Manufacturer Navigation
Our brands from A-Z
-
(191)
S & B Beschläge
-
(9)
Salamander
-
(5)
SCANSTRUT
-
(35)
Schatz
-
(3)
Scotch
-
(2)
Sea-Line
-
(14)
Seajet
-
(7)
SEASTAR SOLUTIONS
-
(45)
Secumar
-
(13)
Selden
-
(1)
Selma
-
(4)
Separ
-
(10)
SFC Energy AG
-
(2)
Sheffield
-
(8)
Shurflo
-
(12)
Sigma
-
(1)
Sigmar
-
(15)
Sika
-
(2)
Silentwind
-
(12)
Silva
-
(3)
SJÖ & HAV
-
(1)
Skotti
-
(11)
Skylotec
-
(5)
Solara
-
(2480)
Sonstige Hersteller
-
(13)
Sörensen
-
(28)
Spartan
-
(1)
Speedy Stitcher
-
(5)
SPUNFLEX
-
(12)
Stazo
-
(4)
Steiner
-
(7)
STELTON
-
(23)
Sterling
-
(3)
STIMPSON
-
(11)
Sundström
-
(2)
Sunnex
-
(2)
Superwind
Produkte von Sonstige Hersteller
Small, very robust lashing hook made from tumbled bronze with matt finish.
Eye bolt made from high tensile aluminium bronze with large base plate (diameter 50 mm) in the design of the classic deck eye.
tumbled brass with matt finish, for fitting to the shroud with 4 screws.
Robust classic deck vent.Strong bronze design, tumbled matte finish, self-sealing.For the constant ventilation of the engine room, anchor locker, bilge etc.The wooden valve ball automatically closes the vent, when the deck gets flooded. A hose can be connected below.
Heavy-duty mooring bitt with bar. Traditionally shaped with a distinctive, lively appearance. Versatile in use. Well suited as a central bow bitt on cutters and workboats. The smaller version is also suitable for mounting on leeboard guards (aanvaringsklamp) of medium-sized dutch sailing barges, serving as an auxiliary or centre bitt.Hollow-cast in bronze, base plate with four countersunk holes.Surface finely matt-tumbled. Made in Europe.
Bronze deck eye or pad eye with D-ring, which can be folded over by 90 degrees.Material: cast bronze with matt finish.
High sided mushroom vent made from strong cast bronze.The high edge stops white water on deck from entering.The convex cover is designed with little overhang in order not to catch loose sheets or lines, when closed.Surface: tumbled matt finish.
Extra small design for sailing dinghies and small cruisers made from cast bronze. The vent is mounted flush on deck.The cover closes tight when shut.Surface: tumbled matt finish.
Bronze, tumbled matt finish.Extra low level design with large diameter for ideal air transport.
Strong bronze stanchion socket with a lip and a compact five-cornered ground plate, as well as a support on the side.Two designs: 90° or with 6° angle of inclination for slanted decks.Surface: tumbled with matt finish.
Robust, elegant shell vent, made from cast bronze with tumbled matt finish.Qualified for horizontal or vertical mounting on deck or for the covering of openings in hull or superstructure.
Cam cleat fully made from bronze.With bronze sliding bearing and stainless steel springs. Surface: tumbled with matt finish.Also available with permanently mounted leading bracket made from bronze.
Bronze deck eye with long-oval ground plate.Material: tumbled bronze with matt finish.
Very strong cam cleat made from cast bronze with tumbled matte finished surface. Three screwholes in bottom plate.
Very strong pollard cleat made from cast bronze with tumbled matte finished surface. Two screwholes in bottom plate.
Beautiful designed bar cleat for cruisers and small yachts with solid bronze stands and an oval teak bar (L 250 mm).The bollard stands were designed in the 30s and have an extended lower flap through which the bar is fixed by a screw. The extension also protects the wood when a line is veered.The stands are also available separately, for example for a hand rail.
Strong, beautifully designed bar cleat with solid bronze stands and an oval teak bar, designed for large classic yachts.The bollard stands from tumbled bronze with matt finish have extended lower flaps on both sides, which protect the wood when a line is veered.
Very strong bronze cleat with a bar in the typical Herreshoff design and with very long studs, in order to be able to belay a couple of thick mooring lines on the cleat.This cleat was designed with a large classic cutter yacht in mind.Solid cast bronze without bore holes, surface: tumbled matt finish.
Beautiful, slim design of the classic deck cleat. The high legs allow several lines to be laid at the same time. The dark cast bronze fitting is of European manufacture. The strong design and four well-dimensioned countersunk holes ensure sufficient strength on deck.Surface: fine matt tumbled.
In the classic design of deck cleats, though with higher studs so that thicker lines can also be belayed.Solid cast bronze, surface tumbled matt finish. Made in Europe.
Deck cleat with a lowered centre in the bar, so that the crossing ropes do not come up too high.Made from very strong cast bronze and solid legs.Surface: tumbled matt finish.Shipping without bore holes.
Solid bronze jam cleat for 8-10 mm strong lines. The centre part of the cleat forms a fairlead eye in between the studs. The jammed line does not create a chocking effect on the screws and does not chafe the varnish. Surface: tumbled with matt finish.
Massive cockpit scupper with return stop made from bronze: the floating ball inside the casting prevents the water from the outside to enter.The size of the drain nevertheless provides a speedy drainage of the cockpit.The sieve is only screwed in, thereby allowing easy cleaning access.A taper pipe thread of 1 1/4" provides for an individual hookup.
This proven reference book contains a summary of all the basic information a skipper needs at sea. In a practical pocket format, it is equipped with numerous clear tables and schematic drawings.Information on electronic and classic navigation, calculating positions, distances and tides is complemented by chapters on traffic rules and safety at sea, meteorology or knot tutorials. With this book, Malcolm Pearson offers the best information for beginners and advanced sailors. An excellent handbook for the on-board library.204 pages, 4 colour pictures and 243 drawings, size 16 x 10 cm, paperback. German edition.
