Skip to main content

We offer 6-piece fittings sets for the installation of sliding doors with a four cornered shaft of 8 mm and with 2 m long tracks.
The set is made up of:
Distinctive hanging tracks (top) with two hanging rollers with fittings and
a floor track (below) with two rollers, which can be installed on the bottom of the door.

Heavy design for doors up to 150 kg.

Top: Open box section 30 x 80 mm of hot-dip galvanized steel (4.5 kg) with brass
rollers Diameter = 65 mm, ball bearings, and brass fittings (1 kg) 50 x 155 mm.

Bottom: T-tracks 12 x 30 mm of stainless steel (2 kg) with rollers diameter = 30 mm and roller
fittings 37 x 64 mm (1,0 kg), chromed brass.

Description

We offer 6-piece fittings sets for the installation of sliding doors with a four cornered shaft of 8 mm and with 2 m long tracks.
The set is made up of:
Distinctive hanging tracks (top) with two hanging rollers with fittings and
a floor track (below) with two rollers, which can be installed on the bottom of the door.

Heavy design for doors up to 150 kg.

Top: Open box section 30 x 80 mm of hot-dip galvanized steel (4.5 kg) with brass
rollers Diameter = 65 mm, ball bearings, and brass fittings (1 kg) 50 x 155 mm.

Bottom: T-tracks 12 x 30 mm of stainless steel (2 kg) with rollers diameter = 30 mm and roller
fittings 37 x 64 mm (1,0 kg), chromed brass.

More products from the category Sliding door fittings

Heavy slide door fittings
We offer 6-piece fittings sets for the installation of sliding doors with a four cornered shaft of 8 mm and with 2 m long tracks. The set is made up of: Distinctive hanging tracks (top) with two hanging rollers with fittings and a floor track (below) with two rollers, which can be installed on the bottom of the door. Heavy design for doors up to 150 kg. Top: Open box section 30 x 80 mm of hot-dip galvanized steel (4.5 kg) with brass rollers Diameter = 65 mm, ball bearings, and brass fittings (1 kg) 50 x 155 mm. Bottom: T-tracks 12 x 30 mm of stainless steel (2 kg) with rollers diameter = 30 mm and roller fittings 37 x 64 mm (1,0 kg), chromed brass.

From €28.50 *
Light slide door fittings
We offer 6-piece fittings sets for the installation of sliding doors with a four cornered shaft of 8 mm and with 2 m long tracks. The set is made up of:Distinctive hanging tracks (top) with two hanging rollers with fittings and a floor track (below) with two rollers, which can be installed on the bottom of the door. Light design for doors up to 30 kg. Top: Open box section 15 x 45 mm of stainless steel (1.8 kg). Stainless-steel fitting 60 x 70 mm with plastic rollers diameter = 40 mm. Bottom: L-tracks 11 x 12 mm of stainless steel (0.9 kg) with rollers diameter = 17 mm and chromed brass roller fittings 15 x 39 mm.

From €18.50 *

Zuletzt angesehene Artikel