Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Short fibre glass antenna for VHF receivers 156-163 MHz.For a fixed installation.Comes complete with 18,0 m coax cable, RG58 plug and mounting bracket from stainless steel.Length of antenna 230 mm.
Ground plates made from special porous material from bronze, with as large a surface as possible, are especially well suited for VHF radios.They improve the reception and range. They proved their worth with GPS units, weather decoders, weather fax receiver, as well as ham and shortwave radios.The plates are fixed with bolts to the hull and connected to the apparatus via cable.Shipping with screws and nuts from bronze.
Initial programming of a new device purchased from us!An EPIRB - and therefore also a PLB (Personal Locator Beacon) - i.e. a COSPAS-SARSAT satellite radio beacon is generally subject to registration in Germany.Both EPIRBs and PLBs are registered on a ship-by-ship basis. This means that the MMSI of your own ship is programmed into the device, which - unlike with a radio - you cannot do yourself. Alternatively, the PLB can also be registered in the UK on a device/person basis.Therefore, please enter the required ship data in the last step of the order under "Remarks":Ship nameMMSIIMO no. (if available)Call signFlagYou can also send us a copy (e-mail attachment) of the first page of your Ship Station Licence (certificate of assignment).You will receive the corresponding coding certificate (including 15-digit HEX ID code, "protected message") with the device, which you submit to the Federal Network Agency, Hamburg field office.The form for the "Application for the allocation of numbers of the mobile maritime and inland waterway radio call sign, MMSI and ATIS for recreational navigation (SHIP STATION LICENCE)" is used for new applications and applications for amendments.You can find it here: www.bundesnetzagentur.deThe details of your EPIRB / PLB will then be stored with the ITU* and the MRCC** Bremen so that appropriate action can be taken in the event of an emergency at sea. For example, a telephone call can be made to a designated person on shore to check whether it may be a genuine emergency.* The International Telecommunication Union (ITU)** Maritime Rescue Coordination Center (MRCC)
Brass design of medium weight.Surface elaborately hand-polished and subsequently chromed. Bolt dimension: 10 x 2,5 mm. The spring-loaded slide means that mounting in any position is possible.Sleeve or striking plate must be ordered separately.
Short construction in strong design, completely made of brass. Sturdy , hexagonal bolt holder. Surface polished or chrome plated. Supplied complete with locking sleeve.
Double ball catches with housing from brass or nickel plated brass.Balls and springs are made from stainless steel.
For small doors and drawers.Lockable, with 4 mm hole for a small padlock. For doors with a thickness up to 38 mm.Made from brass with polished or chromed finish.Comes with matching striking plate.
Very strong doorholder from brass, made in the sand casting process, surface rolled. With 90 mm distance (A), with grey rubber buffer.Shipping with counter plate.
Rectangular backing plate for air registers.Plate brass 1 mm. Polished finish.
Rectangular backing plate.Stainless steel, plate depth 1 mm.
Rectangular locking air register.Polished brass, plate depth 1 mm.Matching backing plates are available.
Rectangular, closing.Stainless steel, plate depth 1 mm.Matching backing plates are available.
Counter plates for ventilation sliders made of heavy sheet brass with a polished or chrome-plated surface.The material thickness is 1.25 mm.
Heavy plate brass 1.25 mm, polished or chromed finish.Matching backing plates are available.
Particularly heavy design of polished cast brass.The matching backing vents (without turning plates) are available.
Cabinet latch with key cylinder for doors of up to 20 mm width. Operation through a push button on an oval plate with soldered-on M4 threaded sleeves, comes complete with button shield and two keys. Polished or chromed brass.Striking plate must be ordered separately.
Backing grill (exterior) for vent holes. Heavy design of 1.5 mm plate brass. Polished or chromed brass finish.
High-quality, T-shaped, made from solid cast brass, polished or chromed finish.Made in Germany.
Heavy stainless steel hatch hinge. The pull-out pin allows the hinge to be divided so that the hatch cover can be removed.Available in long or short version.
Brass box latch without locking mechanism. Durable design of polished or chromed brass. Through shifting the latch and turning the lock 180 degrees, this lock can be used on the right or left. Backset: 25 mm. Locknut: 7 mm. A strikingbox must be ordered seperatly.
Brass box latch with locking mechanism. Durable design of polished or chromed brass. Through shifting the latch and turning the lock 180 degrees, this lock can be used on the right or left. Backset: 25 mm. Locknut: 7 mm. A strikingbox must be ordered seperatly.
