Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
5"' Burner for petroleum lamp with 6 mm wick, made of brass. The burners consist of two parts: the basket is screwed to the tank of the petroleum lamp and holds the glass cylinder, the burnt tube holds and regulates the wick.In order to give you an idea of the brightness of the burners: if you idicate the burner with which 220 Volt filament lamp it is 3 watt.Â
Smoke catcher for wall-mounting: The smoke shade can be moved on a rod for various lamp sizes and secured with a screw.Polished plate brass, with rod.
Long-link brass chain for hanging lamps. The chain links are not soldered there for easy to mount. The inner diameter of the chain links is specifyed by L and W (B).
Paraffin (kerosene) burners for lamps are made out of two parts:A burner socket (with wick) and a glass holding ring (to hold the glass cylinder).For lamps with VESTA glass shades or cardboard shades, you need both a burner socket and a glass holding ring.We offer complete burners or single parts.
Paraffin (kerosene) burners for lamps are made up of two parts:A burner socket (with wick) and a glass holding ring (to hold the glass cylinder).For lamps with VESTA glass shades or cardboard shades, you need both a burner socket and a glass holder with ring.We offer complete burners or single parts.
Heavy-duty, precision-cast stainless steel, with 5 mm screw holes.
Exceptionally solid A4 cast stainless steel (AISI 316), polished.Each with two countersunk holes (5 mm) for secure fastening.
Striking plate made of brass that matches the yacht lock. Available with chromed surface.
Lock casing made of brass matching our yacht rim locks.Available with polished or chromed surface.
Brass oval plate, matches our yacht locks with with a four cornered shaft of 8 mm.
Pair of brass oval plates matching our yacht locks with a four cornered shaft of 8 mm.
Yacht slide door lock, made of brass (with stainless steel springs) with countersunk catch, the faceplate is made of brushed stainless steel. You can't hook yourself on this lock, because the latch doesn't protrude beyond the sleeve. This lock has four tumblers and comes with two keys. It is also deliverable as a pair with a key (one-key-fits-all) that fits to the two locks. Locknut: 8 mm. Backset: 40 mm. Distance: 60 mm. A striking plate must be ordered separately. To select the right lock typ, please see our PDF below.
We offer 6-piece fittings sets for the installation of sliding doors with a four cornered shaft of 8 mm and with 2 m long tracks. The set is made up of: Distinctive hanging tracks (top) with two hanging rollers with fittings and a floor track (below) with two rollers, which can be installed on the bottom of the door. Heavy design for doors up to 150 kg. Top: Open box section 30 x 80 mm of hot-dip galvanized steel (4.5 kg) with brass rollers Diameter = 65 mm, ball bearings, and brass fittings (1 kg) 50 x 155 mm. Bottom: T-tracks 12 x 30 mm of stainless steel (2 kg) with rollers diameter = 30 mm and roller fittings 37 x 64 mm (1,0 kg), chromed brass.
Different accessoires and fittings for push-pull cables.Fits Type 43 with 1/4"-28 UNF thread.
Socket, in accordance with DIN-ISO 4165, for below decks use. Outlet with 6.3mm flat plug attachment. Rated current to 8A, brass contacts, black plastic housing.
Standard plug, pursuant to DIN-ISO 4165, for use with cigarette lighter sockets.Plug with screw connections, for use below decks.Rated current to 8A, brass contacts, black plastic housing.
A wide range of spare parts are available for the ISOTEMP water heater.
Expansion tank for heat and pressure-water installations.Tank with integrated membrane for constant pressure (max. 8 bar).
A free, environmentally friendly way to create warm water for showering and washing onboard is through the warmth of the engine or from the hot water system of a stove or heater.The heating of water to be used can also be achieved through the built-in, thermostat regulated 230 volt heater, heat output 500 watts (1200 watts heating unit available on requess), screw in thread 1 1/4".The tank is made of stainless steel AISI316, heating coil and unit are made of copper, the housing is fully insulated with PU foam, the outer jacket is of plastic and stailess steel sheet AISI304.Connections: 1/2" BSP pipe thread.Comes with pressure control valve, drain cock and corrosion-protection anode of magnesium.Can be mounted upright or reclined.
All REFLEKS heating systems with a water circuit should be equipped with this shut-off valve.The KBB fire protection valve is a compact valve in a corrosion-resistant, non-flammable design that operates purely mechanically and does not require a power supply.The temperature sensor is connected to the valve via a permanently soldered capillary line.As soon as the temperature at the sensor exceeds the set value (90°), the oil supply to the stove is immediately interrupted by the valve.The valve remains closed until the reset button is pressed.The valve can also be triggered manually by pulling the reset button.The valve (supplied with connection material for 8 mm pipes, SR 8 mm cutting ring fitting on both sides) is installed in the oil supply line directly upstream of the regulator.The temperature sensor measures the flow hot water temperature near the heater. If the set temperature (90°C) is exceeded, the oil supply is shut off immediately.To connect the sensor to the heating pipework, use a copper T-piece with two G ½" male threaded pipe fittings (please order item no. 4292-100 separately). The vertical branch of the T-piece does not have direct access to the water circuit of the heating system, but is soldered onto the water-carrying pipe and serves to accommodate the temperature sensor.Care must be taken during installation to ensure that the capillary line is not kinked under any circumstances. Length of the sensor line 200 cm.
To insulate the exhaust pipes we offer tubes made from a highly heat resistant aramid aluminium fabric.Material thickness approx. 1,4 mm, approx. 500 g/m², enduring up to 1000°C radiant heat.
Very robust through hull outlet made from polished stainless steel A4 (AISI 316) with a flange to bolt from the outside.Wall thickness of the tube 2 mm, wall thickness of the flange 4 mm.The flange is at right angles with the tube.
