Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2481)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(13)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Wichard
Wichard is a French manufacturer of marine equipment based in Thiers. Founded in 1919, the company specializes in stainless-steel fittings for sailing and motor yachts. Its product portfolio includes snap hooks, shackles, swivels, blocks, deck hardware, safety equipment, as well as diving and industrial accessories. Wichard operates internationally and is part of the Wichard Group, which also includes brands such as Profurl (furling systems), Sparcraft (masts), Facnor (furling gear), and Lorima (carbon masts).
Rope shackle from DYNEEMA SK75 with a high breaking load and a practical forged stainless steel lock made by WICHARD for easy opening even after high loads.
Racing snap-shackle with small swivel eye. It's well suited for spinnaker and genoa sheets.Manufactured from high-tensile stainless steel (material: 1.4542). WICHARD distinctions: Resistant to high loads (HR). Can be opened easily under load: by hand, with a marlin spike or with a tether. The French forge WICHARD stands for the highest quality and safeness now for more than one hundred years. Many racing sailors are deeply convinced of the reliability of WICHARD products and have kept developing those in close cooperation wit the the forge for decades.The maximum sensible working load (WL) in the sailing sector is approximately 50 % of the specified breaking load (BRL). See also the WICHARD brochure below under Downloads & Information.
Block housing made of high-quality plastic with a fixed eye,stainless steel sheave.Manufacturer: WICHARD.
Snap hook made of forged stainless steel (material 1.4401, V4A) with high strength and guaranteed breaking load. Thanks to the special torsion spring clasp, a WICHARD design, the hook has no sharp edges!The safe working load (WLL) for lifting loads is ⅕ of the specified breaking load.
Quality WICHARD snap hook, made from forged stainless steel. With clip springs.A beautifully polished and rounded form makes these high-strength fittings into "hand-flatterers". Also available with swivel eye.
The idea originates from the classic gaff shackle, but this forged WICHARD shackle is employed in the "modern rigging" instead of a block, for example for 2:1 sheeting of the main sail or the gennaker.The polished shackle redirects the line with very little friction and has nevertheless a higher strength and smaller overall length than a comparable block.The rack at the head of the shackle is meant as becket for a 3:1 reduction.With captive, high resistant pin.
The idea originates from the classic gaff shackle, but this forged WICHARD shackle is employed in the "modern rigging" instead of a block, for example for 2:1 sheeting of the main sail or the gennaker.The polished shackle redirects the line with very little friction and has nevertheless a higher strength and smaller overall length than a comparable block.The rack at the head of the shackle is meant as becket for a 3:1 reduction.With allen head pin.
Open fairlead eye made from high tensile Duplex stainless steel and an endless DYNEEMA loop. This small and compact cast steel part can replace conventional snatch blocks and sheave pulleys with slow running lines and thereby displays enormously high breaking loads and much less weight. On one side the DYNEEMA loop is only slipped over, meaning the soft block is easily opened and closed. Typical applications: z. B. mast heel block, barber hauler, gennaker foot block.
Removable sheet lead with M10 threaded screw neck, nut and washer for sheets and reefing lines.
Forged key-pin shackle, made from exceptionally strong and seawater-resistant stainless steel 1.4567 (AISI305CU) by the quality manufacturer WICHARD. A secondary pin can be unscrewed on the side, so that the shackle can be inserted into an already-spliced eye. The unthreaded captive pin can be released quickly and easily by rotating it a half-turn, which makes these shackles exceptionally good for halyards.These high-strength shackles, marked by WICHARD with HR (high resistance), are used preferentially with high-load halyards, as well as with wire and Dyneema rope. The French forge WICHARD stands for the highest quality and safeness now for more than one hundred years. Many adrenaline sport or racing sailors are deeply convinced of the reliability of WICHARD products and have kept developing those in close cooperation wit the the forge for decades. For the industry all WICHARD shackles are stamped with a Working Load Limit (WLL). This is the maximum in approved working load for the lifting of loads in the commercial sector. Additionally to the breaking load (BRL) WICHARD also states a maximum working load (WL) meaningful in the maritime sector.
WICHARD shackle, made from forged polished stainless steel 316 L, extra-wide straight design with captive bolt. The French forge WICHARD stands for the highest quality and safeness now for more than one hundred years. Many adrenaline sport or racing sailors are deeply convinced of the reliability of WICHARD products and have kept developing those in close cooperation wit the the forge for decades.For the industry all WICHARD shackles are stamped with a Working Load Limit (WLL). This is the maximum in approved working load for the lifting of loads in the commercial sector. The WLL is 1/5 of the breaking load. The shackles are also CE marked and comply with the directive 2006/42/EC. Additionally to the breaking load (BRL) WICHARD also states a maximum working load (WL) meaningful in the maritime sector.
Foldable padeye from WICHARD, forged from high-strength stainless steel 1.4542 (AISI 630). This padeye offers very high breaking loads for good functionality. The silicone piece mounted underneath hinders folding and holds the D-ring up. Very well suited as an attachment point for jacklines (complies with ISO 15085).
High quality, forged snapshackle for halyards, sheets, and other uses.Made in France of HR stainless steel by WICHARD (High Resistant: steel quality 1.4542 (17.4PH/Aisi 630)). High breaking load, captive bolt, easy to open, fixed eye. The French forge WICHARD stands for the highest quality and safeness now for more than one hundred years. Many adrenaline sport or racing sailors are deeply convinced of the reliability of WICHARD products and have kept developing those in close cooperation wit the the forge for decades. For the industry all WICHARD shackles are stamped with a Working Load Limit (WLL). This is the maximum in approved working load for the lifting of loads in the commercial sector. Additionally to the breaking load (BRL) WICHARD also states a maximum working load (WL) meaningful in the maritime sector.
Snap shackle with swivel eye, exceptionally suited to halyards.Opens to the side. Locks using a spring-loaded pin. Manufactured from high-tensile stainless steel (material: 1.4542). WICHARD distinction: Resistant to high loads (HR). The French forge WICHARD stands for the highest quality and safeness now for more than one hundred years. Many adrenaline sport or racing sailors are deeply convinced of the reliability of WICHARD products and have kept developing those in close cooperation wit the the forge for decades. For the industry all WICHARD shackles are stamped with a Working Load Limit (WLL). This is the maximum in approved working load for the lifting of loads in the commercial sector. Additionally to the breaking load (BRL) WICHARD also states a maximum working load (WL) meaningful in the maritime sector.
High-quality, forged snapshackles for halyards, sheets, and other uses. Made in France of HR stainless steel (high resistant). High breaking load, captive bolt, easy to open.Swivel fork, pin, and ringding. The French forge WICHARD stands for the highest quality and safeness now for more than one hundred years. Many adrenaline sport or racing sailors are deeply convinced of the reliability of WICHARD products and have kept developing those in close cooperation wit the the forge for decades. For the industry all WICHARD shackles are stamped with a Working Load Limit (WLL). This is the maximum in approved working load for the lifting of loads in the commercial sector. Additionally to the breaking load (BRL) WICHARD also states a maximum working load (WL) meaningful in the maritime sector.
High quality, forged guardrail hook made from stainless steel 1.4404 (AISI316L).Robust, closed design with inner thread M8 for thread terminals.The long flap enables one to apply more clamping force when hooking on.
A one-handed, self-closing, forged stainless steel (AISI 316L) railing hook.Particularly well-suited for situations where one hand is occupied with carrying something but you still don’t want to climb over the railing wire.The railing wire can be screwed in and adjusted using an M6 or M8 threaded terminal.
WICHARD eyebolts. Forged quality.Made from V4A stainless steel.
Forged from high-strength A4 stainless steel HR 1.4542 (AISI 630) by the French quality forge WICHARD.These swivels have very high breaking loads (BRL) and guaranteed working loads (WL).Shackle / shackle design with self-locking pin.
Forged from high-strength A4 stainless steel HR 1.4542 (AISI 630) by the French quality forge WICHARD.These swivels have very high breaking loads (BRL) and guaranteed working loads (WL).Shackle / shackle design with hexagon socket (In6K) bolt.
WICHARDS OFFSHORE LINE CUTTER is specifically designed for rescue operations offshore and a must for personal safety equipment for offshore-racing, catamaran sailing or white-water sports.The stainless-steel blade allows to quickly cut through various lines up to 9mm diameter. The line cutter comes with an integrated shackle key and a secured sheath with multiple fastening points which multiple ways to attach it personally to the sailor (life jacket, arm, leg) or on deck (cockpit, steering wheel, mast foot block, trampoline, catamaran cross beam, etc..).Specifications:Specially hardened stainless-steel blade (70 HRC) Integrated shackle openerMaterial: handle: Polyamide (PA) & glass fibres; sheath: polyamide (PA), fluorescentBlade length: 40 mm Length: 102 mm
Truly lightweight fid for the release and opening of spinnaker sheet shackles made from aluminium.Equipped with an anti-slip handle.
The recreational and outdoor knife AQUATERRA with its arrestableblade made from excellent knives steel AISI 420C is easy tohandle, light and ergonomically shaped. This special steel is alittle less resistant to seawater on the one hand, but on theother stays sharp for a very long period of time.The blade hasa straight cut throughout and can be re-sharpened.EveryWICHARD knife is equipped with a well manufactured "Soft Grip"plastic handle and is shipped with an adjustable hand strap.
High-end life line by WICHARD, in accordance with DIN EN ISO 12401 and ISAF/WORLD SAILING OSR with 2 carbine hooks.Black elastic belt strap, with neon coloured reflective strips woven in and with an integrated overload indicator, which is signaling when the belt was stressed over and above its working load.The carbine hook WICHARD ProSnap is made from high tensile cast aluminium with a safety lock that is operable one-handed and an extra large opening (26mm). Braking load 20kN.
