tiller movement in both directions is blocked. Releasing the cam frees the line, allowing manual tiller control.
When not in use or in an emergency, the line can be quickly snapped out of the block with a downward pull, completely disengaging the tiller. The unit is installed using two screws through the housing. Supplied ready for installation with 2 m control line (Ø 9 mm) and snubber cord.
Strong helm arrester with a lever clamp made from stainless steel by the German manufacturer NIRO PETERSEN.A cam lever with guide plate enables the continuous arresting of the tiller rope.
This spring-loaded lever made from stainless steel holds a tensioned line in any position and thus locks the rudder.For 8 to 10 mm lines.Polished stainless steel with black plastic knob.Mountable above or below the tiller.
Simple, functional tiller stop, made from polished stainless steel plate. Folds away, thanks to strong hinges.The grating allows you to set a light rudder position appropriate to your boat's specific characteristics.Comes with tiller end piece.
The tiller fitting is made from cast bronze.This "comb fitting" is used to lock the tiller at different positions.This fitting set comes complete with comb, tiller pin and deck hinge.May be folded away, when not in use.Bronze, tumbled surface with matte finish. The different sizes have the same inside measurement, B1 = 58 mm. A pair of outside hinges can be swopped against a centre hinge and vice versa.
The strong bracket made of cast bronze with polished surface enables optimal, horizontal mounting of the tiller autopilot when the tiller of the boat is lower or higher than the fixed end of the autopilot tiller drive. Made in England by DAVEY. Supplied without pin for the inlet socket on the autopilot tiller drive. A hole for inserting the pin corresponding to the autopilot model is provided, Ø 6.5 mm.
The tiller fitting is made from cast bronze.This "comb fitting" is used to lock the tiller at different positions.This fitting set comes complete with comb, tiller pin and deck hinge.May be folded away, when not in use.Bronze, tumbled surface with matte finish. The different sizes have the same inside measurement, B1 = 58 mm. A pair of outside hinges can be swopped against a centre hinge and vice versa.
The SEASURE Tiller Lock is a simple, easy-to-use system for infinitely adjustable tiller locking in the desired position. This updated version maintains the proven ruggedness of its predecessor (Midshipman II), is suitable for any tiller-steered boat, and particularly useful for single-handed sailing. An integrated snubber ensures better course holding than traditional tiller lashings.The unit is mounted directly beneath the tiller. It consists of a sheave and a lever cam with a toothed slider, both housed in a compact Aluminium body. A rope runs across the aft deck through the sheave with a means of keeping it under tension When the jaw engages the line, tiller movement in both directions is blocked. Releasing the cam frees the line, allowing manual tiller control.When not in use or in an emergency, the line can be quickly snapped out of the block with a downward pull, completely disengaging the tiller. The unit is installed using two screws through the housing. Supplied ready for installation with 2 m control line (Ø 9 mm) and snubber cord.
Strong helm arrester with a lever clamp made from stainless steel by the German manufacturer NIRO PETERSEN.A cam lever with guide plate enables the continuous arresting of the tiller rope.
This spring-loaded lever made from stainless steel holds a tensioned line in any position and thus locks the rudder.For 8 to 10 mm lines.Polished stainless steel with black plastic knob.Mountable above or below the tiller.
Simple, functional tiller stop, made from polished stainless steel plate. Folds away, thanks to strong hinges.The grating allows you to set a light rudder position appropriate to your boat's specific characteristics.Comes with tiller end piece.
