Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Tarred twine, made from natural cannabis/hemp fibres.For whipping and rigging.Available in coils or rolls. Tarred yarn has been used aboard sailing ships for rigging, to serve and knot tying, as well as for tying ratlines and hanks for centuries.In Scandinavia especially, the twine made from two yarns tarred caulk (Dansk Merling) is used for fancy work.MARLINE, made from 3 threads (when PP it is only made from 2 threads), is suitable for example for serving wires of 14mm maximum. HOUSING is made from 4 threads (when PP it is only made from 3 threads) and is commonly used for serving and tying in of ratlines. SPUNYARN is made from 7-8 threads and is mostly used to serve thick splicesAdditionly we offer a somewhat thinner 5-strand SPUNYARN which has been proven to serve wires from 20mm thickness. Historically these yarns were made from hemp which had to be impregnated in Swedish tar for conservation. Wood tar is washed out by rain and spindrift unfortunately, with the effect, that the materials used in the rig have to be newly tarred twice a year.Nowadays those tarred yarns are made from rot-proof PP staple fibre (SPLEITEKS) threads. As a protection against UV rays these also have to be tarred now and then, but they forgive a lack of maintenance much better than natural fibres.
Andersen bailers are recognised by sailors around the world as the most efficient and reliable self-draining valves on the market. When closed, they seal flush with the outside of the hull and keep the boat watertight, as soon as they are opened while sailing, they create a venturi effect that quickly and automatically draws the accumulated water out of the boat.Andersen bailers are made from high quality stainless steel and are designed to give years of trouble-free service.The origins of the Andersen bailer go back to the legendary Danish regatta sailor Paul Elvström, who won four Olympic gold medals and made a lasting impact on the sport as an innovator.The bailers are available in various sizes for indoor or outdoor installation.An installation template is included as well as the fixing screws and a rubber seal for the internal installation models.
Fittings made of polished brass, suitable for e.g. curtain tubes with a diameter of 10 mm. A central support with galvanized hanger bolt or an end knob are available.
The replacement pen can be used for almost all drum barographs and can also be used for other writing instruments. The minimum writing period is one year.
Special tape for attaching to the surface of the seam bottom to hinder three-edge adhesion. Rolls of 50 m.
Rust-free wire, made from stainless steel 1.4401 (AISI316). Thin and flexible wire with a 7x19 cable construction, exceptionally well suited for running rigging (halyards, etc.).Warning: The flex radius must be kept as large as possible! This wire should only run over sheaves whose diameter is not smaller than the 14- to 15-fold wire diameter.Available per meter, also available in 125 m spools.
Midweight, good quality, polished or chromed brass.With brass pin and 7.5 mm offset for overlaid doors.Made in Germany.Right and left designs available.
Solid design of polished cast brass.Slim design with transversally placed feet.
Strong shroud or chain plate with triangular ground plate made from seawater resistant cast bronze and 3 holes for mounting screws.Surface: tumbled with matt finish.The drilled eye of the whiskerstay fitting is situated high enough above the ground plate for the turnbuckle not to touch it.
Watertight cord through-hull of stainless steel and chromed brass.The deck through-hull allows the plug to go through along with the cable, so that a seperation in the deck area is not necessary. Good solution for antenna and radar cables, for example.Comes complete with deck seal, screws and blind plug.
Welded round thimble, made from steel.Small size is galvanized, hot-dip galvanized from RW 10 mm.With deep groove, for rope.
The artificial training horizon allows for the measurement of celestial body altitude using a sextant when there is no view of the horizon—for example, at night, in ground fog, during voyages close to land, or for land navigation.The CELESTAIRE artificial practice horizon can be attached in place of the normal telescope. This works with sextants manufactured by Cassens & Plath. The practice horizon is not suitable for Davis plastic sextants.On the right side, the user looks over the sextant mirrors toward the celestial body and a horizontal line. To make an observation, the user holds the sextant vertically as usual. A bubble in the spirit level must align with the horizontal line. The celestial body is also centered on the horizontal line. When observing the Sun, its lower edge is used.The artificial training horizon is intended solely for training purposes and isNOT suitablefor navigation.You can find an artificial navigation horizon with BSH certification for commercial shipping (Item No. 3716-103) further down the page under “Related Items.”
MOB sail (200 x 300 x 300 cm) made of water-permeable, tear-resistant polyester fabric (according to EN 471).The pack bag can be permanently attached to the stanchions with two loops with snap hooks so that the safety sail is quickly ready for use at any time.Two further snap hooks are pegged and a halyard attached to the sail head to bring a person who has fallen overboard back on board in a gentle, horizontal position.Thanks to steps and straps, the sail can also be used very well as a swimming ladder.Supplied in a red polyester pack bag. Sail colour: signal yellow with reflective stripes. Weight: 5.4 kg.
T-strips made of A4 stainless steel (AISI 316). Item No. 5057-100 made of A2 stainless steel.The surface is polished.
The waterproof LED hand-held spotlight offers a light range of up to 400 meters and can be adjusted in two brightness levels. There is an additional 6-watt LED work light on the back of the headlamp that can be used as a lantern. Power is supplied by two rechargeable lithium batteries. The headlamp is charged via a USB type C cable, which is included in the scope of delivery. Overcharge protection and an integrated charge amplifier circuit ensure safe and efficient use.Technical details: Lighting range: Up to 400 metersFront brightness: High: 2000 lumens (4.5-5 hours runtime)Low: 1000 lumens (12-13 hours runtime)SOS mode: 35-36 hours runtimeRear light:6W LED work light500 lumens, range 25 meters, runtime 11-12 hoursBatteries: Two 18650 lithium batteries (7.4V, 2600 mAh)Charging time: 5-6 hours (at 5V, 1A)Protection class: IP67 (dustproof, protected against the effects of temporary immersion in water)Material: Aluminum, ABS, PC, rubber and TPRFunctions:4-stage switch with magnetic catch: Low/High/SOS (flashing)/OffBattery-saving mode through automatic dimming when brightness or temperature is detectedFold-out holder for stationary useRemovable red filter lensWrist strap with integrated rescue whistleStorage compartment for the USB charging cableLED types:Front light: Cree XHP50.2, 20W LEDRear light: Cree XP-G3, 6W LED
Leather sailmaker's palm. Made in England, number 2 1/2.Steel needle plate with a brass frame, reinforced leather over the palm. With buckle.Light palm for sewing and light rigging work.Right- or left-handed.
Versatile woven fabric tapes are ideal for reinforcing chines, hull/deck corners and similar structural applications.When bonded with WEST SYSTEM epoxy, they provide additional tensile strength to resist hairline crack development and abrasion.Available in 10 m pieces and 50 m rolls.
Heavy ship's bell with exceptionally canorous sound made from brass. Handmade in Germany, using a traditional sand-casting technique. Every bell is cleanly dressed to size and polished after casting, the top and suspension bracket are left unpolished. The bells are not varnished.
Brass port, polished or chromed finish, with a mounting depth of 50 mm.Comes ready for installation, complete with matching sleeve screws and outer ring.Use: boatbuilding (only in protected areas of the boat, see CE certificate), decoration and interior building - not intended for the outer hull of a seagoing boat.An inexpensive, but nevertheless functional port! Design with hardened glass.Not CE certified.
High-strength swivel shackle (anchor-chain connector), made from A4 stainless steel (AISI 316L) by the manufacturer WASI.The ball link absorbs even sideways pulls on the anchor shaft without jamming. The breaking strength is up to 300% that of the matching chain.Tested and certified by Germanisher Lloyd (GL).
Hemp coloured braided 8 strand rope made from high quality polyester (PES) worsted yarn with a "cotton like" surface and with the look and feel of natural cordage.Very soft, flexible and handy line with good UV resistance.Very well suited for flag lines and log lines, as well as braided lines for the many needs on a traditional ship.
